NCC Historical Standards

These are the NCC Primary References Historical editions, Supplements, and Amendments

The NCC Primary References Plus Set includes standards in the NCC Primary References Set, plus the Historical editions, Supplements, and Amendments.

The NCC Primary References Plus Set also includes the Historical Timber Framing Span Tables - Wind Classification Supplements.

Name	Publisher
AS 1170.4-1993 Minimum design loads on structures (known as the SAA Loading Code), Part 4: Earthquake loads	Available Superseded Standards Australia	Sets out data and procedures for determining minimum earthquake loads on structures and their components, and also minimum detailing requirements for structures. It does not consider related phenomena such as settlement, slides, subsidence, liquefaction or faulting in the immediate vicinity of a structure. It does not include nuclear reactors, dams, transmission towers, bridges, piers and wharves, which may require special consideration. The Standard is in limit states format. New earthquake maps are defined in terms of an acceleration coefficient instead of the zoning system used in the previous Standard AS 2121. Domestic structures are now included.
AS 1668.2-2002 The use of ventilation and airconditioning in buildings, Part 2: Ventilation design for indoor air contaminant control	Available Superseded Standards Australia	Specifies design requirements for natural ventilation systems and mechanical air-handling systems that ventilate enclosures, and sets minimum requirements for the ventilation of enslosures.
AS 1926.1-1993 Swimming pool safety, Part 1: Fencing for swimming pools	Available Superseded Standards Australia	Specifies design, construction and performance requirements for child-resistant fences and gates intended primarily for use in preventing access to swimming pools by young children.
AS/NZS 3000:2018 Amd 1:2020 Electrical installations (known as the Australian/New Zealand Wiring Rules)	Current Standards Australia/Standards New Zealand	2018 edition of AS/NZS 3000 is amended as follows.
AS/NZS 1170.2:2011 AMDT 1 Structural design actions, Part 2: Wind actions	Superseded Standards Australia/Standards New Zealand	The 2011 edition of AS/NZS 1170.2 is amended as follows.
AS/NZS 1170.2:2011 AMDT 2 Structural design actions, Part 2: Wind actions	Superseded Standards Australia/Standards New Zealand	Amends AS/NZS 1170.2:2011.
AS/NZS 1170.2:2011 AMDT 3 Structural design actions, Part 2: Wind actions	Superseded Standards Australia/Standards New Zealand	Amends AS/NZS 1170.2:2011.
AS/NZS 1170.2:2011 Amd 4:2016 Structural design actions, Part 2: Wind actions	Superseded Standards Australia/Standards New Zealand	Amends AS/NZS 1170.2:2011.
AS 2870.1-1988 Residential slabs and footings, Part 1: Construction	Superseded Standards Australia	Sets out the requirements for the classification of a site and the design and construction of a footing system for a single dwelling house, town house or the like which may be detached or separated by a party wall or common wall but not situated vertically above or below another dwelling. The Standard may also apply to other forms of construction including some light commercial and institutional buildings if they are similar to houses in size, loading and superstructure flexibility. The footing systems for which designs are given include slab-on-ground, stiffened rafts, waffle rafts, strip footings and pad footings. The designs in This Standard do not apply to industrial buildings.
AS/NZS 3000:2018 Amd 2:2021 Electrical installations (known as the Australian/New Zealand Wiring Rules)	Current Standards Australia/Standards New Zealand	2018 edition of AS/NZS 3000 is amended as follows.
AS 3660.1:2014 Termite management, Part 1: New building work	Current Standards Australia	Sets out requirements for the design and construction of subterranean termite management systems for new buildings and new building work.
AS/NZS 3000:2018 Electrical installations (known as the Australian/New Zealand Wiring Rules)	Current Standards Australia/Standards New Zealand	AS NZS 3000 2018 (known as the Australian/New Zealand Wiring Rules) specifies requirements for the design, construction and verification of electrical installations, including the selection and installation of electrical equipment forming part of such electrical installations; part 1 provides provisions that constitute the minimum regulatory requirements for a safe electrical installation; part 2 provides work methods and installation practices that are ‘deemed to comply’ with the requirements of Part 1.
AS 1428.4-1992 Design for access and mobility, Part 4: Tactile ground surface indicators for the orientation of people with vision impairment	Available Superseded Standards Australia	Sets out requirements for the design and installation of tactile ground surface indicators to assist people with vision impairment. Specific types of ground surface indicators that warn of hazards and denote direction are provided.
AS/NZS 1170.2:2021 Amd 1:2023 Structural design actions, Part 2: Wind actions	Current Standards Australia/Standards New Zealand
AS/NZS 1170.2:2021 Structural design actions, Part 2: Wind actions	Current Standards Australia/Standards New Zealand	Sets out procedures for determining wind speeds and resulting wind actions to be used in the structural design of structures subjected to wind actions other than those caused by tornadoes; to be read in conjunction with AS/NZS 1170.0.
AS 1428.1-2001 Design for access and mobility, Part 1: General requirements for access - New building work	Available Superseded Standards Australia	Specifies design requirements applicable to new building work, including public and commercial, to provide access for people with disabilities.
AS 4254.1:2021 Ductwork for air-handling systems in buildings, Part 1: Flexible duct	Current Standards Australia	Provides standardized requirements for the performance testing, manufacture and installation of flexible ducts.
AS 1670.1-1995 Fire detection, warning, control and intercom systems - System design, installation and commissioning, Part 1: Fire	Superseded Standards Australia	Specifies the design, installation and commissioning of automatic fire detection and alarm systems. Provides the user with in-depth information on distributed systems, revised spacing parameters, revised and expanded installation requirements and revised drawings utilizing the ISO based symbols.
AS 1684.2-2006 Residential timber-framed construction, Part 2: Non-cyclonic areas	Superseded Standards Australia	Specifies requirements for building practice and for the selection, placement and fixing of the various structural elements used in the construction of timber-framed Class 1 and Class 10 buildings, as defined in the Building Code of Australia, for non-cyclonic areas.
AS/NZS 1596:2014 Amd 1:2017 The storage and handling of LP Gas	Current Standards Australia/Standards New Zealand	The 2014 edition of AS/NZS 1596 is amended as follows.
AS/NZS 1596:2014 Amd 2:2020 The storage and handling of LP Gas	Current Standards Australia/Standards New Zealand	The 2014 edition of AS/NZS 1596 is amended as follows.
AS 2118.6-2012 Automatic fire sprinkler systems, Part 6: Combined sprinkler and hydrant systems in multistorey buildings	Pending Revision Standards Australia	Sets out minimum criteria for the design, installation and commissioning of combined sprinkler and hydrant systems (including fire hose reels where appropriate) in multistorey buildings greater than two storeys in height.
AS 2047-2014 Windows and external glazed doors in buildings	Current Standards Australia	Sets out requirements for materials, construction, installation and glazing for external windows, sliding and swinging glazed doors, including French and bi-fold doors, adjustable louvres, shopfronts and window walls with one-piece framing elements.
AS 1668.2-2012 The use of ventilation and airconditioning in buildings, Part 2: Mechanical ventilation in buildings	Pending Revision Standards Australia	AS 1668.2 2012 sets out requirements for mechanical air-handling systems that ventilate buildings and car parks, and for ventilation based on the need to control odours, particulates and specific gases. Also known as AS 1668 part 2.
AS 1926.1-2012 Swimming pool safety, Part 1: Safety barriers for swimming pools	Pending Revision Standards Australia	Specifies requirements for the design, construction and performance of barriers that will restrict the access of young children to swimming pools.
AS 1657:2018 Fixed platforms, walkways, stairways and ladders - Design, construction and installation	Current Standards Australia	Sets out requirements for the design, selection, construction and installation of fixed platforms, walkways, stairways and ladders that are intended to provide safe access to places used by operating, inspection, maintenance and servicing personnel.
AS 1428.1-2009 Design for access and mobility, Part 1: General requirements for access - New building work	Available Superseded Standards Australia	AS 1428.1 2009 Sets out minimum design requirements for new building work, as required by the Building Code of Australia (BCA), to enable access for people with disabilities.
AS 4254.2-2012 Ductwork for air-handling systems in buildings, Part 2: Rigid duct	Pending Revision Standards Australia	Sets out requirements for materials, construction, and installation, including some aspects of performance, for ductwork for air-handling systems in buildings and facilities, including systems designed in accordance with requirements of AS/NZS 1668.1 and AS 1668.2.
AS 2118.4-2012 Automatic fire sprinkler systems, Part 4: Sprinkler protection for accommodation buildings not exceeding four storeys in height	Pending Revision Standards Australia	Specifies requirements for the design, installation and acceptance testing (commissioning) of automatic fire sprinkler systems in accommodation buildings not more than four storeys.
AS 4055:2021 Wind loads for housing	Current Standards Australia	Specifies site wind speed classes for determining design wind speeds and wind loads for NCC Class 1 and 10 buildings within the geometric limits given in Clause 1.2; the classes are for use in the design of housing and for design, manufacturing and specifying of building products and systems used for housing.
AS/NZS 3500.4:2021 Plumbing and drainage, Part 4: Heated water services	Current Standards Australia/Standards New Zealand	Sets out the requirements for the design, installation and commissioning of heated water services using drinking water or rainwater or a combination thereof; includes aspects of the installation from, and including, the valve(s) on the cold water inlet to any cold water storage tank or water heater and the downstream fixtures and fittings; applies to new installations as well as alterations, additions and repairs to existing installations.
AS 1668.1:2015 The use of ventilation and air conditioning in buildings, Part 1: Fire and smoke control in buildings	Current Standards Australia	Sets out minimum requirements for the design, construction, installation and commissioning of mechanical smoke control systems in buildings; specific methods of smoke control are defined and the appropriate requirements specified for each.
AS/NZS 4859.1:2018 Thermal insulation materials for buildings, Part 1: General criteria and technical provisions	Current Standards Australia/Standards New Zealand	Provides requirements and test methods for materials that are used for thermal insulation within buildings, including thermal insulation of ductwork and pipework, by moderating the flow of heat through these elements.
