Type
Publisher
Australian Building Codes Board
Publisher
Australian Building Codes Board
Version:
2022.
(Current)
Short Description
From 1 September 2025, only products conforming to the lead free provisions, where required, will be authorised for use in plumbing installations.
Type
Publisher
Australian Building Codes Board
Publisher
Australian Building Codes Board
Version:
2012.
(Current)
Short Description
Specifies requirements for flood-resistant design and construction of buildings that are subject to the NCC requirements and that are located, in whole or in part, in flood hazard areas.
Type
Publisher
Standards Australia
Publisher
Standards Australia
Version:
First Edition 2016.
(Current)
Short Description
Sets out the design methods, assumptions and other criteria, including uplift forces and racking pressures, suitable for the design of timber-framed buildings constructed within the limitations and parameters of, and using the building practice described in, AS 1684.2, AS 1684.3 and AS 1684.4.
Type
Publisher
Australian Building Codes Board
Publisher
Australian Building Codes Board
Version:
2023.
(Current)
Short Description
Assists in understanding cross-connection control and the requirements of NCC Volume Three, the Plumbing Code of Australia (PCA).
Type
Publisher
Standards Australia
Publisher
Standards Australia
Version:
Sixth Edition 2001.
(Current)
Short Description
Specifies the criteria for the selection of portable fire extinguishers and the requirements for their application, location and distribution.
Type
Publisher
Australian Building Codes Board
Publisher
Australian Building Codes Board
Version:
2023.
(Current)
Short Description
The following is a general representation and introduction to the DTS Provisions for thermal bridging in residential buildings.
Type
Publisher
Australian Building Codes Board
Publisher
Australian Building Codes Board
Version:
2023.
(Current)
Short Description
The Sound Transmission and Insulation in Buildings Handbook assists in understanding the sound transmission and insulation requirements in the NCC Volume One and Volume Two.
Type
Publisher
Standards Australia
Publisher
Standards Australia
Version:
Fourth Edition 2010.
(Pending Revision)
Short Description
Specifies requirements for the building industry with procedures that can be used to determine building practice, to design or check construction details, and to determine member sizes, and bracing and fixing requirements for timber-framed construction in non-cyclonic wind classifications N1 and N2. Also referred to as the timber framing code.
Type
Publisher
Australian Building Codes Board
Publisher
Australian Building Codes Board
Version:
2022.
(Latest)
Short Description
This ABCB Standard provides WOH efficiency factors for Class 1 dwellings, Class 2 sole-occupancy units and Class 4 parts of buildings in the energy efficiency provisions of the NCC; It applies in each NCC climate zone and jurisdiction.
Type
Publisher
Australian Building Codes Board
Publisher
Australian Building Codes Board
Version:
2022.
(Latest)
Short Description
Provides a set of technical provisions that if complied with will enable dwellings to better meet the needs of the community, including older people and people with mobility limitations