Search all content

Current document versions only

1 - 9 of 9 results

Book 2 - Guide to External Waterproofing - Balcony Decks 2017 cover

Name

Book 2 - Guide to External Waterproofing - Balcony Decks

Publisher

Master Builders NSW

Version: 2017 Revised Edition. (Current)

A guide to waterproofing of balconies and decks.

5 results

found in this document show

Page 6

… INTRODUCTION AND OVERVIEW The creation of this manual for best practice in the waterproofing of external areas is the result of a chance meeting of several … The minimum performance requirements for waterproofing are set out in the National Construction Code (NCC)/Building Code of Australia (BCA). As of the time of producing this guide for high …

Page 7

… Contents | Tables and Illustrations CHAPTER 1: WATERPROOFING SYSTEM CONSIDERATIONS 1 ■ 1.0 INTRODUCTION AND OVERVIEW The minimum performance requirements for waterproofing are set out in the National Construction Code of Australia (NCC)/Building Code of Australia (BCA). As of the time of printing this guide, … “Guides to Waterproofing” series of guides is to document current high quality building practice with the intent of reducing the high incidence of waterproofing failures. ■ 1.1 …

Page 11

… CHAPTER 2: EXPOSURE CATEGORY CLASSIFICATIONS 2 ■ 2.1 TERRAIN CATEGORIES For the purpose of this guide, Terrain Categories I and II as defined by AS 2048-1977 Code of Practice for Installation and Maintenance of Aluminium Windows in Buildings are termed ‘Exposed …

Page 124

… CHAPTER 17: PLAN AND PREPARE ■ 17.1 GENERAL INFORMATION Plan And Prepare For Waterproofing Installation Pre-installation considerations 1. Confirm that the recommended preparatory … and Safety Act 2011, Work Health and Safety Regulation 2011 other relevant legislation and the Codes of Practice for WHS Consultation and Risk Assessment. For specific information, contact SafeWork …

Page 133

… ■ 19.9 CLEANING UP The work area needs to be cleared and unused materials need to be disposed of, stored for re-use and or recycled according to appropriate legislation, regulations, and codes of practice and the job specification. Plant, tools and other equipment needs to be cleaned, …

AS 4773.2:2015 Masonry in small buildings, Part 2: Construction 2015 cover

Name

AS 4773.2:2015 Masonry in small buildings, Part 2: Construction

Publisher

Standards Australia

Version: Second Edition 2015. (Current)

Specifies requirements for construction practices for masonry in buildings of Class 1 and Class 10a, as defined in the National Construction Code (NCC), designed in accordance with AS 4773.1 and to be constructed from clay, concrete, or calcium silicate masonry units.

1 results

found in this document show

Page 7

… SECTI ON 1 SCOPE AND GENERAL 1.1 SCOPE This Standard specifies requirements for construction practices for masonry in buildings of Class 1 and Class 10a, as defined in the National Construction Code (NCC), designed in accordance with AS 4773.1 and to be constructed from clay, concrete, or …

Book 3 - Guide to Planter Box Waterproofing 2017 cover

Name

Book 3 - Guide to Planter Box Waterproofing

Publisher

Master Builders NSW

Version: 2017 Revised Edition. (Current)

A guide to waterproofing of planter boxes.

3 results

found in this document show

Page 6

… Contents | Tables and Illustrations PREAMBLE AND CREDITS The creation of this manual of best practice in the waterproofing of external areas is the result of a chance meeting of several … The minimum performance requirements for waterproofing are set out in the National Construction Code 2016 (NCC). In 2012 two Australian Standards were published for External Waterproofing, …

Page 14

… core concrete block work, they must be reinforced and core filled with concrete. ■ Inside face of block walls should be struck flush with voids filled and protrusions ground smooth or the … be rendered. A bagged finish on the inside face of a block planter box wall is not accepted practice because it creates a friable substrate that will not support a bonded overlaying … that exceed 6 meters in length will require movement joints in accordance with the masonry code. It is preferable to reduce the size of the planters to avoid the installation of movement …

Page 85

… Requirements Identify signage, barricade and scaffolding requirements: Contact the site safety officer to determine site-specific safety requirements, which can include: ■ Site induction ■ … and Safety Act 2011, Work Health and Safety Regulation 2011 other relevant legislation and the Codes of Practice for WHS Consultation and Risk Assessment. For specific information, contact SafeWork …

Book 4 - Flashings and Damp-Proof Courses 2017 cover

Name

Book 4 - Guide to Flashings and Damp-Proof Courses

Publisher

Master Builders NSW

Version: 2017 Revised Edition. (Current)

A guide to waterproofing of flashings and damp proof courses.

Book 1 - Guide to Internal Wet Area Waterproofing cover

Name

Book 1 - Guide to Internal Wet Area Waterproofing

Publisher

Master Builders NSW

Version: 2017 Revised Edition. (Current)

A guide to internal wet areas waterproofing.

2 results

found in this document show

Page 49

… ■ 10.5 CLEANING UP The work area needs to be cleared and unused materials need to be disposed of, stored for re-use and or recycled according to appropriate legislation, regulations, and codes of practice and the job specification. Plant, tools and other equipment needs to be cleaned, …

Page 115

… Contents | Tables and Illustrations CHAPTER 20: THE WATERPROOFING PROCESS ■ 20.1 WORK INSTRUCTIONS Identify who has authority to issue work instructions, … and Safety Act 2011, Work Health and Safety Regulation 2011 other relevant legislation and the Codes of Practice for WHS Consultation and Risk Assessment. For specific information, contact SafeWork …

AS 2699.1:2020 Built-in components for masonry construction, Part 1: Wall ties 2020 cover

Name

AS 2699.1:2020 Built-in components for masonry construction, Part 1: Wall ties

Publisher

Standards Australia

Version: First Edition 2020. (Current)

This Standard specifies requirements for wall ties for use in tying together the leaves of cavity masonry walls, masonry veneer walls and loadbearing frames, and masonry veneer walls against a strong backing wall.