AS/NZS 1680.2.2:2008 Interior and workplace lighting, Part 2.2: Specific applications - Office and screen-based tasks	Pending Revision Standards Australia/Standards New Zealand	Sets out recommendations for the lighting of offices and similar tasks, including screen-based tasks. While the tasks may be commonly performed in interiors called offices’, they may also be performed in other interiors; for example, reading, writing and screen-based tasks frequently occur in most types of interior workplaces.
AS/NZS 1680.2.4:2017 Interior and workplace lighting, Part 2.4: Industrial tasks and processes	Current Standards Australia/Standards New Zealand	Sets out recommendations for the lighting of industrial tasks and processes that are carried out within buildings.
AS/NZS 3002:2008 Electrical installations - Shows and carnivals	Available Superseded Standards Australia/Standards New Zealand	Sets out requirements for the supply of electricity at low-voltage by wiring distribution systems to power consuming devices used for accommodation, entertainment or display purposes within concessions, tents, living quarters and other structures, associated with events with a maximum duration of four weeks.
AS 1668.2-1991 The use of mechanical ventilation and air-conditioning in buildings, Part 2: Mechanical ventilation for acceptable indoor-air quality	Available Superseded Standards Australia	Sets out the requirements for air handling systems which ventilate enclosures by mechanical means. It sets minimum requirements for preventing an excess accumulation of airborne contaminants, or objectionable odours. It does not prescribe other requirements associated with comfort such as temperature, humidity, air movement or noise. The Standard also includes requirements for natural ventilation at carparks. Road tunnels are not addressed in this Standard.
AS/NZS 1680.2.5:2018 Interior and workplace lighting, Part 2.5: Hospital and medical tasks	Current Standards Australia/Standards New Zealand	Sets out lighting recommendations for a variety of tasks carried out within hospitals and medical premises, particularly tasks associated with clinical observation, treatment and care; recommendations also apply to related tasks, such as the visual examination of biological solutions and pathology specimens, in medical laboratories.
AS 5010-2001 Hygienic production of ratite (emu/ostrich) meat for human consumption	Current Standards Australia	Sets out requirements for the hygienic production of ratite (emu/ostrich) meat for human consumption.
AS 4465-2006 Construction of premises and hygienic production of poultry meat for human consumption	Current Standards Australia	Written in compliance and consistency with Codex Alimentarius Volume 10.
AS 4696-2007 Hygienic production and transportation of meat and meat products for human consumption	Available Superseded Standards Australia	Sets out requirements for hygienic production and transportation of meat and meat products for human consumption that are derived from animals of the bovine, bubaline, camelidae, caprine, cervidae, ovine, porcine and soliped species slaughtered other than in wild state.
AS 1603.3:2018 Automatic fire detection and alarm systems, Part 3: Heat alarms	Current Standards Australia	Specifies requirements, test methods and functional criteria for heat alarms that operate using scattered light, transmitted light or ionization, intended for household or similar residential applications.
AS 2001.5.4-2005 Methods of test for textiles, Method 5.4: Dimensional change - Domestic washing and drying procedures for textile testing (ISO 6330:2000, MOD)	Current Standards Australia	Specifies domestic washing and drying procedures for textile testing; procedures are applicable to textile fabrics, garments or other textile articles which are subjected to appropriate combinations of domestic washing and drying procedures.
AS/NZS 1680.2.3:2008 Interior and workplace lighting, Part 2.3: Specific applications - Educational and training facilities	Pending Revision Standards Australia/Standards New Zealand	Sets out recommendations for the creation of good seeing conditions in educational and training facilities by means of appropriate lighting and interior colour treatment.
AS 4464-2007 Hygienic production of wild game meat for human consumption	Current Standards Australia	Sets out requirements for hygienic production and transportation of wild game meat for human consumption. This Standard was developed by the Meat Standards Committee (MSC) of the Food Regulation Standing Committee (FRSC) under the Australian and New Zealand Food Regulation Ministerial Council (ANZFRMC). It is also known as FRSC Technical Report No. 2 which was published as AS 4464-2007 by CSIRO PUBLISHING.
AS 5008-2007 Hygienic rendering of animal products	Pending Revision Standards Australia	Provides minimum requirements for construction, equipment and rendering operations prescribed in this Standard.
AS 4674-2004 Design, construction and fit-out of food premises	Pending Revision Standards Australia	Provides criteria for architects, the construction industry and health and building regulators to cooperatively ensure that buildings used by food businesses are designed, constructed and fitted out in compliance with the requirements of the Australian Food Standards Code, Standard 3.2.3, Food Premises and Equipment, which will assist food businesses to produce safe food.
AS 2746-2008 Working areas for gas-fuelled vehicles	Withdrawn Standards Australia	Sets out workshop safety requirements for dealing with Liquefied Natural Gas (LNG) fuelled engines and LNG fuel unloading methods, and requirements for CNG and LP Gas fuelled vehicles.
AS/NZS 1891.4:2000 Industrial fall-arrest systems and devices, Part 4: Selection, use and maintenance	Available Superseded Standards Australia/Standards New Zealand	Specifies requirements and sets out recommendations for the selection, safe use and maintenance of industrial fall-arrest systems and devices based on the use of safety harnesses (including belts), horizontal life lines and rails, fall-arrest devices, and associated lanyards, connectors, anchorages and fittings.
AS/NZS 1680.2.1:2008 Interior and workplace lighting, Part 2.1: Specific applications - Circulation spaces and other general areas	Pending Revision Standards Australia/Standards New Zealand	Sets out recommendations for the lighting of circulation spaces and other areas which commonly occur in buildings of various types; contains material that adds to or amends the recommendations in AS/NZS 1680.1:2006 and is intended to be read in conjunction with that Standard and with any applicable specific recommendations in other Standards in the AS/NZS 1680 series.
AS/NZS 1596:2014 The storage and handling of LP Gas	Current Standards Australia/Standards New Zealand	Sets out requirements and recommendations for the safe storage and handling of LP Gas, in cylinders and bulk tanks.
AS/NZS 1260:2017 PVC-U pipes and fittings for drain, waste and vent applications	Current Standards Australia/Standards New Zealand	Specifies requirements for PVC-U pipes and fittings for sewer, drain, waste and vent applications above ground or below ground and is intended to be used where the pipeline is operating under gravity flow and the operating pressure is low; includes requirements for both plain and structured wall pipes and fittings.
AS/NZS 1680.1:2006 Interior and workplace lighting, Part 1: General principles and recommendations	Pending Revision Standards Australia/Standards New Zealand	Provides general principles and recommendations for the lighting of building interiors to enhance the performance and comfort of those performing visual tasks; deals with illuminating essential task details, using both artificial light and daylight, while controlling or excluding factors that might cause visual discomfort.
AS 5011-2001 Hygienic production of natural casings for human consumption	Current Standards Australia	Sets out requirements for the hygienic production of natural casings for human consumption. This Standard was developed by a technical subcommittee of the Standing Committee on Agriculture and Resource Management (SCARM) under the Agriculture and Resource Management Council of Australia and New Zealand (ARMCANZ).
AS 2658-2008 AMDT 2 LP Gas - Portable and mobile appliances	Superseded Standards Australia	The 2008 edition of AS 2658 is amended as follows.
AS 2658-2008 AMDT 3 LP Gas - Portable and mobile appliances	Superseded Standards Australia	The 2008 edition of AS 2658 is amended as follows.
AS 4466-1998 Hygienic production of rabbit meat for human consumption	Current Standards Australia	Sets out requirements for the production and hygiene quality control of meat from Rabbits processed for human consumption at all registered establishments in Australia. This Standard was developed by a technical subcommittee of the Standing Committee on Agriculture and Resource Management (SCARM) under the Agriculture and Resource Council of Australia and New Zealand (ARMCANZ); also known as SCARM Report 59.
AS 2658-2008 AMDT 1 LP Gas - Portable and mobile appliances	Superseded Standards Australia	The 2008 edition of AS 2658 is amended as follows.
AS 1684.3 C2 SUPP 9-2006 AMDT 1 Residential timber-framed construction, Part 3: Cyclonic areas - C2 Supplement 9: Timber framing span tables - Wind classification C3 - seasoned hardwood - Stress grade F27 (Supplement to AS 1684.3-2006)	Superseded Standards Australia
AS 4100:2020 Amd 1:2021 Steel Structures	Current Standards Australia	Correction amendment to AS 4100:2020.
AS 2908.1-1992 AMDT 1 Cellulose-cement products, Part 1: Corrugated sheets	Superseded Standards Australia	The 1992 edition of AS 2908.1 is amended as follows; the amendment should be inserted in the appropriate place.
AS/NZS 3500.0:2003 Plumbing and drainage, Part 0: Glossary of terms	Available Superseded Standards Australia/Standards New Zealand	Intended for the general water industry and for use in the interpretation of terminology used in the various parts of the Plumbing and drainage series of Standards and covers water supply from the reticulation main into the premises, including hot water service systems, sanitary fixtures, drainage and their associated water and waste fittings, pipe systems and associated components.
AS/NZS 3666.1:1995 Air-handling and water systems of buildings - Microbial control, Part 1: Design, installation and commissioning	Available Superseded Standards Australia/Standards New Zealand	Specifies minimum requirements for design, installation and commissioning of air-handling and water systems in buildings to assist in the control of microorganisms. It does not apply to sole occupancy dwellings, nor is it intended for the control of the wide range of discomfort symptoms which may affect the occupants of some buildings.
AS 1684.3-2010 Residential timber-framed construction, Part 3: Cyclonic areas	Available Superseded Standards Australia	Provides the building industry with procedures that can be used to determine building practice, to design or check construction details, and to determine member sizes, and bracing and fixing requirements for timber-framed construction in cyclonic areas.
AS/NZS 4200.1:1994 Pliable building membranes and underlays, Part 1: Materials	Superseded Standards Australia/Standards New Zealand	Specifies the requirements for materials suitable for use as a pliable building membrane (also known as underlay) when it is intended to act as a sarking membrane or thermal insulation, or a vapour barrier in a domestic, commercial or industrial building. It does not specify the thermal insulation requirements, nor does it include materials for use in air handling ducts.
AS 2419.1-2005 Fire hydrant installations, Part 1: System design, installation and commissioning	Available Superseded Standards Australia	Specifies requirements for the design, installation and commissioning of fire hydrants.
