Search all content

1 - 10 of 24 results
AS/NZS 3837:1998 Method of test for heat and smoke release rates for materials and products using an oxygen consumption calorimeter 1998 cover

Standards Australia/Standards New Zealand

Version:  First Edition 1998.  (Current)
Sets out a test method for the determination of ignitability, heat release rates, mass loss rates, effective heat of combustion and smoke release of materials and products when exposed to controlled levels of radiant heating.
AS/NZS 4836:2023 Safe working on or near low-voltage and extra-low voltage electrical installations and equipment 2023 cover

Standards Australia/Standards New Zealand

Version:  Third Edition 2023.  (Current)
Outlines principles, guidelines and procedures for safe work on or near low-voltage and extra-low voltage electrical installations and equipment; provides a minimum set of procedures, safety requirements and recommendations to manage the hazards associated with electricity, specifically arc blast, arc flash, electric shock, and electrocution.
AS/NZS 1530.3:1999 Methods for fire tests on building materials, components and structures, Part 3: Simultaneous determination of ignitability, flame propagation, heat release and smoke release 1999 cover

Standards Australia/Standards New Zealand

Version:  First Edition 1999.  (Current)
Describes a single test method for grading building materials on the basis of ignition tendency, flame spread, heat development and tendency to produce smoke.
AS/NZS 3004.1:2014 Electrical installations - Marinas and boats, Part 1: Marinas 2014 cover

Standards Australia/Standards New Zealand

Version:  Second Edition 2014.  (Current)
Sets out requirements for electrical installations associated with marinas supplied at low-voltage a.c. supply systems (i.e. exceeding 50 V a.c. but not exceeding 1000 V a.c.
AS/NZS 3003:2018 Electrical installations - Patient areas 2018 cover

Standards Australia/Standards New Zealand

Version:  Sixth Edition 2018.  (Current)
Specifies safety requirements for electrical installations in areas where it is intended that low-voltage medical electrical equipment will be used on a patient; it applies to new electrical installations and to alterations, additions and repairs of existing electrical installations.
AS/NZS 3004.2:2014 Electrical installations - Marinas and boats, Part 2: Boat installations 2014 cover

Standards Australia/Standards New Zealand

Version:  Second Edition 2014.  (Current)
Specifies requirements for the design, construction and installation of electrical systems in boats that have a length of up to 50 m, and are designed for use on inland waters or at sea.
AS/NZS 3008.1.1:2017 Electrical installations - Selection of cables, Part 1.1: Cables for alternating voltages up to and including 0.6/1 kV - Typical Australian installation conditions 2017 cover

Standards Australia/Standards New Zealand

Version:  Third Edition 2017.  (Current)
Sets out a method for cable selection for those types of electrical cables and methods of installation that are in common use at working voltages up to and including 0.6/1 kV at 50 Hz a.c.
AS/NZS 3000:2018 Amd 3:2023 Electrical installations (known as the Australian/New Zealand Wiring Rules) 2023 cover

Standards Australia/Standards New Zealand

Version:  Third Edition 2023.  (Current)
AS/NZS 3000:2018 is amended as follows.
AS/NZS 2293.1:2018 Emergency lighting and exit signs for buildings, Part 1: System design, installation and operation 2021 cover

Standards Australia/Standards New Zealand

Version:  First Edition 2018.  (Current)
Specifies requirements for the design and installation of emergency lighting and illuminated emergency exit signage systems for buildings. Central battery, single point and self-contained systems are included.