Search all content

Current document versions only

1 - 10 of 36 results

Lead in Plumbing Products: Implementation Plan 2022 cover

Name

Lead in Plumbing Products: Implementation Plan

Publisher

Australian Building Codes Board

Version: 2022. (Current)

From 1 September 2025, only products conforming to the lead free provisions, where required, will be authorised for use in plumbing installations.

2 results

found in this document show

Page 3

… 1 Implementation of low lead requirements … 1 National Construction Code 2022 … 2 WaterMark Schedule of Products … 5 Alignment with international practice … 5 Compliance at the point of … 6 Monitoring transition of certification … 7 JAS-ANZ surveillance of WMCABs … 8 Australian Building Codes Board ii …

Page 8

… with drinking water must meet the 0.25% lead requirement. In determining the application of the lead free requirements, the following aspects were considered for each product to determine the applicability of lead free requirements: Alignment with international practice To ensure that Australia does not include more stringent requirements than the … they not in use; and the water dispensed is not intended to be consumed. Australian Building Codes Board 5 …

Design and Building Practitioners Regulation 2021 cover 2021

Name

Design and Building Practitioners Regulation 2021 (NSW)

Publisher

NSW Government

Version: 2021 (Current)

This Regulation is the Design and Building Practitioners Regulation 2021. (NSW legislation.)

7 results

found in this document show

Page 6

… ............................................................. 44 97 Alternative pathways for professional engineers and certain design practitioners .......................................... … 45 99 Application of Division … 46 102 Duration of deemed registration … 47 103 Evidence of deemed registration … 47 104 Return of cancelled, suspended or varied registration … .............................................................................. 81 Schedule 4 Code of …

Page 21

… notice to the Secretary that it no longer has a nominee in that class. (5) For the purposes of section 50(2) of the Act, it is a condition of registration as a practitioner that the registered practitioner must comply with the code of practice— (a) for a prescribed practitioner—set out in Schedule 4, Part 2, Division 1, or (b) …

Page 83

… Design and Building Practitioners Regulation 2021 [NSW] 5 Requirements for registered professional engineers (1) A registered professional engineer must successfully complete … of the hours to the next year in a way approved by the Secretary in the Guidelines. Schedule 4 Code of practice clause 36(5) Part 1 Preliminary 1 Definitions In this Schedule— client of a registered …

Page 84

… Regulation 2021 [NSW] work to which this Schedule applies. relevant work means the preparation of a regulated design, provision of a compliance declaration or carrying out of building work by a prescribed practitioner. Part 2 Code of practice Division 1 Code of practice for prescribed practitioners 2 Duties apply to prescribed …

Page 85

… Practitioners Regulation 2021 [NSW] (a) manage and disclose potential or actual conflicts of interest to a client of the practitioner, and (b) avoid actual conflicts of interest if … including in relation to a client, is held securely by the prescribed practitioner. Division 2 Code of practice for professional engineers 8 Duties apply to professional engineers when acting as …

Page 89

… Design and Building Practitioners Regulation 2021 [NSW] 19 Duties regarding supervision of other persons A registered professional engineer who directly supervises a person who is not … in accordance with the requirements prescribed by the Act and this Regulation, including this code of practice, or another Act or law. Schedule 5 Penalty notice offences 1 Application of Schedule …

Page 90

… Section 33(1) $1,650 $5,000 Section 51(4) $1,650 $5,000 Section 56, including a contravention of the code of practice in this Regulation, Schedule 4, but only for clauses 6(3), 7(1), 15(3) and 16(1) of the …

Building Confidence: Improving the effectiveness of compliance and enforcement systems for the building and construction industry across Australia 2018. cover

Name

Building Confidence: Improving the effectiveness of compliance and enforcement systems for the building and construction industry across Australia

Publisher

Australian Government

Version: 2018. (Current)

Commissioned in 2017 by the Building Ministers’ Forum (BMF) to assess the effectiveness of compliance and enforcement systems for the building and construction industry across Australia and to examine a range of issues outlined in comprehensive terms of reference for their work. in particular the report focusses in a succinct way on shortcomings in the implementation of the National Construction Code (NCC).

15 results

found in this document show

Page 3

… Contents Foreword 1 Executive Summary 3 Summary of Recommendations 5 Background 6 The Terms of Reference Consultation Review of previous reports … 6 6 6 7 Introduction 9 A performance-based approach to building regulation Modern construction practices for multi-storey residential buildings The role of the private building surveyor The … fire safety design Recommendation 9—Integrity of private building surveyors Recommendation 10—Codes of conduct for building surveyors Recommendation 11—Role of building surveyors in …

Page 5

… for the building and construction industry. It includes our recommendations for a national best practice model which will strengthen the effective implementation of the National Construction Code. You commissioned our expert advice in August 2017. Throughout the process, you engaged …