AS 3700:2018 Sup 1:2020 Masonry structures - Commentary (Supplement 1 to AS 3700:2018)	Current Standards Australia
AS 1530.3-1989 Methods for fire tests on building materials, components and structures, Part 3: Simultaneous determination of ignitability, flame propagation, heat release and smoke release	Superseded Standards Australia	Describes a single test for grading building materials on the basis of ignition tendency, flame spread, heat development and tendency to produce smoke; apparatus, test procedure and indices for grading are provided.
AS/NZS 2293.1:2018 Amd 1:2021 Emergency lighting and exit signs for buildings, Part 1: System design, installation and operation	Current Standards Australia/Standards New Zealand	The 2018 edition of AS/NZS 2293.1:2018 is amended as follows; the amendments should be inserted in the appropriate place.
AS 3600:2018 Amd 2:2021 Concrete structures	Current Standards Australia	The 2018 edition of AS 3600 is amended as follows; the amendments should be inserted in the appropriate places.
AS 2118.1:2017 Amd 2:2020 Automatic fire sprinkler systems, Part 1: General systems	Current Standards Australia	The 2017 edition of AS 2118.1 is amended as follows; the amendment(s) should be inserted in the appropriate place(s).
AS 4200.2:2017 Amd 1:2018 Pliable building membranes and underlays, Part 2: Installation	Current Standards Australia	The 2017 edition of AS 4200.2 is amended as follows; the amendment should be inserted in the appropriate place.
AS/NZS 2327:2017 Amd 1:2020 Composite structures - Composite steel-concrete construction in buildings	Current Standards Australia/Standards New Zealand	The 2017 edition of AS/NZS 2327 is amended as follows; the amendments should be inserted in the appropriate places.
AS 4200.2:2017 Amd 2:2021 Pliable building membranes and underlays, Part 2: Materials	Current Standards Australia	The 2017 edition of AS 4200.2 is amended as follows; the amendments should be inserted in the appropriate place.
AS 3959:2018 Amd 2:2020 Construction of buildings in bushfire-prone areas	Current Standards Australia	The 2018 edition of AS 3959 is amended as follows; the amendments should be inserted in the appropriate places.
AS 4200.1:2017 Amd 1:2021 Pliable building membranes and underlays, Part 1: Materials	Current Standards Australia	The 2017 edition of AS 4200.1 is amended as follows; the amendments should be inserted in the appropriate places.
AS 1546.3:2017 Amd 1:2018 On-site domestic wastewater treatment units, Part 3: Secondary treatment systems	Current Standards Australia	Amends the 2017 edition of AS 1546.3.
AS 1720.5:2015 Amd 1:2019 Timber structures, Part 5: Nailplated timber roof trusses	Current Standards Australia	The 2015 edition of AS 1720.5 is amended as follows; the amendments should be inserted in the appropriate places.
AS/NZS 1276.1:1999 Acoustics - Rating of sound insulation in buildings and of building elements, Part 1: Airborne sound insulation	Superseded Standards Australia/Standards New Zealand
AS 1276-1979 Methods for determination of sound transmission class and noise isolation class of building partitions	Superseded Standards Australia	Describes methods for determining four indices for rating the properties of partitions, including walls and floor-ceiling assemblies, used to divide spaces in domestic and commercial buildings in reducing the transmission of airborne sound; the four indices are sound transmission class, field sound transmission class, noise isolation class, and normalized noise isolation class.
AS 1056.1-1991 AMDT 2 Storage water heaters, Part 1: General requirements	Superseded Standards Australia
AS 1056.1-1991 AMDT 5 Storage water heaters, Part 1: General requirements	Superseded Standards Australia
AS 1056.1-1991 AMDT 3 Storage water heaters, Part 1: General requirements	Superseded Standards Australia
AS 1056.1-1991 AMDT 4 Storage water heaters, Part 1: General requirements	Superseded Standards Australia
AS 1056.1-1991 AMDT 1 Storage water heaters, Part 1: General requirements	Superseded Standards Australia	The 1991 edition of AS 1056.1 is amended as follows; the amendment should be inserted in the appropriate places.
AS 1056.1-1985 Storage water heaters - General requirements	Superseded Standards Australia
AS 1056-1977 Automatic electric storage water heaters with hot water deliveries ranging from 25 litres to 630 litres	Superseded Standards Australia	The standard sets out requirements which should ensure that automatic electric storage water heaters complying with its provisions will be manufactured with a good quality of workmanship, have a high standard of performance and durability, and be easily serviced.
AS 1170.1-1989 AMDT 1 Minimum design loads on structures (known as the SAA Loading Code), Part 1: Dead and live loads and load combinations	Superseded Standards Australia
AS 2867-1986 Farm structures - General requirements for structural design	Superseded Standards Australia
AS 1170.1-1981 Minimum design loads on structures (known as the SAA Loading Code), Part 1: Dead and live loads	Superseded Standards Australia	Covers the determination of minimum loads to be assumed in the structural design of buildings and related structures, but does not apply to special structures such as road and rail bridges and cranes nor to loads arising from fluid pressures; formulas for obtaining roof line loads and for determining permissible reductions in design live loads for floors, columns and bearing walls are given; tables are included of live loads to be assumed for a wide range of building uses or acceptances as well as of dead loads for the more commonly used building materials.
AS/NZS 1170.2:2002 Structural design actions, Part 2: Wind actions	Available Superseded Standards Australia/Standards New Zealand
AS/NZS 1170.2:2002 AMDT 1 Structural design actions, Part 2: Wind actions	Available Superseded Standards Australia/Standards New Zealand
AS/NZS 1170.3:2003 AMDT 1 Structural design actions, Part 3: Snow and ice actions	Current Standards Australia/Standards New Zealand	The 2003 edition of AS/NZS 1170.3 is amended as follows.
AS/NZS 1170.3:2003 Amd 2:2017 Structural design actions, Part 3: Snow and ice actions	Current Standards Australia/Standards New Zealand
AS 1170.3-1990 Minimum design loads on structures (known as the SAA Loading Code) - Snow loads	Superseded Standards Australia
AS 1170.4-2007 Amd 1:2015 Structural design actions, Part 4: Earthquake actions in Australia	Current Standards Australia	The 2007 edition of AS 1170.4 is amended as follows; the amendments should be inserted in the appropriate places.
AS 1191-1985 Acoustics - Method for laboratory measurement of airborne sound transmission loss of building partitions	Superseded Standards Australia
AS 1191-1976 Method for laboratory measurement of airborne sound transmission loss of building partitions	Superseded Standards Australia	Sets out the method for the measurement of the airborne sound transmission loss of building paritions such as walls, floor/ceiling assemblies, doors, windows, and other space-dividing elements; prescribes parameters for the room used for measurement
AS 1288-1973 Installation of glass in buildings	Superseded Standards Australia	Describes procedures intended to provide sound techniques for the installation of glass in buildings, irrespective of the size of glass or the exposure conditions.
AS 1288-1989 Glass in buildings - Selection and installation	Superseded Standards Australia	Sets out procedures for the selection of glass type, thickness, area, and span to comply with wind loading requirements and human impact considerations for framed and unframed glass assemblies.
AS 1288-1994 Glass in buildings - Selection and installation	Available Superseded Standards Australia	Specifies procedures for the selection of glass to comply with wind loading requirements and human impact considerations for framed and unframed glass assemblies of limited dimensions; the Standard also includes installation guidelines and appendices for design of glass fins as well as the interpretation of human impact considerations and wind load design charts.
AS 1288-1994 AMDT 1 Glass in buildings - Selection and installation	Superseded Standards Australia	The 1994 edition of AS 1288 is amended as follows; the amendments should be inserted in the appropriate places.
AS 1288-1994 AMDT 2 Glass in buildings - Selection and installation	Superseded Standards Australia	The 1994 edition of AS 1288 is amended as follows; the amendments should be inserted in the appropriate places.
AS 1288-2006 AMDT 1 Glass in buildings - Selection and installation	Superseded Standards Australia
AS 1288-2006 AMDT 2 Glass in buildings - Selection and installation	Superseded Standards Australia	The 2006 edition of AS 1288 is amended as follows.
AS 1288-2006 Amdt 3:2016 Glass in buildings - Selection and installation	Superseded Standards Australia	The 2006 edition of AS 1288 is amended as follows.
AS 1288 SUPP 1-2006 Glass in buildings - Selection and installation (Supplement to AS 1288-2006)	Current Standards Australia	Provides users of AS 1288-2006 with tables for minimum glass thicknesses calculated for stress and deflection limit state wind pressures.
AS 1397-1984 Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc coated	Superseded Standards Australia	Specifies requirements for hot-dipped zinc-coated or aluminium/zinc-coated steel sheet and strip, supplied in thickness from 0.25 mm up to and including 3.5 mm and widths up to and including 1525 mm.
AS 1397-1993 Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc-coated	Superseded Standards Australia
AS 1397-2001 Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc-coated	Superseded Standards Australia
AS 1397-2011 AMDT 1 Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium	Superseded Standards Australia
AS 1428.1-1988 Design for access and mobility, Part 1: General requirements for access - Buildings	Superseded Standards Australia	Sets out minimum requirements for elements of buildings and related facilities; in particular, access pathways, circulation spaces and fitments to permit access by people with disabilities. A set of transparent overlays of space modules to assist in the design of sanitary facilities is included. The Standard refers only to those technical requirements which are intended to be used with the current building requirements in Australia. Therefore, it does not refer to facilities such as lighting, shelving, work surfaces and hearing devices, nor does it refer to facilities such as baths and urinals, and specific design requirements for WCs suitable for people with ambulatory disabilities, as these are considered to be additional to minimum requirements for access and are included in Part 2 of the series.
AS 1428.1-2009 AMDT 1 Design for access and mobility - General requirements for access, Part 1: New building work	Superseded Standards Australia	The 2009 edition of AS 1428.1 is amended as follows.
AS 1428.1-2009 Amd 2:2017 Design for access and mobility, Part 1: General requirements for access	Superseded Standards Australia	The 2009 edition of AS 1428.1 is amended as follows; the amendments should be inserted in the appropriate places.
AS 1428 SUPP 1-1988 Design for access and mobility - Extracts - Design rules for access by the disabled (Supplement to AS 1428-1977)	Superseded Standards Australia	Reproduces those clauses or parts of clauses of AS 1428-1977 which have not been superseded by AS 1428.1-1988 or deleted in their present form.
