Search all content

11 - 20 of 38 results
NCC 2022 Table of BCA 2022 References by BCA 2019 Reference: Lexicon 2022 cover

Australian Building Codes Board

Version:  2022.  (Current)
Maps the NCC 2022 reference with the relevant NCC 2019 reference.
Construction of buildings in flood hazard areas: ABCB Standard 2012 cover

Australian Building Codes Board

Version:  2012.  (Current)
Specifies requirements for flood-resistant design and construction of buildings that are subject to the NCC requirements and that are located, in whole or in part, in flood hazard areas.
Cross-Connection Control Handbook

Australian Building Codes Board

Version:  2023.  (Current)
Assists in understanding cross-connection control and the requirements of NCC Volume Three, the Plumbing Code of Australia (PCA).
Understanding the NCC: Thermal bridging in residential buildings 2023 cover

Australian Building Codes Board

Version:  2023.  (Current)
The following is a general representation and introduction to the DTS Provisions for thermal bridging in residential buildings.
Sound transmission and insulation in buildings 2023 cover

Australian Building Codes Board

Version:  2023.  (Current)
The Sound Transmission and Insulation in Buildings Handbook assists in understanding the sound transmission and insulation requirements in the NCC Volume One and Volume Two.
Whole-of-Home Efficiency Factors Standard 2022

Australian Building Codes Board

Version:  2022.  (Latest)
This ABCB Standard provides WOH efficiency factors for Class 1 dwellings, Class 2 sole-occupancy units and Class 4 parts of buildings in the energy efficiency provisions of the NCC; It applies in each NCC climate zone and jurisdiction.
Livable Housing Design Standard 2022 cover

Australian Building Codes Board

Version:  2022.  (Latest)
Provides a set of technical provisions that if complied with will enable dwellings to better meet the needs of the community, including older people and people with mobility limitations
Fire Safety Verification Method Standard 2022 cover

Australian Building Codes Board

Version:  2022.  (Latest)
Provides a process for engineering the design of fire safety Performance Solutions. The document provides the flexibility required to develop Performance Solutions while still maintaining the level of safety required by the NCC.
AS 4773.2:2015 Masonry in small buildings, Part 2: Construction 2015 cover

Standards Australia

Version:  Second Edition 2015.  (Current)
Specifies requirements for construction practices for masonry in buildings of Class 1 and Class 10a, as defined in the National Construction Code (NCC), designed in accordance with AS 4773.1 and to be constructed from clay, concrete, or calcium silicate masonry units.
AS 2699.1:2020 Built-in components for masonry construction, Part 1: Wall ties 2020 cover

Standards Australia

Version:  First Edition 2020.  (Current)
This Standard specifies requirements for wall ties for use in tying together the leaves of cavity masonry walls, masonry veneer walls and loadbearing frames, and masonry veneer walls against a strong backing wall.