Search all content

Current document versions only

1 - 10 of 18 results

AS/NZS 1547:2012 On-site domestic wastewater management 2012 cover

Name

AS/NZS 1547:2012 On-site domestic wastewater management

Publisher

Standards Australia/Standards New Zealand

Version: Second Edition 2012. (Current)

AS/NZS 1547:2012 provides the requirements for treatment units and their respective land application systems to achieve sustainable and effective on-site domestic wastewater management, to protect public health and the environment. This Standard identifies the performance statements that cover the overall design and sustainable management of on-site domestic wastewater systems.

2 results

found in this document show

Page 15

… 11 AS/NZS 1547:2012 EPA Victoria. Guidelines for environmental management: Use of reclaimed water. Victoria: EPA Victoria, 2003. McKenzie, N, Coughlan, K, and Cresswell, H. … impacts on ground water quality of on-site watershed management using alternative management practices. 1995. Retrieved from http://www.venhuizen-ww.com/ (November 2011). NEW ZEALAND … and regulations of the relevant authorities and, in New Zealand, with the New Zealand Building Code, and in Australia with the National Construction Code. While some legislation is …

Page 194

… AS/NZS 1547:2012 R3 190 REFERENCES/GUIDELINES USED IN THE DEVELOPMENT OF THESE SETBACK DISTANCES ANZECC and ARMCANZ. National water quality management strategy – … Council, 2004. Department of Local Government and Planning. Queensland plumbing and wastewater code. Queensland: Department of Local Government and Planning, 2006. Department of Local … Use of reclaimed water. Victoria: EPA Victoria, 2003. EPA Victoria. Septic tanks code of practice. Victoria: EPA Victoria, 2003. McLeod, M, Aislabie, J, Smith, J et al. ‘Viral and …

Apartment energy efficiency Handbook 2023 cover

Name

Apartment energy efficiency Handbook

Publisher

Australian Building Codes Board

Version: 2023. (Current)

Assists in understanding the energy efficiency provisions in NCC Volume One that apply to Class 2 apartment buildings.

Construction of buildings in flood hazard areas: ABCB Standard 2012 cover

Name

Construction of buildings in flood hazard areas: ABCB Standard

Publisher

Australian Building Codes Board

Version: 2012. (Current)

Specifies requirements for flood-resistant design and construction of buildings that are subject to the NCC requirements and that are located, in whole or in part, in flood hazard areas.

Condensation in buildings handbook 2023 cover

Name

Condensation in Buildings Handbook

Publisher

Australian Building Codes Board

Version: 2023. (Current)

Assists in understanding the condensation requirements in NCC 2022 Volumes One and Two.

3 results

found in this document show

Page 62

… spaces Lower temperatures in interstitial spaces around an insulated interior are one of the expected effects noted in Figure 4.4. In cooler spaces, RH will be higher and framing … resistance. This arrangement follows an example in the British Standard BS 5250:2011+A1:2016 "Code of practice for control of condensation in buildings" (Figure F.6). It relies on ventilation to …

Page 113

… Condensation in Buildings Handbook summaries below describe the scope of some of these standards and outline the nature of their content. British Standard (BS) 5250:2011+A1:2016 Code of practice for control of condensation in buildings This Standard is a code of practice providing …

Page 119

… F References and further reading • ABCB, Housing Provisions Standard: Australian Building Codes Board, 2022 • ABCB, National Construction Code Volume One. Canberra: Australian Building … Code, Volume Two. Canberra: Australian Building Codes Board, 2022. • ABCB, Scoping Study of Condensation in Residential Buildings: Final Report. Canberra: Australian Building Codes … Porirua, NZ • Building America, 2010 ‘Guide to Determining Climate Regions by County’. Best Practices Series, U.S. Department of Energy, vol. 7.1 • Consumer, Building and Occupational …

AS/NZS 5139:2019 Electrical installations - Safety of battery systems for use with power conversion equipment 2019 cover

Name

AS/NZS 5139:2019 Electrical installations - Safety of battery systems for use with power conversion equipment

Publisher

Standards Australia/Standards New Zealand

Version: First Edition 2019. (Current)

Specifies requirements for general installation and safety requirements for battery energy storage systems (BESSs), where the battery system is installed in a location, such as a dedicated enclosure or room, and is connected with power conversion equipment (PCE) to supply electric power to other parts of an electrical installation.