AS 1428-1977 Code of practice of design rules for access by the disabled	Superseded Standards Australia	Sets out a method for determining the bulk density of fibrous loose-fill thermal insulation for buildings.
AS 1428.4-1992 AMDT 1 Design for access and mobility, Part 4: Tactile ground surface indicators for the orientation of people with vision impairment	Superseded Standards Australia	The 1992 edition of AS 1428.4 is amended as follows; the amendments should be inserted in the appropriate places.
AS 1530.1-1976 Methods for fire tests on building materials and structures, Part 1: Combustibility test for materials	Superseded Standards Australia	Sets out a test method for determining the combustibility of building materials and is one of a series of test methods for evaluating the potential fire hazard of building products.
AS 1530.2-1973 Methods for fire tests on building materials, components and structures, Part 2: Test for flammability of materials	Superseded Standards Australia	Describes procedure for preparing and determining flammability index of thin sheet or woven materials of pliable nature which are combustible and do not melt readily or shrink away from an igniting flame.
AS 1530.3-1989 AMDT 1 Methods for fire tests on building materials, components and structures, Part 3: Simultaneous determination of ignitability, flame propagation, heat release and smoke release	Superseded Standards Australia	The 1989 edition of AS 1530.3 is amended as follows; the amendment should be inserted in the appropriate place.
AS 1530.4-2005 Methods for fire tests on building materials, components and structures, Part 4: Fire-resistance test of elements of construction	Available Superseded Standards Australia	Sets out test procedures and criteria for the determination of fire-resistance of elements of building construction. Follows the basic principles and provisions contained in ISO 834.
AS 1530.4-1997 Methods for fire tests on building materials, components and structures, Part 4: Fire-resistance tests of elements of building construction	Superseded Standards Australia	Sets out test procedures and criteria for the determination of fire-resistance of elements of building construction. Follows the basic principles and provisions contained in ISO 834:1975.
AS 1530.4-1990 Methods for fire tests on building materials, components and structures, Part 4: Fire-resistance tests of elements of building construction	Superseded Standards Australia	Sets out test procedures and criteria for the determination of fire-resistance of elements of building construction. Follows the basic principles and provisions contained in ISO 834 - Fire-resistance tests - Elements of Building Construction.
AS 1562.1-1992 Design and installation of sheet roof and wall cladding, Part 1: Metal	Superseded Standards Australia	Sets out requirements for the design and installation of self-supporting metal roof and wall cladding, subjected to out-of-plane loading.
AS 1562.1-1992 AMDT 1 Design and installation of sheet roof and wall cladding, Part 1: Metal	Superseded Standards Australia
AS 1562.1-1992 AMDT 2 Design and installation of sheet roof and wall cladding, Part 1: Metal	Superseded Standards Australia
AS 1562.1-1992 AMDT 3 Design and installation of sheet roof and wall cladding, Part 1: Metal	Superseded Standards Australia
AS 1639-1974 Code of practice for design and installation of corrugated asbestos cement roofing	Superseded Standards Australia	This code provides for all those commonly accepted types of corrugated asbestos cement roofs manufactured in Australia which incorporate transverse laps (laps at the ends of sheets). The sheets are described the related standard specification for asbestos cement corrugated sheets for roofing and cladding (AS 1611).
AS 1639-1990 AMDT 1 The design and installation of corrugated fibre-reinforced cement roofing and wall cladding	Superseded Standards Australia
AS 1639-1990 The design and installation of corrugated fibre-reinforced cement roofing and wall cladding	Superseded Standards Australia	Specifies requirements for materials, design and installation of corrugated fibre-reinforced cement roofing and cladding.
AS 2424-1991 Plastics building sheets - General installation requirements and design of roofing systems	Superseded Standards Australia	Establishes procedures for the installation of plastics building sheets for walls and roofs and for the design of plastics roofing systems.
AS 2921-1987 Unplasticized polyvinyl chloride (UPVC) wall cladding - General installation requirements	Superseded Standards Australia	Specifies requirements for installed UPVC cladding over either existing walls or new framework; requirements include allowance for thermal expansion, fastener types, waterproofness, alignment, loading and resistance to soft body impact. Appendices give design information on loading and impact test method.
AS 1657-2013 Fixed platforms, walkways, stairways and ladders - Design, construction and installation	Available Superseded Standards Australia	Sets out requirements for the design, selection, construction and installation of fixed platforms, walkways, stairways and ladders that are intended to provide safe access to places used by operating, inspection, maintenance and servicing personnel.
AS 1657-2013 Amd 1:2016 Fixed platforms, walkways, stairways and ladders - Design, construction and installation	Available Superseded Standards Australia
AS 1657-1992 Fixed platforms, walkways, stairways and ladders - Design, construction and installation	Superseded Standards Australia	Specifies requirements for the design, construction and installation of fixed means of access to, and safe working at places normally used by operating, inspection, maintenance and servicing personnel.
AS 1657-1985 Fixed platforms, walkways, stairways and ladders - Design, construction and installation (known as the SAA Code for Fixed Platforms, Walkways, Stairways, and Ladders)	Superseded Standards Australia	Applies to design, construction and installation of fixed means of safe access to and safe working at places normally used by operating, inspection, maintenance and servicing personnel.
AS 1664-1979 Rules for the use of aluminium in structures (known as the SAA Aluminium Structures Code) (incorporating Corrig.)	Superseded Standards Australia
AS 1664-1975 SAA Aluminium structures code Metric Units	Superseded Standards Australia	Applies to the design and fabrication of aluminium alloy load-carrying members.
AS/NZS 1664.1:1997 AMDT 1 Aluminium structures, Part 1: Limit state design	Current Standards Australia/Standards New Zealand
AS/NZS 1664.2:1997 AMDT 1 Aluminium structures, Part 2: Allowable stress design	Current Standards Australia/Standards New Zealand	The 1997 edition of AS 1664.2 is amended as follows; the amendments should be inserted in the appropriate places.
AS 1668.1-1974 SAA Mechanical ventilation and air conditioning code, Part 1: Fire precautions in buildings with air-handling systems (Metric Units)	Superseded Standards Australia	Applies to the design, construction, installation and operation of air-handling systems, as related to precautions to prevent the spread of fire through buildings by way of the air-handling systems.
AS 1668.1-1979 The use of mechanical ventilation and air-conditioning in buildings (known as the SAA Mechanical Ventilation and Air-conditioning Code) - Fire precautions in buildings with air-handling systems	Superseded Standards Australia	Applies to the design, construction, installation and operation of air-handling systems in relation to fire protection of buildings; intended to assist in the prevention of fire and the spreading of the products of combustion through a building by the air-handling system.
AS 1668.1-1991 The use of mechanical ventilation and air-conditioning in buildings - Fire and smoke control	Superseded Standards Australia	Sets out the requirements for those aspects of design, construction, installation and operation of air-handling systems with a view to minimizing the spread of smoke and fire through buildings by way of the air-handling systems.
AS 1668.2 SUPP 1-1991 The use of mechanical ventilation and air-conditioning in buildings, Part 2: Mechanical ventilation for acceptable indoor-air quality - Commentary (Supplement to AS 1668.2-1991)	Superseded Standards Australia	Provides guidance on the application of the Code by explaining the intent of those clauses which could be the subject of requests for interpretation.
AS 1668.2-1976 SAA Mechanical ventilation and air conditioning code, Part 2: Ventilation requirements	Superseded Standards Australia	These rules are intended to provide the technical provisions covering ventilation requirements for public health and safety for mechanical ventilation and air conditioning of buildings but do not purport to comprise all the necessary provisions of a contract.
AS 1668.2-1980 The use of mechanical ventilation and air-conditioning in buildings (known as the SAA Mechanical Ventilation and Air-conditioning Code) - Ventilation requirements	Superseded Standards Australia	Applies to the design, construction, installation and operation of mechanical ventilation and air conditioning in buildings in relation to ventilation requirements for public health and safety.
AS 1670.1:2015 Fire detection, warning, control and intercom systems - System design, installation and commissioning - Part 1: Fire	Superseded Standards Australia
AS 1670.1:2015 Amd 1:2017 Fire detection, warning, control and intercom systems - System design, installation and commissioning, Part 1: Fire	Superseded Standards Australia
AS 1670.1-2004 Fire detection, warning, control and intercom systems - System design, installation and commissioning, Part 1: Fire	Available Superseded Standards Australia
AS 1670.1-2004 AMDT 1 Fire detection, warning, control and intercom systems - System design, installation and commissioning, Part 1: Fire	Available Superseded Standards Australia
AS 1670.1-1995 AMDT 2 Fire detection, warning, control and intercom systems - System design, installation and commissioning, Part 1: Fire	Superseded Standards Australia	The 1995 edition of AS 1670.1 is amended as follows; the amendment should be inserted in the appropriate place.
AS 1670.1-1995 AMDT 3 Fire detection, warning, control and intercom systems - System design, installation and commissioning, Part 1: Fire	Superseded Standards Australia
AS 1670.1-1995 AMDT 4 Fire detection, warning, control and intercom systems - System design, installation and commissioning, Part 1: Fire	Superseded Standards Australia
AS 1670-1995 AMDT 1 Automatic fire detection and alarm systems - System design, installation and commissioning	Superseded Standards Australia
AS 1670.3-2004 Fire detection, warning, control and intercom systems - System design, installation and commissioning - Fire alarm monitoring	Superseded Standards Australia	Specifies requirements for the connection between the monitored fire alarm system and the fire dispatch centre and includes the requirements for the monitoring equipment.
AS 1670.3-1997 Fire detection, warning control and intercom systems - System, design, installation and commissioning - Monitoring network performance	Superseded Standards Australia
AS 1670.4:2015 Fire detection, warning, control and intercom systems - System design, installation and commissioning - Part 4: Emergency warning and intercom systems	Superseded Standards Australia
AS 1670.4-2004 Fire detection, warning, control and intercom systems - System design, installation and commissioning, Part 4: Sound systems and intercom systems for emergency purposes	Available Superseded Standards Australia	Specifies requirements for the design, installation and commissioning of the components of sound systems and intercom systems for emergency purposes.
