Search all content

11 - 20 of 41 results
AS/NZS 1530.3:1999 Methods for fire tests on building materials, components and structures, Part 3: Simultaneous determination of ignitability, flame propagation, heat release and smoke release 1999 cover

Standards Australia/Standards New Zealand

Version:  First Edition 1999.  (Current)
Describes a single test method for grading building materials on the basis of ignition tendency, flame spread, heat development and tendency to produce smoke.
Whole-of-Home Efficiency Factors Standard 2022

Australian Building Codes Board

Version:  2022.  (Latest)
This ABCB Standard provides WOH efficiency factors for Class 1 dwellings, Class 2 sole-occupancy units and Class 4 parts of buildings in the energy efficiency provisions of the NCC; It applies in each NCC climate zone and jurisdiction.
Livable Housing Design Standard 2022 cover

Australian Building Codes Board

Version:  2022.  (Latest)
Provides a set of technical provisions that if complied with will enable dwellings to better meet the needs of the community, including older people and people with mobility limitations
Fire Safety Verification Method Standard 2022 cover

Australian Building Codes Board

Version:  2022.  (Latest)
Provides a process for engineering the design of fire safety Performance Solutions. The document provides the flexibility required to develop Performance Solutions while still maintaining the level of safety required by the NCC.
AS/NZS ISO 717.1:2004 Acoustics - Rating of sound insulation in buildings and of building elements, Part 1: Airborne sound insulation 2004 cover

Standards Australia/Standards New Zealand

Version:  First Edition 2004.  (Pending Revision)
Provides a method whereby the frequency dependent values of airborne sound insulation of building elements and in building can be converted into a single number characterizing the acoustical performance; this Standard is identical with and reproduced from ISO 717-1:1996.
AS 2699.1:2020 Built-in components for masonry construction, Part 1: Wall ties 2020 cover

Standards Australia

Version:  First Edition 2020.  (Current)
This Standard specifies requirements for wall ties for use in tying together the leaves of cavity masonry walls, masonry veneer walls and loadbearing frames, and masonry veneer walls against a strong backing wall.
AS 3700:2018 Masonry Structures 2018 cover

Standards Australia

Version:  Fifth Edition 2018.  (Current)
Specifies minimum requirements for the design and construction of unreinforced, reinforced and prestressed masonry, including built-in components.
AS/NZS 2107:2016 Acoustics - Recommended design sound levels and reverberation times for building interiors 2016 cover

Standards Australia/Standards New Zealand

Version:  Second Edition 2016.  (Current)
Recommends design criteria for conditions affecting the acoustic environment within building interiors to ensure a healthy, comfortable and productive environment for the occupants and the users.
AS ISO 717.2-2004 Acoustics - Rating of sound insulation in buildings and of building elements, Part 2: Impact sound insulation 2004 cover

Standards Australia

Version:  First Edition 2004.  (Pending Revision)
Defines and provides methods for determining single number quantities for the impact sound insulation in buildings; this Standard is identical with and reproduced from ISO 717-2:1996.