Page 7

… Summary In mid-2017 the Building Ministers’ Forum (BMF) asked us to undertake an assessment of the effectiveness of compliance and enforcement systems for the building and construction … focusses in a succinct way on shortcomings in the implementation of the National Construction Code (NCC). They will not come as a surprise to the BMF or building industry stakeholders as … and enforcement systems that incorporate our recommendations represent a national best practice model that will strengthen the effective implementation of the NCC. A wide range of …

Page 11

… Across the globe, in the wake of the Grenfell Tower fire, the UK is undertaking a review of its building regulation system. In … [UK] system of regulation, covering what is written down and the way in which it is enacted in practice, is not fit for purpose, leaving room for those who want to take shortcuts to do so”.5 … Territories to continue in existence and provide for the operation of the Australian Building Codes Board 2017. Australian Building Codes Board (ABCB) is a standards writing body that is …

Page 13

… Introduction A performance-based approach to building regulation The NCC is one of the most important initiatives of the Council of Australian Governments (COAG). Many have … be constructed, the NCC states how a building or building element is required to perform. The code sets out explicit objectives, listed as a hierarchy of requirements. It is not intended to … to be contrasted with traditional prescribed building codes that mandate specific construction practices. There are clear economic and aesthetic benefits to a performance-based approach: new …

Page 14

… Confidence in the NCC requires an effective disclosure regime. It needs to incorporate a number of elements. The public should be able to see how governments enforce the NCC. Decisions made … of interest with developers, builders or owners. “The “Deemed to Satisfy” provisions of the Code have long been standard practice. However, in the “Performance Based” solutions provisions there is great latitude and …

Page 16

… “The private building surveyor regime has led to a culture of complacency and an element of not rocking the boat or biting the hand that feeds you. The … around the country is that they are expected to undertake enforcement related to the poor practices of private building surveyors without being adequately resourced. They also argue that … be achieved through statutory controls to mitigate conflict of interest (Recommendation 9), a code of conduct (Recommendation 10) and mandatory reporting obligations (Recommendation 11). The …

Page 18

… A better system of harmonisation A common theme in our consultations was the call for greater harmonisation in … to pursue improvement, it should be seeking a commitment to develop a model NCC Administrative Code to harmonise expectations regarding the aspects identified in the terms of reference for … jurisdictions and their appreciation for each other’s systems. The dissemination of good practice will be enhanced. Under the most recent ABCB Intergovernmental Agreement (ABCB IGA), …

Page 22

… is merit in this approach. Well-run industry accreditation can ensure that the competencies of practitioners are tailored to their area of work and can alleviate state or territory … Building practitioners operate in a dynamic environment. New products, technologies and practices are actively encouraged through the performance-based NCC which, itself, is amended … to undertake compulsory Continuing Professional Development on the National Construction Code. Implementing the recommendation Regulators need to have mechanisms to identify common …

Page 27

… Recommendation 8—Collaboration with fire authorities in the development of fire safety design The problem identified Fire authorities play a role in the building … has been endorsed by the fire safety industry and is published by the ABCB.16 It contains best practice for the development of fire engineering designs and includes an obligation to engage … for fire engineers and building surveyors would be to formulate a nationally consistent code of conduct for fire engineers and building surveyors based on the IFEG. A failure to comply …

AS 1288:2021 Glass in buildings - Selection and installation 2021 cover

Name

AS 1288:2021 Glass in buildings - Selection and installation

Publisher

Standards Australia

Version: Fifth Edition 2021. (Current)

Sets out procedures for the selection and installation of glass in buildings, subject to wind loading, human impact, and special applications. Glass strength is specified, based on the tensile stresses on the surface of the glass.

1 results

found in this document show

Page 4

… by the Joint Standards Australia/Standards New Zealand Committee BD‑007, Glazing and Fixing of Glass, to supersede AS 1288—2006. The objective of this document is to provide uniform … and to clarify technical definitions. This document will be referenced in the Building Code of Australia 2022; thereby superseding AS 1288—2006. The most significant changes of this … Sections 1, 6 and 7 only). This document makes recommendations for design and installation practice based on proven techniques. Notes to the text contain information and guidance. They …

Work Health and Safety Act 2011 No 10 cover

Name

Work Health and Safety Act 2011 No 10 (NSW)

Publisher

NSW Government

Version: 2020. (Current)

This Act is the Work Health and Safety Act 2011. (NSW legislation.)