AS/NZS 1680.0:1998 Interior lighting, Part 0: Safe movement	Superseded Standards Australia/Standards New Zealand	Sets out minimum requirements for electric lighting systems within publicly accessible areas of buildings so as to provide visual conditions that facilitate the safe movement of people in the normal use of the building.
AS 1720.1-2010 AMDT 1 Timber structures, Part 1: Design methods	Current Standards Australia
AS 1720.1-2010 AMDT 2 Timber structures, Part 1: Design methods	Current Standards Australia
AS 1720.1-2010 Amd 3:2015 Timber structures, Part 1: Design methods	Current Standards Australia
AS 1720.1-1988 Timber structures (known as the SAA Timber Structures Code) - Design methods	Superseded Standards Australia
AS 1720.4-1990 Timber structures, Part 4: Fire-resistance of structural timber members	Available Superseded Standards Australia
AS 1735.11-1982 The design, installation, testing and operation of lifts, escalators and moving walks (known as the SAA Lift Code), Part 11: Fire-rated landing doors	Superseded Standards Australia
AS 1735.11-1975 Rules for the design, installation, testing and operation of lifts, escalators and moving walks (known as the SAA Lift Code), Part 11: Fire-rated landing doors	Superseded Standards Australia	Part 11 deals with requirements for the design and installation of landing doors to protect openings in fire-rated liftwells against the passage of fire, where the doors are required to have a fire-rated certificate.
AS 1735.12-1994 Lifts, escalators and moving walks - Facilities for persons with disabilities	Superseded Standards Australia
AS 1735.12-1999 AMDT 1 Lifts, escalators and moving walks, Part 12: Facilities for persons with disabilities	Superseded Standards Australia	The 1999 edition of AS 1735.12 is amended as follows; the amendment(s) should be inserted in the appropriate place.
AS/NZS 1859.4:2004 Reconstituted wood-based panels - Specifications, Part 4: Wet-processed fibreboard	Available Superseded Standards Australia/Standards New Zealand	Specifies requirements for the purpose of quality control in manufacture and performance requirements for the application of wet-processed fibreboards, including hardboards and softboards.
AS/NZS 1859.4(INT):2001 Reconstituted wood-based panels - Specifications, Part 4: Wet-processed fibreboard	Superseded Standards Australia/Standards New Zealand	Specifies product requirements for the purposes of quality control in manufacture and performance requirements for the application of wet-processed fibreboards, including hardboards, medium-boards and softboards.
AS/NZS 1859.4:1997 Reconstituted wood-based panels, Part 4: Hardboard	Superseded Standards Australia/Standards New Zealand	This Standard specifies requirements for the dimensions and properties of three grades of hardboard; appendices provide information on recommended procedures for testing and acceptance, purchasing guidelines, recommended practices for handling and storage of hardboard, and preferred sheet dimensions and quantities.
AS 1860.2-2006 AMDT 1 Particleboard flooring, Part 2: Installation	Current Standards Australia	The 2006 edition of AS 1860.2 is amended as follows.
AS 1860-1998 Installation of particleboard flooring	Superseded Standards Australia	Sets out procedures for the selection, placement and fixing of particleboard flooring complying with AS/NZS 1859.1; Appendices provide check lists for areas of supervision and recommendations for subfloor ventilation.
AS 1860-1991 Installation of particleboard flooring	Superseded Standards Australia	Describes a minimum standard of installation for particleboard flooring used in domestic housing; procedures may also apply to particleboard used as flooring in similar applications where the particleboard is applied over a system of parallel joists; specifies subfloor clearance and ventilation, floor joist spacing and sheet fixing for fitted and platform flooring systems.
AS 1905.1:2015 Amd 1:2016 Components for the protection of openings in fire-resistant walls, Part 1: Fire-resistant doorsets	Current Standards Australia
AS 1905.1-1976 Construction and installation of fire doors, fire windows and fire shutters (known as the SAA Fire Door Code), Part 1: Fire Doors	Superseded Standards Australia
AS 1905.1-1990 Components for the protection of openings in fire-resistant walls - Fire-resistant doorsets	Superseded Standards Australia	Specifies requirements for the construction and installation of fire-resistant doorsets, other than lift-landing doors, used to protect openings in walls and partitions required to resist the passage of fire.
AS/NZS 1905.1:1997 Components for the protection of openings in fire-resistant walls, Part 1: Fire-resistant doorsets	Superseded Standards Australia/Standards New Zealand
AS 1905.2-1984 Components for the protection of openings in fire-resistant walls (known as the SAA Fire door code), Part 2: Fire-resistant roller shutters	Superseded Standards Australia
AS 1905.2-1989 Components for the protection of openings in fire-resistant walls (known as the SAA Fire Door Code) - Fire-resistant roller shutters	Superseded Standards Australia	Specifies requirements for design, construction and installation of roller shutters intended to protect trafficable openings in fire-rated walls. Compliance is based on prototype testing in accordance with AS 1530.4. Certification and labelling requirements are included. Design details of a typical 2-hour fire-rated roller shutter assembly are provided in an appendix.
AS 1926.1-2007 Swimming pool safety, Part 1: Safety barriers for swimming pools	Available Superseded Standards Australia
AS 1926.1-2007 AMDT 1 Swimming pool safety, Part 1: Safety barriers for swimming pools	Current Standards Australia	The 2007 edition of AS 1926.1 is amended as follows.
AS 1926.1-1993 AMDT 1 Swimming pool safety, Part 1: Fencing for swimming pools	Superseded Standards Australia	The 1993 edition of AS 1926.1—1993 is amended as follows; the amendment should be inserted in the appropriate place.
AS 1926-1986 Fences and gates for private swimming pools	Available Superseded Standards Australia	Specifies design, construction and performance of child-resistant fences and gates intended primarily for use in preventing access by young children to domestic swimming pools.
AS 1926.2-1995 Swimming pool safety, Part 2: Location of fencing for private swimming pools	Available Superseded Standards Australia
AS 1926.2(INT)-1993 Swimming pool safety, Part 2: Location of fencing for private swimming pools	Superseded Standards Australia
AS 1926.2-2007 AMDT 1 Swimming pool safety, Part 2: Location of safety barriers for swimming pools	Current Standards Australia	The 2007 edition of AS 1926.2 is amended as follows.
AS 1926.2-2007 AMDT 2 Swimming pool safety, Part 2: Location of safety barriers for swimming pools	Current Standards Australia	The 2007 edition of AS 1926.2 is amended as follows.
AS 1926.3-2010 AMDT 1 Swimming pool safety, Part 3: Water recirculation systems	Current Standards Australia	The 2010 edition of AS 1926.3 is amended as follows.
AS 1926.3-2003 Swimming pool safety - Water recirculation systems	Superseded Standards Australia
AS 1926.3-1993 Swimming pool safety - Water recirculation and filtration systems	Superseded Standards Australia
AS 2818-1986 Guide to swimming pool safety	Superseded Standards Australia
AS 2047-1999 AMDT 1 Windows in buildings - Selection and installation	Available Superseded Standards Australia
AS 2047-1999 AMDT 2 Windows in buildings - Selection and installation	Available Superseded Standards Australia
AS 2047-1999 Windows in buildings - Selection and installation	Available Superseded Standards Australia	Specifies requirements for materials, construction, installation and glazing for windows, sliding doors, adjustable glass louvres, shopfronts, and window walls with one-piece framing elements.
AS 2047.1-1996 Windows in buildings - Specification for materials and performance	Superseded Standards Australia
AS 2047.2-1996 Windows in buildings - Construction, installation and maintenance	Superseded Standards Australia
AS 2047-1977 Aluminium windows for buildings	Superseded Standards Australia	Includes details of materials to be used in the manufacture of aluminium windows, design criteria, glazing, corrosion protection and performance requirements; test requirements are provided for structural performance, operating force, air infiltration and water penetration.
AS 2047:2014 Amd 2:2017 Windows and external glazed doors in buildings	Current Standards Australia	The 2014 edition of AS 2047 is amended as follows.
AS 2047:2014 Amd 1:2016 Windows and external glazed doors in buildings	Current Standards Australia	The 2014 edition of AS 2047 is amended as follows in the document.
AS 2049-1992 Roof tiles	Superseded Standards Australia
AS 2049-2002 AMDT 1 Roof tiles	Current Standards Australia	The 2002 edition of AS 2409 is amended as follows.
AS 1757-1989 Concrete roofing tiles	Superseded Standards Australia	Specifies requirements for concrete roofing tiles, both with and without weathering check.
AS 2049-1989 Terracotta roofing tiles	Superseded Standards Australia	Specifies requirements for most types of terracotta roofing tiles including shingle (plain), side locking and head-and-side locking.
AS 2049-1977 Specification for terra cotta roofing tiles	Superseded Standards Australia	Applies to terra cotta roofing tiles and accessories.
AS 2050-1995 AMDT 1 Installation of roof tiles	Superseded Standards Australia
AS 2050-2002 AMDT 2 Installation of roof tiles	Superseded Standards Australia
AS 2050-2002 AMDT 1 Installation of roof tiles	Superseded Standards Australia
AS 2050-1995 Installation of roof tiles	Superseded Standards Australia
AS 2050-1989 Fixing of roofing tiles	Superseded Standards Australia
AS 2050-1995 AMDT 2 Installation of roof tiles	Superseded Standards Australia	The 1995 edition of AS 2050 is amended as follows; the amendments should be inserted in the appropriate places.
AS 2050-2002 Installation of roof tiles	Superseded Standards Australia	Sets out requirements for the placement and installing of roof tiles of the types specified in AS 2049; the installing methods described in This Standard apply only to tiled roofs of buildings that are intended for domestic, commercial or light industrial purposes for wind classifications N1-N4 and C1-C3 inclusive; this Standard applies only to roofs with pitches of 15 degrees or greater.
AS 2118.1-2006 Automatic fire sprinkler systems, Part 1: General systems	Superseded Standards Australia	The objective of this edition is to include changes that reflect recent advances in technology and to refine the content for clarity and conciseness.
AS 2118.1-1999 AMDT 1 Automatic fire sprinkler systems, Part 1: General requirements	Superseded Standards Australia	The 1999 edition of AS 2118.1 is amended as follows.