2 results

found in this document show

Page 10

… AS/NZS 5139:2019 2 NOTE 1 While this Standard applies to systems of up to 200 kWh, the general requirements of this Standard may apply to larger installations. … storage systems (BESSs) — in Section 4. (c) Battery systems and BESSs not conforming to Best Practice Guide: battery storage equipment — Electrical Safety Requirements — in Section 6. (b) … in conjunction with the AS/NZS 4509 series. Local government, Australian National Construction Code (NCC) and New Zealand Building Code requirements for buildings may also apply where a BESS …

Page 11

… the Australian/New Zealand Wiring Rules) AS/NZS 3008.1.1, Electrical installations — Selection of cables, Part 1.1: Cables for alternating voltages up to and including 0.6/1 kV — Typical … systems of fuses A to F IEC 60529, Degrees of protection provided by enclosures (IP Code) IEC 60896, Stationary lead-acid batteries (series) IEC 62109‑1, Safety of power converters … rating of 1,5 kV DC NZS 4219, Seismic performance of engineering systems in buildings Best Practice Guide: battery storage equipment — Electrical Safety Requirements, V 1.0 (2018)1) 1) …

Indoor Air Quality Verification Methods Handbook 2016 cover

Name

Indoor Air Quality Verification Methods Handbook

Publisher

Australian Building Codes Board

Version: 2023. (Current)

Assists in understanding the indoor air quality (IAQ) Verification Methods in NCC Volumes One and Two (F6V1 and F6V2 in NCC Volume One and H4V3 of NCC Volume Two).

2 results

found in this document show

Page 94

… manufacturers with criteria and requirements for continually improving what products are made of and how they are made. The mark provides consumers, regulators, employees, and industry peers … Australia’s Environmental Certification Scheme for carpets, manufacturers must comply with the Code of Practice for Environmental Management which provides performance standards for raw materials, …

Page 112

… and Medical Research Council, (NHMRC 1996 rescinded 2002). • NCC 2022 Volume One Building Code of Australia Class 2 to 9 Buildings, Australian Building Codes Board, Canberra (ABCB 2022a). • … abcb.gov.au • • AIRAH airah.org.au • • Australian HVAC&R Industry application manuals and best practice guides. ASHRAE ashrae.org • • National Construction Code and related resources …

AS/NZS 3000:2018 Electrical installations (known as the Australian/New Zealand Wiring Rules) 2018 cover

Name

AS/NZS 3000:2018 Electrical installations (known as the Australian/New Zealand Wiring Rules)

Publisher

Standards Australia/Standards New Zealand

Version: Third Edition 2018. (Current)

AS NZS 3000 2018 (known as the Australian/New Zealand Wiring Rules) specifies requirements for the design, construction and verification of electrical installations, including the selection and installation of electrical equipment forming part of such electrical installations; part 1 provides provisions that constitute the minimum regulatory requirements for a safe electrical installation; part 2 provides work methods and installation practices that are ‘deemed to comply’ with the requirements of Part 1.

3 results

found in this document show

Page 174

… 171 (b) Where a suitable screen of a multi-core cable is used as a protective earthing conductor, it shall be acceptable to … to current and superseded Australian and New Zealand Standards and typical European practices. Figures 3.2 demonstrates the coordination of conductor insulation colours of … be exercised when connecting imported equipment that does not use AS/NZS conductor colour codes. Detailed testing should be performed to verify the function and connection of wiring …

Page 314

… is used the following conditions shall apply: (i) The terminal shall be connected by means of a protective earthing conductor to the main earthing conductor of the electrical installation … (Wiring Rules). 2 Recommendations for New Zealand are contained in the TCF Premises NZ Wiring Code of Practice . 3 Refer to Appendix F for further detail of the bonding arrangement. 5.6.3 Bonding …

Page 441

… Forum (TCF) Premises Wiring Guidelines Worksafe New Zealand NZECP 55 New Zealand Electrical Code of Practice for Managing Electrical Risks Associated with Electrically Conductive Thermal …

Name

NatHERS assessor handbook

Publisher

Australian Government

Version: 2019. (Current)

Explains how NatHERS assessments work and is an essential tool for NatHERS assessors.

2 results

found in this document show

Page 81

… a window with multiple glazing that includes both Group A and Group B components, it is good practice for assessors to identify the individual elements when naming the windows entered into NatHERS software. For example, if as assessor is splitting a window identified as W01 in the … window manufacturer has a glazed hinged door, assessors must use that custom window product code. Otherwise, it is entered as a Group A casement window with the appropriate default window …

Page 98

… NatHERS assessor handbook 8.8.1 Loss of insulation Ceiling penetrations, such as recessed light fittings, are modelled in the … have a diameter of approximately 300–350 mm. It is worth noting that the National Construction Code requires internal (ie. without a window or door) bathrooms, WCs and ensuites to have … mechanical ventilation. If an exhaust fan is not shown on the documentation, it would be best practice for assessors to check with the client and confirm whether an exhaust fan should be …

An Exploration Of Factors Influencing Quality Management System (Qms) Implementation: The Case Of The Australian Construction Industry 2020 cover

Name

An Exploration Of Factors Influencing Quality Management System (Qms) Implementation: The Case Of The Australian Construction Industry

Version: 2020. (Current)

This research primarily aims to investigate an inclusive list of factors impacting on quality management system deployment in the construction industry building sector by focusing exclusively on the external factors and the critical success factors of project level in order to develop a comprehensive framework of quality management system deployment.

