Search all content

11 - 20 of 42 results
AS 5637.1:2015 Determination of fire hazard properties, Part 1: Wall and ceiling linings 2015 cover

Standards Australia

Version:  First Edition 2015.  (Current)
Sets out procedures for the assessment of internal wall and ceiling linings according to their tendency to ignite; their tendency to release heat once ignition has occurred; their tendency to cause flashover; their tendency to release smoke; and their contribution to fire growth.
AS 1735.11-1986 SAA Lift Code, Part 11: Fire-rated landing doors 1986 cover

Standards Australia

Version:  Third Edition 1986.  (Current)
Sets out requirements for fire-rated landing doors for retarding the passage of fire through openings in fire-rated liftwells; it applies where doors are required to have a fire-rating certificate.
AS 1530.1-1994 Methods for fire tests on building materials, components and structures, Part 1: Combustibility test for materials 1994 cover

Standards Australia

Version:  Third Edition 1994.  (Current)
Sets out a test method for determining the combustibility of building materials and is one of a series of test methods for evaluating the potential fire hazard of building products.
AS 1530.4:2014 Methods for fire tests on building materials, components and structures, Part 4: Fire-resistance tests for elements of construction 2014 cover

Standards Australia

Version:  Sixth Edition 2014.  (Current)
Sets out test procedures and criteria for the determination of fire-resistance of elements of building construction.
AS 3740:2021 Waterproofing of domestic wet areas 2021 cover

Standards Australia

Version:  Fifth Edition 2021.  (Current)
Sets out minimum requirements for the materials, design and installation of waterproofing for domestic wet areas in Class 1, Class 2 and Class 4 buildings as defined in the NCC. It also applies to wet areas within Class 3 to 9 buildings as if it were a Class 2 or 4 part of a building.
AS 1905.2-2005 Components for the protection of openings in fire-resistant walls, Part 2: Fire-resistant roller shutters 2005 cover

Standards Australia

Version:  Fourth Edition 2005.  (Current)
Specifies requirements for design, construction and installation of vertically operating roller shutters intended to protect trafficable openings in fire-rated walls; compliance is based on prototype testing in accordance with AS 1530.4; labelling requirements are included.
Whole-of-Home Efficiency Factors Standard 2022

Australian Building Codes Board

Version:  2022.  (Latest)
This ABCB Standard provides WOH efficiency factors for Class 1 dwellings, Class 2 sole-occupancy units and Class 4 parts of buildings in the energy efficiency provisions of the NCC; It applies in each NCC climate zone and jurisdiction.
Livable Housing Design Standard 2022 cover

Australian Building Codes Board

Version:  2022.  (Latest)
Provides a set of technical provisions that if complied with will enable dwellings to better meet the needs of the community, including older people and people with mobility limitations
Fire Safety Verification Method Standard 2022 cover

Australian Building Codes Board

Version:  2022.  (Latest)
Provides a process for engineering the design of fire safety Performance Solutions. The document provides the flexibility required to develop Performance Solutions while still maintaining the level of safety required by the NCC.