AS 2118.6-1995 Automatic fire sprinkler systems - Combined sprinkler and hydrant	Superseded Standards Australia
AS 2118.4-1995 Automatic fire sprinkler systems - Residential	Superseded Standards Australia	Specifies the design, installation and commissioning of sprinklers for life safety and property protection for the inhabitants of low-rise Class 2 and Class 3 buildings as defined in the BCA.
AS 2118.1-1999 Automatic fire sprinkler systems - General requirements	Superseded Standards Australia	Specifies the general requirements for the design, installation and commissioning of automatic fire sprinkler systems in buildings.
AS 2118.1:2017 Amd 1:2017 Automatic fire sprinkler systems, Part 1: General systems	Current Standards Australia
AS 2118.1-2006 AMDT 1 Automatic fire sprinkler systems, Part 1: General systems	Superseded Standards Australia
AS 2159-2009 AMDT 1 Piling - Design and installation	Current Standards Australia
AS 2159-1995 AMDT 1 Piling - Design and installation	Available Superseded Standards Australia
AS 2159-1995 Piling - Design and installation	Superseded Standards Australia
AS 2159-1978 Rules for the design and installation of piling (known as the SAA Piling Code)	Superseded Standards Australia
AS/NZS 2179.1:1994 Specifications for rainwater goods, accessories and fasteners, Part 1: Metal shape or sheet rainwater goods, and metal accessories and fasteners	Superseded Standards Australia/Standards New Zealand	Specifies both performance and prescriptive requirements for a limited range of nominal sizes for metal shape or sheet rainwater goods, and metal accessories and fasteners made of aluminium alloys, aluminium/zinc alloy-coated steel, copper and copper alloys, zinc-coated steel, stainless steel and zinc.
AS 2179-1986 Metal rainwater goods - Specification	Superseded Standards Australia	Specifies requirements for metal rainwater goods made of aluminium and aluminium alloys, aluminium/zinc-coated steel, copper and copper alloys, zinc-coated steel, stainless steel and zinc; also applies to metal accessories, metal fasteners and metal tanks for storage of rainwater; appendices include purchasing guidelines and a method for determination of gutter rigidity.
AS/NZS 2269.0:2012 Amd 1:2015 Plywood - Structural, Part 0: Specifications	Current Standards Australia/Standards New Zealand
AS/NZS 2269.0:2008 Plywood - Structural, Part 0: Specifications	Superseded Standards Australia/Standards New Zealand	Provides minimum performance requirements and specifications for the manufacture and application of structural plywood, acceptable to users, specifiers, manufacturers, and building authorities in Australia and New Zealand.
AS/NZS 2269:2004 Plywood - Structural	Available Superseded Standards Australia/Standards New Zealand
AS/NZS 2269:1994 Plywood - Structural	Superseded Standards Australia/Standards New Zealand	This Standard specifies requirements for the manufacture and grading of structural plywood.
AS/NZS 2293.1:1995 Emergency evacuation lighting for buildings, Part 1: System design, installation and operation	Superseded Standards Australia/Standards New Zealand	Sets out requirements for the design, installation and operation of electric emergency evacuation lighting systems for buildings.
AS/NZS 2293.1:1998 Emergency evacuation lighting for buildings, Part 1: System design, installation and operation	Superseded Standards Australia/Standards New Zealand	Sets out requirements for the design, installation and operation of electric emergency evacuation lighting systems for buildings, so as to provide visual conditions which will alleviate panic and permit safe evacuation of the building's occupants, should this be necessary, in the event of failure of the electrical supply to the normal lighting.
AS 2293.1-2005 Emergency escape lighting and exit signs for buildings - System design, installation and operation	Superseded Standards Australia	Specifies the requirements for the design and installation of systems of emergency escape lighting and illuminated exit signage intended to illuminate upon failure of supply to the normal lighting; includes requirements specific to central battery and single point/self contained arrangements; does not include standby lighting or high risk task area lighting; does not specify the types of buildings where these systems are required; does not specify maintenance requirements (Refer to AS 2293.2); does not detail constructional requirements for complying exit signs (Refer to AS 2293.3); includes basic information to assist in correct choice and spacings of exit signs.
AS 2293.1-2005 Amd 2:2014 Emergency escape lighting and exit signs for buildings, Part 1: System design, installation and operation	Superseded Standards Australia
AS 2293.1-2005 AMDT 1 Emergency escape lighting and exit signs for buildings - System design, installation and operation	Superseded Standards Australia
AS 2327.1-2003 Composite structures, Part 1: Simply supported beams	Superseded Standards Australia
AS 2327.1-1996 Composite structures - Simply supported beams	Superseded Standards Australia	Sets out minimum requirements for the design, detailing and construction of simply supported composite beams composed of a steel beam interconnected to a concrete slab by shear connectors, including applications in which the slab incorporates profiled steel sheeting.
AS 2327.1-1980 Composite construction in structural steel and concrete (known as the SAA Composite Construction Code) - Simply supported beams	Superseded Standards Australia	Covers design of encased beams and composite beams with slabs incorporating profiled steel sheeting; flexural design by either the load factor method or the working strength method; serviceability; shear connection design; longitudinal shear transfer; construction; and testing of shear connectors.
AS 2419.1-2005 AMDT 1 Fire hydrant installation, Part 1: System design, installation and commissioning	Superseded Standards Australia	The 2005 edition of AS 2419.1 is amended in the documents.
AS 2419.1-1994 Fire hydrant installations - System design, installation and commissioning	Superseded Standards Australia
AS 2419.1-1994 AMDT 2 Fire hydrant installations, Part 1: System design, installation and commissioning	Superseded Standards Australia
AS 2419.1-1994 AMDT 1 Fire hydrant installations, Part 1: System design, installation and commissioning	Superseded Standards Australia
AS 2419.1-1991 Fire hydrant installations, Part 1: System design, installation and commissioning	Superseded Standards Australia	Specifies requirements for installation within properties of fire hydrants which may, in certain cases, be supplemented by hydrants installed by water supply authorities on street mains.
AS 2441-2005 AMDT 1 Installation of hose reels	Current Standards Australia	The 2005 edition of AS 2441 is amended as follows; the amendments should be inserted in the appropriate places.
AS 2441-1988 Installation of fire hose reels	Superseded Standards Australia	Specifies requirements for connection of water supply, location and mounting and includes commissioning tests.
AS 2441-1983 The installation of fire hose reels	Superseded Standards Australia
AS 2441-1981 The installation of fire hose reels	Superseded Standards Australia
AS 2444-1995 Portable fire extinguishers and fire blankets - Selection and location	Superseded Standards Australia	Specifies criteria for the selection of extinguishers based on classification and rating, including requirements for location and distribution of extinguishants based on classification and rating, and the potential hazard classification.
AS 2444-1995 AMDT 1 Portable fire extinguishers and fire blankets - Selection and location	Superseded Standards Australia
AS 2444-1995 AMDT 2 Portable fire extinguishers and fire blankets - Selection and location	Superseded Standards Australia
AS 2444-1990 Portable fire extinguishers - Selection and location	Superseded Standards Australia	Specifies criteria for the selection of extinguishers based on extinguisher classification and rating, and specifies requirements for the location and distribution of extinguishers based on extinguisher classification and rating, and the potential hazard classification. A selection chart is included as an appendix.
AS 2444-1985 Portable fire extinguishers - Selection and location	Available Superseded Standards Australia
AS 2665-1983 Smoke/heat venting systems - Design, installation and commissioning	Superseded Standards Australia	Sets out requirements for the design, installation and commissioning of smoke/heat release vents in conjunction with associated draught curtains and inlet ventilation in a building, for the purpose of venting smoke and hot gases from the building in the event of fire.
AS/NZS 2699.3:2000 Built-in components for masonry construction, Part 3: Lintels and shelf angles (durability requirements)	Superseded Standards Australia/Standards New Zealand
AS 2870-1996 Residential slabs and footings - Construction	Available Superseded Standards Australia	Sets out the requirements for the classification of a site and the design and construction of a footing system for a single dwelling house, town house or the like which may be detached or separated by a party wall or common wall but not situated vertically above or below another dwelling.
AS 2870-1996 AMDT 1 Residential slabs and footings - Construction	Superseded Standards Australia
AS 2870.1-1988 AMDT 2 Residential slabs and footings, Part 2: Construction	Withdrawn Standards Australia
AS 2870-1996 AMDT 3 Residential slabs and footings - Construction	Superseded Standards Australia
AS 2870-1996 AMDT 4 Residential slabs and footings - Construction	Superseded Standards Australia
AS 2870.2-1990 AMDT 1 Residential slabs and footings, Part 2: Guide to design by engineering principles	Superseded Standards Australia
AS 2870.2-1990 AMDT 2 Residential slabs and footings, Part 2: Guide to design by engineering principles	Superseded Standards Australia
AS 2870.1-1988 AMDT 1 Residential slabs and footings, Part 1: Construction	Withdrawn Standards Australia	The 1988 edition of AS 2870.1 is amended as follows in the document.
AS 2870-1986 Residential slabs and footings	Superseded Standards Australia	Applies to houses and to one- or two-storey buildings containing more than one dwelling and to other forms of commercial construction of similar size; sets out requirements for the classification of a site and the design and construction of a footing system which supports a masonry or framed one- or two-storey house; the performance requirement of the Standard is the avoidance of significant damage, provided the site is properly maintained in accordance with Appendix A.
AS 2890.1-1993 Parking facilities, Part 1: Off-street car parking	Available Superseded Standards Australia
AS 2890.1-1986 Off-street parking - Car parking facilities	Superseded Standards Australia	Sets out minimum requirements for the provision of off-street parking facilities in surface areas and structures for motor cars including other light vehicles and motorcycles. It is intended for those designers involved in the design of off-street parking facilities in terms of the characteristics and location of vehicle access to and from the road network, the site of parking spaces and aisles, service areas and access ramps.
AS 2904-1986 Damp-proof courses and flashings	Withdrawn Standards Australia	Specifies performance requirements for damp-proof courses and flashing materials of sheet membrane type, for use in building construction.
AS/NZS 2904:1995 AMDT 1 Damp-proof courses and flashings	Current Standards Australia/Standards New Zealand
AS/NZS 2904:1995 AMDT 2 Damp-proof courses and flashings	Current Standards Australia/Standards New Zealand
AS 2908.2-1992 Cellulose-cement products - Flat sheets	Superseded Standards Australia	Specifies requirements for flat fibre-reinforced sheets for both internal and external applications.
