Search all content

Current document versions only

1 - 10 of 19 results

AS/NZS ISO 22846.2:2020 Personal equipment for protection against falls - Rope access systems, Part 2: Code of practice 2020 cover

Name

AS/NZS ISO 22846.2:2020 Personal equipment for protection against falls - Rope access systems, Part 2: Code of practice

Publisher

Standards Australia/Standards New Zealand

Version: First Edition 2020. (Current)

This Standard adopts ISO 22846-2:2012, which provides recommendations and guidance on the use of rope access methods for work at height and expands on the fundamental principles given in AS/NZS ISO 22846.1, in conjunction with which it is intended to be used; intended for use by employers, employees and self-employed persons who use rope access methods, by those commissioning rope access work and by rope access associations.

6 results

found in this document show

Page 1

… Zealand Standard™ Personal equipment for protection against falls — Rope access systems Part 2: Code of practice …

Page 3

… Zealand Standard™ Personal equipment for protection against falls — Rope access systems Part 2: Code of practice Originated as AS/NZS 4488.2:1997. Jointly revised and redesignated as AS/NZS ISO …

Page 4

… Industrial rope access systems, Part 2: Selection, use and maintenance. The objective of this Standard is to provide recommendations and guidance on the use of rope access methods … 22846‑2:2012, Personal equipment for protection against falls — Rope access systems — Part 2: Code of practice. As this document has been reproduced from an International Standard, the following …

Page 7

… v Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards … falls — Rope access systems: — Part 1: Fundamental principles for a system of work — Part 2: Code of practice © Standards Australia Limited/Standards New Zealand 2020 …

Page 9

… ISO 22846.2:2020 Personal equipment for protection against falls — Rope access systems Part 2: Code of practice 1 Scope This part of ISO 22846 provides recommendations and guidance on the use of rope …

Page 36

… are in place prior to the work beginning; 4) pre-planned response methods, including methods of contacting required rescue services and methods of guiding rescue services to the correct … suspended access equipment, it is intended that reference be made to the appropriate codes of practice and standards. 7.5 7.5.1 Specific techniques commonly used in rope access …

AS/NZS 1547:2012 On-site domestic wastewater management 2012 cover

Name

AS/NZS 1547:2012 On-site domestic wastewater management

Publisher

Standards Australia/Standards New Zealand

Version: Second Edition 2012. (Current)

AS/NZS 1547:2012 provides the requirements for treatment units and their respective land application systems to achieve sustainable and effective on-site domestic wastewater management, to protect public health and the environment. This Standard identifies the performance statements that cover the overall design and sustainable management of on-site domestic wastewater systems.

2 results

found in this document show

Page 15

… 11 AS/NZS 1547:2012 EPA Victoria. Guidelines for environmental management: Use of reclaimed water. Victoria: EPA Victoria, 2003. McKenzie, N, Coughlan, K, and Cresswell, H. … impacts on ground water quality of on-site watershed management using alternative management practices. 1995. Retrieved from http://www.venhuizen-ww.com/ (November 2011). NEW ZEALAND … and regulations of the relevant authorities and, in New Zealand, with the New Zealand Building Code, and in Australia with the National Construction Code. While some legislation is …

Page 194

… AS/NZS 1547:2012 R3 190 REFERENCES/GUIDELINES USED IN THE DEVELOPMENT OF THESE SETBACK DISTANCES ANZECC and ARMCANZ. National water quality management strategy – … Council, 2004. Department of Local Government and Planning. Queensland plumbing and wastewater code. Queensland: Department of Local Government and Planning, 2006. Department of Local … Use of reclaimed water. Victoria: EPA Victoria, 2003. EPA Victoria. Septic tanks code of practice. Victoria: EPA Victoria, 2003. McLeod, M, Aislabie, J, Smith, J et al. ‘Viral and …

Apartment energy efficiency Handbook 2023 cover

Name

Apartment energy efficiency Handbook

Publisher

Australian Building Codes Board

Version: 2023. (Current)

Assists in understanding the energy efficiency provisions in NCC Volume One that apply to Class 2 apartment buildings.

