Search all content

1 - 10 of 36 results
Apartment energy efficiency Handbook 2023 cover

Australian Building Codes Board

Version:  2023.  (Current)
Assists in understanding the energy efficiency provisions in NCC Volume One that apply to Class 2 apartment buildings.
Construction of buildings in flood hazard areas: ABCB Standard 2012 cover

Australian Building Codes Board

Version:  2012.  (Current)
Specifies requirements for flood-resistant design and construction of buildings that are subject to the NCC requirements and that are located, in whole or in part, in flood hazard areas.
AS 5637.1:2015 Determination of fire hazard properties, Part 1: Wall and ceiling linings 2015 cover

Standards Australia

Version:  First Edition 2015.  (Current)
Sets out procedures for the assessment of internal wall and ceiling linings according to their tendency to ignite; their tendency to release heat once ignition has occurred; their tendency to cause flashover; their tendency to release smoke; and their contribution to fire growth.
AS 1735.11-1986 SAA Lift Code, Part 11: Fire-rated landing doors 1986 cover

Standards Australia

Version:  Third Edition 1986.  (Current)
Sets out requirements for fire-rated landing doors for retarding the passage of fire through openings in fire-rated liftwells; it applies where doors are required to have a fire-rating certificate.
AS 1530.1-1994 Methods for fire tests on building materials, components and structures, Part 1: Combustibility test for materials 1994 cover

Standards Australia

Version:  Third Edition 1994.  (Current)
Sets out a test method for determining the combustibility of building materials and is one of a series of test methods for evaluating the potential fire hazard of building products.
AS 1530.4:2014 Methods for fire tests on building materials, components and structures, Part 4: Fire-resistance tests for elements of construction 2014 cover

Standards Australia

Version:  Sixth Edition 2014.  (Current)
Sets out test procedures and criteria for the determination of fire-resistance of elements of building construction.
AS 1905.2-2005 Components for the protection of openings in fire-resistant walls, Part 2: Fire-resistant roller shutters 2005 cover

Standards Australia

Version:  Fourth Edition 2005.  (Current)
Specifies requirements for design, construction and installation of vertically operating roller shutters intended to protect trafficable openings in fire-rated walls; compliance is based on prototype testing in accordance with AS 1530.4; labelling requirements are included.
AS/NZS 1530.3:1999 Methods for fire tests on building materials, components and structures, Part 3: Simultaneous determination of ignitability, flame propagation, heat release and smoke release 1999 cover

Standards Australia/Standards New Zealand

Version:  First Edition 1999.  (Current)
Describes a single test method for grading building materials on the basis of ignition tendency, flame spread, heat development and tendency to produce smoke.
Condensation in buildings handbook 2023 cover

Australian Building Codes Board

Version:  2023.  (Current)
Assists in understanding the condensation requirements in NCC 2022 Volumes One and Two.