AS 2908.1-1992 Cellulose-cement products, Part 1: Corrugated sheets	Superseded Standards Australia	The 1992 edition of AS 2908.1 is amended as follows; the amendment should be inserted in the appropriate place.
AS 2908-1987 Cellulose cement products - Corrugated sheets for roofing and cladding	Superseded Standards Australia	Specifies composition and physical requirements for cellulose cement corrugated sheets primarily for use as roofing and cladding.
AS/NZS 2918:2001 Domestic solid fuel burning appliances - Installation	Available Superseded Standards Australia/Standards New Zealand
AS 2918-1990 Domestic solid fuel burning appliances - Installation	Available Superseded Standards Australia
AS 2918-1990 AMDT 1 Domestic solid fuel burning appliances - Installation	Superseded Standards Australia
AS 2918-1987 Domestic solid fuel burning appliances - Installation	Superseded Standards Australia
AS/NZS 3013:1995 Electrical installations - Classification of the fire and mechanical performance of wiring systems	Superseded Standards Australia/Standards New Zealand	Sets out a classification scheme for wiring systems according to their resistance to the hazards of fire and mechanical damage. Type tests to verify the level of protection provided by a wiring system are given. Intended for reference in other Standards which specify wiring systems with a degree of resistance to damage from fire or mechanical impact.
AS 3013-1990 Electrical installations - Wiring systems for specific applications	Superseded Standards Australia	Sets out a classification scheme for wiring systems according to their resistance to the hazards of fire and mechanical damage.
AS/NZS 3500.0:1995 National Plumbing and Drainage Code, Part 0: Glossary of terms	Available Superseded Standards Australia/Standards New Zealand	Specifies terms primarily intended for use in the interpretation of plumbing and drainage Standards, and covers water supply from the reticulation main into the premises, including hot water service systems, sanitary fixtures, drainage and their associated water and waste fittings, pipe systems and associated components.
AS/NZS 3500.1:2003 Plumbing and drainage, Part 1: Water services	Available Superseded Standards Australia/Standards New Zealand
AS/NZS 3500.1:2003 AMDT 1 Plumbing and drainage, Part 1: Water services	Available Superseded Standards Australia/Standards New Zealand	The 2003 edition of AS/NZS 3500.1 is amended as follows; the amendments should be inserted in the appropriate places.
AS/NZS 3500.1:2003 AMDT 2 Plumbing and drainage, Part 1: Water services	Available Superseded Standards Australia/Standards New Zealand	The 2003 edition of AS/NZS 3500.1 is amended as follows; the amendments should be inserted in the appropriate places.
AS/NZS 3500.1:2015 Plumbing and drainage, Part 1: Water services	Superseded Standards Australia/Standards New Zealand	Sets out requirements for the installation of water services from the point of connection to the network utility’s water supply or from an alternative drinking water supply to the points of discharge; applies to new installations as well as alterations, additions and repairs to existing installations.
AS/NZS 3500.1:2015 Amd 1:2017 Plumbing and drainage, Part 1: Water services	Available Superseded Standards Australia/Standards New Zealand	The 2015 edition of AS/NZS 3500.1 is amended as follows; the amendments should be inserted in the appropriate places.
AS/NZS 3500.1.2:1998 National plumbing and drainage, Part 1.2: Water supply - Acceptable solutions	Superseded Standards Australia/Standards New Zealand
AS/NZS 3500.2:2015 Plumbing and drainage, Part 2: Sanitary plumbing and drainage	Available Superseded Standards Australia/Standards New Zealand	Specifies requirements for the design and installation of sanitary plumbing and drainage from fixtures to a sewer, common effluent system or an on-site wastewater management system; applies to new installations, additions or repairs to existing installations.
AS/NZS 3500.2:2015 Amd 2 Plumbing and drainage, Part 2: Sanitary plumbing and drainage	Available Superseded Standards Australia/Standards New Zealand
AS/NZS 3500.2:2003 Plumbing and drainage, Part 2: Sanitary plumbing and drainage	Available Superseded Standards Australia/Standards New Zealand	The objective of this Standard is to provide installers with solutions to comply with the Plumbing Code of Australia; and the New Zealand Building Code (Clause G13 Foul water).
AS/NZS 3500.2.2:1996 AMDT 1 National Plumbing and Drainage, Part 2.2: Sanitary plumbing and drainage - Acceptable solutions	Available Superseded Standards Australia/Standards New Zealand
AS/NZS 3500.2:2003 AMDT 2 Plumbing and drainage, Part 2: Sanitary plumbing and drainage	Available Superseded Standards Australia/Standards New Zealand	The 2003 edition of AS/NZS 3500.2 is amended as follows; the amendment(s) should be inserted in the appropriate place(s).
AS/NZS 3500.2:2003 AMDT 3 Plumbing and drainage, Part 2: Sanitary plumbing and drainage	Available Superseded Standards Australia/Standards New Zealand
AS/NZS 3500.2:2003 AMDT 4 Plumbing and drainage, Part 2: Sanitary plumbing and drainage	Available Superseded Standards Australia/Standards New Zealand
AS/NZS 3500.2.2:1996 National plumbing and drainage, Part 2.2: Sanitary plumbing and drainage - Acceptable solutions	Available Superseded Standards Australia/Standards New Zealand	Specifies the requirements for the design and installation of sanitary plumbing and sanitary drainage from the fixtures to a sewer, common effluent system or on-site disposal system, as appropriate.
AS/NZS 3500.2 Amd 1:2017 Plumbing and drainage, Part 2: Sanitary plumbing and drainage	Available Superseded Standards Australia/Standards New Zealand	Specifies requirements for the design and installation of sanitary plumbing and drainage from fixtures to a sewer, common effluent system or an on-site wastewater management system; applies to new installations, additions or repairs to existing installations.
AS/NZS 3500.3:2015 Plumbing and drainage, Part 3: Stormwater drainage	Superseded Standards Australia/Standards New Zealand	Sets out requirements for materials, design, installation and testing of roof drainage systems, surface drainage systems and subsoil drainage systems to a point of connection.
AS/NZS 3500.3:2003 Plumbing and drainage, Part 3: Stormwater drainage	Available Superseded Standards Australia/Standards New Zealand	Provides criteria for materials, design, installation and testing of roof drainage systems, surface drainage systems and subsoil drainage systems to a point of connection.
AS/NZS 3500.3:2003 AMDT 1 Plumbing and drainage, Part 3: Stormwater drainage	Available Superseded Standards Australia/Standards New Zealand	The 2003 edition of AS/NZS 3500.3 is amended as follows; the amendment should be inserted in the appropriate places.
AS/NZS 3500.3:2003 AMDT 2 Plumbing and drainage, Part 3: Stormwater drainage	Available Superseded Standards Australia/Standards New Zealand
AS/NZS 3500.3:2003 AMDT 3 Plumbing and drainage, Part 3: Stormwater drainage	Available Superseded Standards Australia/Standards New Zealand
AS/NZS 3500.4:2018 Amd 1:2018 Plumbing and drainage, Part 4: Heated water services	Available Superseded Standards Australia/Standards New Zealand
AS/NZS 3500.4:2015 Plumbing and drainage, Part 4: Heated water services	Superseded Standards Australia/Standards New Zealand	Sets out requirements for the design, installation and commissioning of heated water services using drinking water, rainwater or a combination thereof; it applies to new installations as well as alterations, additions and repairs to existing installations.
AS/NZS 3500.4:2015 Amd 1:2017 Plumbing and drainage, Part 4: Heated water services	Available Superseded Standards Australia/Standards New Zealand	The 2015 edition of AS/NZS 3500.4 is amended as follows; the amendment(s) should be inserted in the appropriate place(s).
AS/NZS 3500.4:2003 Plumbing and drainage, Part 4: Heated water services	Available Superseded Standards Australia/Standards New Zealand	Sets out requirements for the design, installation and commissioning of heated water services using drinking water, rainwater or a combination thereof.
AS/NZS 3500.4:2003 AMDT 1 Plumbing and drainage, Part 4: Heated water services	Available Superseded Standards Australia/Standards New Zealand
AS/NZS 3500.4:2003 AMDT 2 Plumbing and drainage, Part 4: Heated water services	Available Superseded Standards Australia/Standards New Zealand
AS 3600:2018 Amd 1:2018 Concrete Structures	Current Standards Australia	The 2018 edition of AS 3600 is amended as follows; the amendments should be inserted in the appropriate places.
AS 3600-2009 Concrete structures	Available Superseded Standards Australia
AS 3600-2009 AMDT 1 Concrete structures	Available Superseded Standards Australia
AS 3600-2009 AMDT 2 Concrete structures	Available Superseded Standards Australia
AS 3600-2001 Concrete structures	Superseded Standards Australia	Sets out minimum requirements for the analysis, design and construction of concrete structures and members that contain reinforcing steel up to 500 MPa, prestressing tendons or both, and includes requirements for plain concrete structures and members; design requirements are given for the limit states of stability, strength, serviceability, durability and for resistance requirements to fire and earthquakes; rules are also given for prototype or proof testing of finished members and structures.
AS 3600-1994 AMDT 1 Concrete structures	Superseded Standards Australia
AS 3600-2001 AMDT 2 Concrete structures	Superseded Standards Australia
AS 3600-1994 Concrete structures	Available Superseded Standards Australia	Sets out minimum requirements for the analysis, design and construction of concrete structures and members which contain reinforcing steel, or prestressing tendons or both, and requirements for plain concrete structures and members; the Standard applies to concrete with a characteristic compressive strength in the range of 20 MPa to 50 MPa and a density in the range 1800 kg/m(sup)3(/sup) to 2800 kgm(sup)3(/sup).
AS 3600-2009 Supp 1:2014 Concrete Structures - Commentary (Supplement to AS 3600-2009)	Superseded Standards Australia	Provides background reference material to AS 3600-2009, indicates the origin of particular requirements and departures from previous practice, and explains the application of certain Clauses.
AS 3660.1-2000 Termite management, Part 1: New building work	Available Superseded Standards Australia	Sets out requirements for the design and construction of subterranean termite management systems for new buildings and ground level extensions and renovations.
