Search all content

1 - 10 of 81 results
AS 5637.1:2015 Determination of fire hazard properties, Part 1: Wall and ceiling linings 2015 cover

Standards Australia

Version:  First Edition 2015.  (Current)
Sets out procedures for the assessment of internal wall and ceiling linings according to their tendency to ignite; their tendency to release heat once ignition has occurred; their tendency to cause flashover; their tendency to release smoke; and their contribution to fire growth.
AS 1735.11-1986 SAA Lift Code, Part 11: Fire-rated landing doors 1986 cover

Standards Australia

Version:  Third Edition 1986.  (Current)
Sets out requirements for fire-rated landing doors for retarding the passage of fire through openings in fire-rated liftwells; it applies where doors are required to have a fire-rating certificate.
AS 1530.1-1994 Methods for fire tests on building materials, components and structures, Part 1: Combustibility test for materials 1994 cover

Standards Australia

Version:  Third Edition 1994.  (Current)
Sets out a test method for determining the combustibility of building materials and is one of a series of test methods for evaluating the potential fire hazard of building products.
AS 1530.4:2014 Methods for fire tests on building materials, components and structures, Part 4: Fire-resistance tests for elements of construction 2014 cover

Standards Australia

Version:  Sixth Edition 2014.  (Current)
Sets out test procedures and criteria for the determination of fire-resistance of elements of building construction.
AS/NZS 1530.3:1999 Methods for fire tests on building materials, components and structures, Part 3: Simultaneous determination of ignitability, flame propagation, heat release and smoke release 1999 cover

Standards Australia/Standards New Zealand

Version:  First Edition 1999.  (Current)
Describes a single test method for grading building materials on the basis of ignition tendency, flame spread, heat development and tendency to produce smoke.
AS 1905.2-2005 Components for the protection of openings in fire-resistant walls, Part 2: Fire-resistant roller shutters 2005 cover

Standards Australia

Version:  Fourth Edition 2005.  (Current)
Specifies requirements for design, construction and installation of vertically operating roller shutters intended to protect trafficable openings in fire-rated walls; compliance is based on prototype testing in accordance with AS 1530.4; labelling requirements are included.
Building permits and other exemptions BP-02 | Amending a building permit 2023 cover

Victorian Building Authority

Version:  2023.  (Current)
This Practice Note provides guidance for building surveyors for amending a building permit in compliance with the Building Act 1993 and the Building Regulations 2018.
Western Australia Guide to standards and tolerances 2019 2019 cover

Western Australia Government

Version:  2019.  (Current)
The Western Australia guide to standards and tolerances 2019 (the Guide) has been developed for use by builders and building owners as a convenient reference for acceptable standards of workmanship in residential building construction; it is intended to address areas that are not prescribed under legislation or under a home building contract.
AS/NZS 3837:1998 Method of test for heat and smoke release rates for materials and products using an oxygen consumption calorimeter 1998 cover

Standards Australia/Standards New Zealand

Version:  First Edition 1998.  (Current)
Sets out a test method for the determination of ignitability, heat release rates, mass loss rates, effective heat of combustion and smoke release of materials and products when exposed to controlled levels of radiant heating.