AS 2118.10-1995 Automatic fire sprinkler systems, Part 10: Approval documentation
Standards Australia
Supersedes: AS 2118-1982 Automatic fire sprinkler systems (known as the SAA Code for Automatic Fire Sprinkler Systems)
Supersedes: AS 2118-1982 AMDT 1 Automatic fire sprinkler systems, Part 10: Approval documentation
Supersedes: AS 2118-1982 AMDT 2 Automatic fire sprinkler systems, Part 10: Approval documentation
Draft Designation: DR 92189Reconfirmed by: AS 2118.10-1995 Rec:2013 Automatic fire sprinkler systems, Part 10: Approval documentation
This Standard is the result of a consensus among representatives on the joint committee to produce it as an Australian Standard.
The revisions to AS 2118 have included Standards Australia’s requirements to keep product and installation Standards separate. When complete the series will comprise:
AS
2118 Automatic fire sprinkler systems
Part 1: Standard
Part 2: Wall wetting sprinklers (Drenchers)
Part 3: Deluge
Part 4: Residential
Part 5: Domestic
Part 6: Combined sprinkler and hydrant
Part 9: Piping support and installation
Part 10: Approval documentation
4118 Fire sprinkler systems
Part 1.1: Components—Sprinklers and sprayers
Part 1.2: Components—Alarm valves (wet)
Part 1.3: Components—Water motor alarms
Part 1.4: Components—Valve monitors
Part 1.5: Components—Deluge and pre-action valves
Part 1.6: Components—Stop valves and non-return valves
Part 1.7: Components—Alarm valves (dry)
Part 1.8: Components—Pressure reducing valves
Part 1.9: Components—Accelerators and exhausters
Part 2.1: Piping—General
The terms ‘normative’ and ‘informative’ have been used in this Standard to define the application of the appendix to which they apply. A ‘normative’ appendix is an integral part of a Standard, whereas an ‘informative’ appendix is only for information and guidance.
Reconfirmed: 2013-07-11 Originated as part of AS CA16-1939. Previous edition AS 2118-1982. Revised and redesignated in part as AS 2118.10-1995.This Standard specifies requirements for the information to be provided for the approval of standard fire sprinkler systems in accordance with AS 2118.1 and automatic wall wetting sprinkler (Drencher) systems in accordance with AS 2118.2
Contents:
Section 1: Scope And General
Section 2: Requirements
Appendix A: Standard System Completion Certificate
Appendix B: Wall Wetting Sprinkler (Drencher) System Completion Certificate
Automatic Sprinkler Installations.
Asset Services-Department of Administrative Services; Australian Building Codes Board; Australian Chamber of Commerce and Industry; Australian Chamber of Manufactures; Australian Fire Authorities Council; Australian Water and Sewerage Authorities; Commonwealth Fire Board; CSIRO-Division of Building, Construction and Engineering; Department of Defence; Fire Protection Industry Association of Australia; Institution of Engineers, Australia; Insurance Council of Australia; Master Plumbers and Mechanical Services Association of Victoria; Melbourne Water; New Zealand Fire Equipment Association; Telecom Australia; Testing Interests; The Association of Consulting Engineers, Australia.
