Search all content

1 - 10 of 118 results
AS/NZS 4836:2023 Safe working on or near low-voltage and extra-low voltage electrical installations and equipment 2023 cover

Standards Australia/Standards New Zealand

Version:  Third Edition 2023.  (Current)
Outlines principles, guidelines and procedures for safe work on or near low-voltage and extra-low voltage electrical installations and equipment; provides a minimum set of procedures, safety requirements and recommendations to manage the hazards associated with electricity, specifically arc blast, arc flash, electric shock, and electrocution.
A guide to Australian building product conformity 2018. cover

Australian Building Codes Board

Version:  2018.  (Current)
A guide for those businesses and building professionals that must ensure the products and materials they procure and use in building and construction are ‘fit for purpose’ and conform and comply with Australian building laws and standards and any other local requirements.
AS/NZS 3004.1:2014 Electrical installations - Marinas and boats, Part 1: Marinas 2014 cover

Standards Australia/Standards New Zealand

Version:  Second Edition 2014.  (Current)
Sets out requirements for electrical installations associated with marinas supplied at low-voltage a.c. supply systems (i.e. exceeding 50 V a.c. but not exceeding 1000 V a.c.
AS/NZS 3003:2018 Electrical installations - Patient areas 2018 cover

Standards Australia/Standards New Zealand

Version:  Sixth Edition 2018.  (Current)
Specifies safety requirements for electrical installations in areas where it is intended that low-voltage medical electrical equipment will be used on a patient; it applies to new electrical installations and to alterations, additions and repairs of existing electrical installations.
AS/NZS 3008.1.1:2017 Electrical installations - Selection of cables, Part 1.1: Cables for alternating voltages up to and including 0.6/1 kV - Typical Australian installation conditions 2017 cover

Standards Australia/Standards New Zealand

Version:  Third Edition 2017.  (Current)
Sets out a method for cable selection for those types of electrical cables and methods of installation that are in common use at working voltages up to and including 0.6/1 kV at 50 Hz a.c.
AS/NZS 3000:2018 Amd 3:2023 Electrical installations (known as the Australian/New Zealand Wiring Rules) 2023 cover

Standards Australia/Standards New Zealand

Version:  Third Edition 2023.  (Current)
AS/NZS 3000:2018 is amended as follows.
Reduction in workplace exposure standard for respirable crystalline silica: For businesses and workers to minimise risks when working with silica 2020 cover

Workplace Health and Safety Queensland

Version:  2020.  (Current)
The national workplace exposure standard for respirable crystalline silica has been halved from an eight hour time-weighted average airborne concentration of 0.1 milligrams per cubic metre (mg/m3) to 0.05 mg/m3; this new workplace exposure standard takes effect in Queensland from 1 July 2020.
Managing respirable crystalline silica dust exposure in the stone benchtop industry: Code of practice 2019 2019 cover

Workplace Health and Safety Queensland

Version:  2019.  (Current)
Silicosis is preventable by using proper controls to eliminate or minimise expo sure to respirable crystalline silica dust in the workplace.
Health monitoring when you work with hazardous chemicals: Guide for workers 2020 cover

Safe Work Australia

Version:  2020.  (Current)
If you are a worker who works with hazardous chemicals, this guide is for you; it explains what you and your PCBU must do to monitor your health and keep you as safe as possible.