Skip to main content

AS 4654.1-2012 Waterproofing membranes for external above-ground use, Part 1: Materials

Standards Australia

Version:  Second Edition 2012.  (Pending Revision)
error_outline
You are currently viewing a preview version of this resource. Sign in or subscribe for full access.
Publication date
14-09-2012
Pages
24
Current status
Pending Revision
Document Number
4654
Description

This  Standard  has  been  prepared  in  response  to  numerous  requests  from  industry  
representatives in the field of external waterproofing, especially in the areas of roofs, decks
and balconies.

The  objective  of  this  Standard  is  to  provide  a  consistent  and  reliable  approach  to  the  
materials used in the design and installation of external waterproofing membrane systems.

The objective of this revision is to align this Standard with the protocols and requirements
as set out by the Australian Building Codes Board (ABCB).

This Standard is Part 1 of a series of Standards on external waterproofing, as follows:

AS
4654 Waterproofing membrane systems for external above-ground use
4654.1 Part 1: Materials
4654.2 Part 2: Design and installation

The  term  ‘normative’  has  been  used  in  this  Standard  to  define  the  application  of  the  
appendix to which it applies. A ‘normative’ appendix is an integral part of a Standard.

First published as AS 4654.1 2009. Second edition 2012.

Scope

This  Standard  sets  out  requirements  for  waterproofing  membranes  for  external  above-
ground use, installed in accordance with AS 4654.2.

Contents:

Foreword  
1.1 Scope   
1.2 Normative References   
1.3 Definitions   
1.4 Membrane Systems   
1.5 Exposed And Protected Systems   
Section 2 Testing
2.1 Scope Of Section   
2.2 Conformance Conditions   
2.3 Abrasion Resistance  
2.4 Bond Strength To Substrate  
2.5 Field Seam Strength  
2.6 Temperature Resistance  
2.7 Resistance To Ultraviolet Light  
2.8 Bioresistance Of Membranes   
2.9 Root Resistance  
Appendix A: Classification And Properties   
Appendix B: Assessment Of Resistance Of Waterproofing Membranes To Cyclic Movement

Committee

External Waterproofing Membranes.

BD-038

Australian Building Codes Board; Australian Chamber of Commerce and Industry; Australian Institute of Waterproofing; Australian Tile Council; CSIRO Manufacturing and Infrastructure Technology; Housing Industry Association; Importers Distributors and Sealants Manufacturers Association of Australia; Master Builders Australia; South Australian Housing Trust; TAFE NSW.

ISBN
978 1 74342 225
Attribution
Standards Australia 2012.
Licence
© All Rights Reserved
NSW
VIC
QLD
NT
WA
ACT
TAS
SA
Sector
Residential
Civil
Commercial
Industrial
AS 4654.1-2012 Waterproofing membranes for external above-ground use, Part 1: Materials 2012 cover