8 results

found in this document show

Page 13

… 120 268 Offence to give false or misleading information … 120 269 Act does not affect legal professional … 121 271 Confidentiality of information … 122 271B Provision of information from Health Secretary to regulator … 124 271F National register of dust … 126 Division 2 Codes of … 126 274 Approved codes of practice … 126 275 Use of codes of practice in proceedings …

Page 15

… and (g) providing a framework for continuous improvement and progressively higher standards of work health and safety, and (h) maintaining and strengthening the national harmonisation of … Division 3 Interpretation Subdivision 1 Definitions 4 Definitions In this Act— approved code of practice means a code of practice approved under Part 14. authorised, in Part 4—see section 40. …

Page 58

… notice to be in writing A provisional improvement notice must be in writing. 92 Contents of provisional improvement notice A provisional improvement notice must state— (a) that the … relates. (2) A direction included in a provisional improvement notice may— (a) refer to a code of practice, and (b) offer the person to whom it is issued a choice of ways in which to remedy the …

Page 96

… to comply with a non-disturbance notice issued to the person. Maximum penalty— (a) in the case of an individual—575 penalty units, or (b) in the case of a body corporate—2,885 penalty units. … notices A direction included in an improvement notice or prohibition notice may— (a) refer to a code of practice, and (b) offer the person to whom it is issued a choice of ways in which to remedy the …

Page 126

… Work Health and Safety Act 2011 No 10 [NSW] (3) The offence against this section can only be prosecuted by a person who can bring a prosecution for … penalty units, or (b) in the case of a body corporate—290 penalty units. Division 2 Codes of practice 274 Approved codes of practice (1) The Minister may approve a code of practice for the …

Page 127

… Work Health and Safety Act 2011 No 10 [NSW] (6) The regulator must ensure that a copy of— (a) each code of practice that is currently approved, and (b) each document applied, adopted or incorporated (to …

Page 134

… 10 [NSW] (2) Any such provision may, if the regulations so provide, take effect from the date of assent to the Act concerned or a later date. (3) To the extent to which any such provision … Definition In this Part— OHS Act means the Occupational Health and Safety Act 2000. 3 Industry codes of practice An industry code of practice approved and in force under Part 4 of the OHS Act …

Page 143

… and Safety Act 2011 No 10 [NSW] (2) It is a defence to any proceedings against a person for an offence against subclause (1) if the person proves that— (a) it was not reasonably practicable … its repeal, continues to have effect in relation to the offence against clause 3 (1). (2) A code of practice in force immediately before the repeal of the Rural Workers Accommodation Act 1969 by …

Name

Work Health and Safety Regulations 2011 (FEDERAL)

Publisher

Australian Government

Version: No. 262, 2011 (Current)

This is a compilation of the Work Health and Safety Regulations 2011 that shows the text of the law as amended and in force on 1 December 2019 (the compilation date). (FEDERAL legislation.)

6 results

found in this document show

Page 23

… Subdivision 5—Duties of persons conducting businesses or undertakings that supply plant 735 409 Duties … period for GHS ......................................................... 415 Division 3—Codes of practice 761 416 Preserved codes of practice ........................................................... 416 Schedule …

Page 245

… relating to safety data sheets and other matters Division 2 Regulation 341 (b) In the case of a body corporate—$30 000. Note: Section 12F of the Act provides that strict liability applies … (b) was, at the time it was manufactured or imported, labelled in accordance with the National Code of Practice for the Labelling of Workplace Substances [NOHSC: 2012 (1994)] as in force at that …

Page 246

… sheets and other matters Regulation 342 (3) Subregulation (2) ceases to be in force at the end of 31 December 2023. 342 Labelling hazardous chemicals—containers (1) A person conducting a … decanted from its original container at the workplace, labelled in accordance with the National Code of Practice for the Labelling of Workplace Substances [NOHSC: 2012 (1994)] as in force at that …

Page 436

… and completed) any process associated with the installation, construction or commissioning of the plant or structure before 1 January 2012. 737 Plant used in connection with tree … lopping—lead in time for application of regulation 221 Regulation 221 does not apply until a code of practice for the use of plant in connection with tree lopping that has been approved under …

Page 441

… and saving provisions Chapter 12 Other transitional matters Part 12 Globally Harmonised System of Classification and Labelling of Chemicals Division 1 Regulation 759 Part 12—Other … in the table, as in force when the person complies with the standard. Item Standard 1 The ADG Code 2 Approved Criteria for Classifying Hazardous Substances [NOHSC: 1008 (2004)] 3 National Code of Practice for the Labelling of Workplace Hazardous Substances [NOHSC: 2012 (1994)] 4 Code of …

Page 442

… Chapter 12 Transitional and saving provisions Part 12 Other transitional matters Division 3 Codes of practice Regulation 761 Division 3—Codes of practice 761 Preserved codes of practice For subitem …

AS/NZS 1562.2:1999 Design and installation of sheet roof and wall cladding, Part 2: Corrugated fibre-reinforced cement 1999 cover

Name

AS/NZS 1562.2:1999 Design and installation of sheet roof and wall cladding, Part 2: Corrugated fibre-reinforced cement

Publisher

Standards Australia/Standards New Zealand

Version: First Edition 1999. (Current)

Sets out requirements for the materials, design and installation of corrugated fibre-reinforced cement roof and wall cladding; provides test procedures for the determination of resistance to wind force; appendix gives advice on the provision of roof ventilation.