Search all content

11 - 20 of 39 results
NCC 2022 Table of BCA 2022 References by BCA 2019 Reference: Lexicon 2022 cover

Australian Building Codes Board

Version:  2022.  (Current)
Maps the NCC 2022 reference with the relevant NCC 2019 reference.
Construction of buildings in flood hazard areas: ABCB Standard 2012 cover

Australian Building Codes Board

Version:  2012.  (Current)
Specifies requirements for flood-resistant design and construction of buildings that are subject to the NCC requirements and that are located, in whole or in part, in flood hazard areas.
Cross-Connection Control Handbook

Australian Building Codes Board

Version:  2023.  (Current)
Assists in understanding cross-connection control and the requirements of NCC Volume Three, the Plumbing Code of Australia (PCA).
Understanding the NCC: Thermal bridging in residential buildings 2023 cover

Australian Building Codes Board

Version:  2023.  (Current)
The following is a general representation and introduction to the DTS Provisions for thermal bridging in residential buildings.
Sound transmission and insulation in buildings 2023 cover

Australian Building Codes Board

Version:  2023.  (Current)
The Sound Transmission and Insulation in Buildings Handbook assists in understanding the sound transmission and insulation requirements in the NCC Volume One and Volume Two.
AS/NZS 4509.2:2010 Stand-alone power systems, Part 2: System design 2010 cover

Standards Australia/Standards New Zealand

Version:  First Edition 2010.  (Current)
Provides requirements and guidance for the design of stand-alone power systems with energy storage at extra-low voltage and used for the supply of extra-low and/or low voltage electric power in a domestic situation.
AS/NZS 5139:2019 Electrical installations - Safety of battery systems for use with power conversion equipment 2019 cover

Standards Australia/Standards New Zealand

Version:  First Edition 2019.  (Current)
Specifies requirements for general installation and safety requirements for battery energy storage systems (BESSs), where the battery system is installed in a location, such as a dedicated enclosure or room, and is connected with power conversion equipment (PCE) to supply electric power to other parts of an electrical installation.
AS/NZS 4509.1:2009 Stand-alone power systems, Part 1: Safety and installation 2009 cover

Standards Australia/Standards New Zealand

Version:  First Edition 2009.  (Current)
Sets out safety and installation requirements for stand-alone power systems used for the supply of extra-low (ELV) and/or low voltage (LV) electric power to a single load, or an electrical installation in a single residence or building, or a group of residences or buildings and associated items with switchboards to AS/NZS 3000 requirements.
Whole-of-Home Efficiency Factors Standard 2022

Australian Building Codes Board

Version:  2022.  (Latest)
This ABCB Standard provides WOH efficiency factors for Class 1 dwellings, Class 2 sole-occupancy units and Class 4 parts of buildings in the energy efficiency provisions of the NCC; It applies in each NCC climate zone and jurisdiction.
Livable Housing Design Standard 2022 cover

Australian Building Codes Board

Version:  2022.  (Latest)
Provides a set of technical provisions that if complied with will enable dwellings to better meet the needs of the community, including older people and people with mobility limitations