1 results

found in this document show

Page 190

… Government policies All respondents referred to the impact of government policies on the process of QMS execution. PB2 stated that: "Government policies … that vary, or have a state-based bias across different locations; examples of this would be the Codes of Practice which have state-based requirements. As an example, in the Case Study 2 project, …

AS 1530.8.1:2018 Methods for fire tests on building materials, components and structures, Part 8.1: Tests on elements of construction for buildings exposed to simulated bushfire attack - Radiant heat and small flaming sources 2018 cover

Name

AS 1530.8.1:2018 Methods for fire tests on building materials, components and structures, Part 8.1: Tests on elements of construction for buildings exposed to simulated bushfire attack - Radiant heat and small flaming sources

Publisher

Standards Australia

Version: Second Edition 2018. (Current)

This Standard provides methods for determining the performance of external construction elements when exposed to radiant heat, burning embers and burning debris.

1 results

found in this document show

Page 9

… For most applications (excluding some glazed elements such as toughened glass) these proposed profiles would be expected to be conservative when applied to buildings within the scope of AS … rates for materials and products using an oxygen consumption calorimeter ASTM D2898 Standard practice for accelerated weathering of fire-retardant-treated wood for fire testing ABCB National Construction Code 7 DEFINITIONS For the purposes of this Standard, the following definitions apply. 7.1 …

Search all content

Type

Sector

Publishers

Collection

State

Name

AS/NZS 1547:2012 On-site domestic wastewater management

Publisher

Standards Australia/Standards New Zealand

2 results

Name

Apartment energy efficiency Handbook

Publisher

Australian Building Codes Board

Name

Construction of buildings in flood hazard areas: ABCB Standard

Publisher

Australian Building Codes Board

Name

Condensation in Buildings Handbook

Publisher

Australian Building Codes Board

3 results

Name

AS/NZS 5139:2019 Electrical installations - Safety of battery systems for use with power conversion equipment

Publisher

Standards Australia/Standards New Zealand

2 results

Name

Indoor Air Quality Verification Methods Handbook

Publisher

Australian Building Codes Board

2 results

Name

AS/NZS 3000:2018 Electrical installations (known as the Australian/New Zealand Wiring Rules)

Publisher

Standards Australia/Standards New Zealand

3 results

Name

NatHERS assessor handbook

Publisher

Australian Government

2 results

Name

An Exploration Of Factors Influencing Quality Management System (Qms) Implementation: The Case Of The Australian Construction Industry

1 results

Name

AS 1530.8.1:2018 Methods for fire tests on building materials, components and structures, Part 8.1: Tests on elements of construction for buildings exposed to simulated bushfire attack - Radiant heat and small flaming sources

Publisher

Standards Australia

1 results

Search all content

Name AS/NZS 1547:2012 On-site domestic wastewater management

Publisher Standards Australia/Standards New Zealand

2 results

Name Apartment energy efficiency Handbook

Publisher Australian Building Codes Board

Name Construction of buildings in flood hazard areas: ABCB Standard

Publisher Australian Building Codes Board

Name Condensation in Buildings Handbook

Publisher Australian Building Codes Board

3 results

Name AS/NZS 5139:2019 Electrical installations - Safety of battery systems for use with power conversion equipment

Publisher Standards Australia/Standards New Zealand

2 results

Name Indoor Air Quality Verification Methods Handbook

Publisher Australian Building Codes Board

2 results

Name AS/NZS 3000:2018 Electrical installations (known as the Australian/New Zealand Wiring Rules)

Publisher Standards Australia/Standards New Zealand

3 results

Name NatHERS assessor handbook

Publisher Australian Government

2 results

Name An Exploration Of Factors Influencing Quality Management System (Qms) Implementation: The Case Of The Australian Construction Industry

1 results

Name AS 1530.8.1:2018 Methods for fire tests on building materials, components and structures, Part 8.1: Tests on elements of construction for buildings exposed to simulated bushfire attack - Radiant heat and small flaming sources

Publisher Standards Australia

1 results

Name

AS/NZS 1547:2012 On-site domestic wastewater management

Publisher

Standards Australia/Standards New Zealand

Name

Apartment energy efficiency Handbook

Publisher

Australian Building Codes Board

Name

Construction of buildings in flood hazard areas: ABCB Standard

Publisher

Australian Building Codes Board

Name

Condensation in Buildings Handbook

Publisher

Australian Building Codes Board

Name

AS/NZS 5139:2019 Electrical installations - Safety of battery systems for use with power conversion equipment

Publisher

Standards Australia/Standards New Zealand

Name

Indoor Air Quality Verification Methods Handbook

Publisher

Australian Building Codes Board

Name

AS/NZS 3000:2018 Electrical installations (known as the Australian/New Zealand Wiring Rules)

Publisher

Standards Australia/Standards New Zealand

Name

NatHERS assessor handbook

Publisher

Australian Government

Name

An Exploration Of Factors Influencing Quality Management System (Qms) Implementation: The Case Of The Australian Construction Industry

Name

AS 1530.8.1:2018 Methods for fire tests on building materials, components and structures, Part 8.1: Tests on elements of construction for buildings exposed to simulated bushfire attack - Radiant heat and small flaming sources

Publisher

Standards Australia