Construction of buildings in flood hazard areas: ABCB Standard 2012 cover

Name

Construction of buildings in flood hazard areas: ABCB Standard

Publisher

Australian Building Codes Board

Version: 2012. (Current)

Specifies requirements for flood-resistant design and construction of buildings that are subject to the NCC requirements and that are located, in whole or in part, in flood hazard areas.

Condensation in buildings handbook 2023 cover

Name

Condensation in Buildings Handbook

Publisher

Australian Building Codes Board

Version: 2023. (Current)

Assists in understanding the condensation requirements in NCC 2022 Volumes One and Two.

3 results

found in this document show

Page 62

… spaces Lower temperatures in interstitial spaces around an insulated interior are one of the expected effects noted in Figure 4.4. In cooler spaces, RH will be higher and framing … resistance. This arrangement follows an example in the British Standard BS 5250:2011+A1:2016 "Code of practice for control of condensation in buildings" (Figure F.6). It relies on ventilation to …

Page 113

… Condensation in Buildings Handbook summaries below describe the scope of some of these standards and outline the nature of their content. British Standard (BS) 5250:2011+A1:2016 Code of practice for control of condensation in buildings This Standard is a code of practice providing …

Page 119

… F References and further reading • ABCB, Housing Provisions Standard: Australian Building Codes Board, 2022 • ABCB, National Construction Code Volume One. Canberra: Australian Building … Code, Volume Two. Canberra: Australian Building Codes Board, 2022. • ABCB, Scoping Study of Condensation in Residential Buildings: Final Report. Canberra: Australian Building Codes … Porirua, NZ • Building America, 2010 ‘Guide to Determining Climate Regions by County’. Best Practices Series, U.S. Department of Energy, vol. 7.1 • Consumer, Building and Occupational …

Indoor Air Quality Verification Methods Handbook 2016 cover

Name

Indoor Air Quality Verification Methods Handbook

Publisher

Australian Building Codes Board

Version: 2023. (Current)

Assists in understanding the indoor air quality (IAQ) Verification Methods in NCC Volumes One and Two (F6V1 and F6V2 in NCC Volume One and H4V3 of NCC Volume Two).

2 results

found in this document show

Page 94

… manufacturers with criteria and requirements for continually improving what products are made of and how they are made. The mark provides consumers, regulators, employees, and industry peers … Australia’s Environmental Certification Scheme for carpets, manufacturers must comply with the Code of Practice for Environmental Management which provides performance standards for raw materials, …

Page 112

… and Medical Research Council, (NHMRC 1996 rescinded 2002). • NCC 2022 Volume One Building Code of Australia Class 2 to 9 Buildings, Australian Building Codes Board, Canberra (ABCB 2022a). • … abcb.gov.au • • AIRAH airah.org.au • • Australian HVAC&R Industry application manuals and best practice guides. ASHRAE ashrae.org • • National Construction Code and related resources …

Name

NatHERS assessor handbook

Publisher

Australian Government

Version: 2019. (Current)

Explains how NatHERS assessments work and is an essential tool for NatHERS assessors.

2 results

found in this document show

Page 81

… a window with multiple glazing that includes both Group A and Group B components, it is good practice for assessors to identify the individual elements when naming the windows entered into NatHERS software. For example, if as assessor is splitting a window identified as W01 in the … window manufacturer has a glazed hinged door, assessors must use that custom window product code. Otherwise, it is entered as a Group A casement window with the appropriate default window …

Page 98

… NatHERS assessor handbook 8.8.1 Loss of insulation Ceiling penetrations, such as recessed light fittings, are modelled in the … have a diameter of approximately 300–350 mm. It is worth noting that the National Construction Code requires internal (ie. without a window or door) bathrooms, WCs and ensuites to have … mechanical ventilation. If an exhaust fan is not shown on the documentation, it would be best practice for assessors to check with the client and confirm whether an exhaust fan should be …

Name

AS 2865-2009 Confined spaces

Publisher

Standards Australia

Version: Third Edition 2009. (Pending Revision)

Sets out the requirements and risk control measures for ensuring the safety of those who must enter or carry out tasks associated with a confined space; contains sections dealing with planning and implementing entry to a confined space; appendices include guidance for training, risk assessment, atmospheric monitoring and sample forms and permits associated with confined space work.