AS 3660.1-1995 Protection of buildings from subterranean termites - New buildings	Superseded Standards Australia	Sets out methods for implementation during construction for minimizing the risk to new buildings from damage by subterranean termites.
AS 3660.1-1995 AMDT 1 Protection of buildings from subterranean termites, Part 1: New buildings	Superseded Standards Australia
AS 3660-1993 Protection of buildings from subterranean termites - Prevention, detection and treatment of infestation	Superseded Standards Australia
AS 3660.3-2000 Termite management, Part 3: Assessment criteria for termite management systems	Available Superseded Standards Australia	Specifies the criteria for assessing the effectiveness of termite management systems intended for use in buildings and structures as required by AS 3660.1 or AS 3660.2 It also outlines procedures to assess the ability of a system and its components to manage termite activity in and around buildings and structures.
AS/NZS 3666.1:2002 Air-handling and water systems of buildings - Microbial control, Part 1: Design, installation and commissioning	Superseded Standards Australia/Standards New Zealand	Specifies minimum requirements for the design, installation and commissioning of air-handling and water systems of buildings, other than sole occupancy dwellings, for the purposes of microbial control. It does not include requirements for refrigerated room airconditioners and non-ducted split systems.
AS 3700-2011 Masonry structures	Available Superseded Standards Australia	Provides designers, engineers and specifiers with the minimum requirements for the design and construction of unreinforced, reinforced and prestressed masonry, including built-in components, for use in masonry applications.
AS 3700-2011 AMDT 1 Masonry structures	Superseded Standards Australia	The 2011 edition of AS 3700 is amended as follows; the amendments should be inserted in the appropriate places.
AS 3700-2011 Amd 2:2015 Masonry structures	Superseded Standards Australia
AS 3700-2001 Masonry structures	Superseded Standards Australia	Provides designers, engineers and specifiers with the minimum requirements for the design and construction of unreinforced, reinforced and prestressed masonry, including built-in components, for use in masonry applications.
AS 3700-2001 AMDT 1 Masonry structures	Superseded Standards Australia
AS 3700-2001 AMDT 2 Masonry structures	Superseded Standards Australia
AS 3700-2001 AMDT 3 Masonry structures	Superseded Standards Australia	The 2001 edition of AS 3700 is amended as follows; the amendment(s) should be inserted in the appropriate place(s)
AS 3700-1998 Masonry structures	Superseded Standards Australia	Specifies the minimum requirements for the design and construction of unreinforced, reinforced and prestressed masonry, and the design of wall ties; includes an increased use of performance-type specification of requirements and the virtual work method for the design of unreinforced masonry subject to wind or earthquake loads; it also includes the design and construction of AAC, and provides additional requirements for the design of structures subject to earthquake actions.
AS 3700 Supp 1-2012 Masonry structures - Commentary (Supplement 1 to AS 3700 - 2011)	Superseded Standards Australia	Provides background information and explanations on the clauses of AS 3700-2011, Masonry structures.
AS 3700 SUPP 1-2004 Masonry structures - Commentary (Supplement to AS 3700-2001)	Available Superseded Standards Australia	Provides background information and explanations on the clauses of AS 3700-2001, Masonry structures.
AS 3700 SUPP 1-1999 Masonry structures - Commentary (Supplement to AS 3700-1998)	Superseded Standards Australia	Provides background information and explanations on the clauses of AS 3700-1998, Masonry structures.
AS 3740-2004 Waterproofing of wet areas within residential buildings	Superseded Standards Australia	Sets out criteria for wet areas within residential buildings. It gives minimum requirements for materials, designs and installations.
AS 3740-2010 AMDT 1 Waterproofing of domestic wet areas	Superseded Standards Australia
AS 3740-1994 Waterproofing of wet areas within residential buildings	Available Superseded Standards Australia	Specifies design requirements and materials for the waterproofing of shower areas and areas subject to infrequent wetting or splashing within residential buildings.
AS 3740-1994 AMDT 1 Waterproofing of wet areas within residential buildings	Withdrawn Standards Australia	The 1994 edition of AS 3740 is amended in the document.
AS 3740-1989 Waterproofing of wet areas within residential buildings	Superseded Standards Australia	Specifies design requirements and materials for the waterproofing of shower areas and areas subject to infrequent wetting or splashing within residential buildings.
AS 3786:2014 Amd 1:2015 Smoke alarms using scattered light, transmitted light or ionization	Available Superseded Standards Australia
AS 3786:2014 Amd 2:2018 Smoke alarms using scattered light, transmitted light or ionization	Available Superseded Standards Australia	Specifies requirements, test methods and functional criteria for smoke alarms that operate using scattered light, transmitted light or ionization, intended for household or similar residential applications (Amendment 2, 2018).
AS 3786-1993 Smoke alarms	Available Superseded Standards Australia	Specifies the requirements for the design and performance of electrically operated smoke alarms containing detection and alarm facilities.
AS 3786-1993 AMDT 1 Smoke alarms	Available Superseded Standards Australia
AS 3786-1993 AMDT 2 Smoke alarms	Available Superseded Standards Australia	The 1993 edition of AS 3786 is amended in the following document.
AS 3786-1993 AMDT 3 Smoke alarms	Available Superseded Standards Australia
AS 3786-1993 AMDT 4 Smoke alarms	Available Superseded Standards Australia
AS 3786-1990 Self-contained smoke alarms	Superseded Standards Australia
AS/NZS 3823.1.2:2001 Performance of electrical appliances - Airconditioners and heat pumps, Part 1.2: Test methods - Ducted airconditioners and air-to-air heat pumps - Testing and rating for performance	Available Superseded Standards Australia/Standards New Zealand	Specifies the conditions on which the capacity and energy consumption of factory-made residential, commercial and industrial, electrically driven, mechanical-compression, single-package and split-system, ducted airconditioners employing air- and water-cooled condensers and ducted heat pumps employing air-cooled condensers are based.
AS/NZS 3823.1.2:2001 AMDT 1 Performance of electrical appliances - Airconditioners and heat pumps, Part 1.2: Test methods - Ducted airconditioners and air-to-air heat pumps - Testing and rating for performance	Superseded Standards Australia/Standards New Zealand
AS/NZS 3823.1.2:2001 AMDT 2 Performance of electrical appliances - Airconditioners and heat pumps, Part 1.2: Test methods - Ducted airconditioners and air-to-air heat pumps - Testing and rating for performance	Available Superseded Standards Australia/Standards New Zealand
AS/NZS 3823.1.2:2001 AMDT 3 Performance of electrical appliances - Airconditioners and heat pumps, Part 1.2: Test methods - Ducted airconditioners and air-to-air heat pumps - Testing and rating for performance	Superseded Standards Australia/Standards New Zealand
AS/NZS 3823.1.2:2001 AMDT 4 Performance of electrical appliances - Airconditioners and heat pumps, Part 1.2: Test methods - Ducted airconditioners and air-to-air heat pumps - Testing and rating for performance	Superseded Standards Australia/Standards New Zealand
AS/NZS 3823.1.2:2001 AMDT 5 Performance of electrical appliances - Air conditioners and heat pumps, Part 1.2: Energy labelling and minimum energy performance standard (MEPS) requirements	Superseded Standards Australia/Standards New Zealand
AS 3959:2018 Amd 1:2019 Construction of buildings in bushfire-prone areas	Current Standards Australia	The 2018 edition of AS 3959 is amended as follows; the amendments should be inserted in the appropriate places.
AS 3959-2009 Construction of buildings in bushfire-prone areas	Available Superseded Standards Australia	Sets out requirements for the construction of buildings in bushfire-prone areas in order to improve their performance when they are subjected to burning debris, radiant heat or flame contact generated from a bushfire.
AS 3959-2009 AMDT 1 Construction of buildings in bushfire-prone areas	Available Superseded Standards Australia
AS 3959-1991 Construction of buildings in bushfire-prone areas	Superseded Standards Australia
AS 3959-2009 AMDT 3 Construction of buildings in bushfire-prone areas	Available Superseded Standards Australia	The 2009 edition of AS 3959 is amended as follows; the amendments should be inserted in the appropriate places.
AS 3959-2009 AMDT 2 Construction of buildings in bushfire-prone areas	Available Superseded Standards Australia
AS 3959-1999 AMDT 1 Construction of buildings in bushfire-prone areas	Superseded Standards Australia
AS 3959-1999 AMDT 2 Construction of buildings in bushfire-prone areas	Superseded Standards Australia
AS 3959-1999 Construction of buildings in bushfire-prone areas	Superseded Standards Australia	Sets out requirements for the design and construction of buildings in bushfire-prone areas in order to improve their performance when they are subjected to burning debris, radiant heat or flame contact generated from a bushfire.
AS/NZS 4020:2005 Testing of products for use in contact with drinking water	Superseded Standards Australia/Standards New Zealand	Sets out requirements for the suitability of products for use in contact with drinking water. Appendices provide test methods for evaluating those parameters that have the potential to affect the quality of the water.
AS/NZS 4020:2002 Testing of products for use in contact with drinking water	Superseded Standards Australia/Standards New Zealand	Sets out requirements for the suitability of products for use in contact with drinking water; appendices provide test methods for evaluating those parameters that have the potential to affect the quality of water.
AS/NZS 4020:1999 Products for use in contact with drinking water	Superseded Standards Australia/Standards New Zealand	Specifies requirements for the suitability of products for use in contact with drinking water. Appendices contain test methods for evaluating those parameters that may adversely affect the quality of the water. The use of scaling factors to relate these parameters to end-use conditions is provided.
AS/NZS 4020:1999 AMDT 1 Products for use in contact with drinking water	Withdrawn Standards Australia/Standards New Zealand
AS 4055-2012 Amd 1:2015 Wind loads for housing	Superseded Standards Australia
AS 4055-2006 Wind loads for housing	Superseded Standards Australia
AS 4055-2006 AMDT 1 Wind loads for housing	Current Standards Australia
AS 4055-1992 Wind loads for housing	Superseded Standards Australia
AS 4055-1992 AMDT 1 Wind loads for housing	Superseded Standards Australia	The 1992 edition of AS 4055 is amended as follows; the amendment should be inserted in the appropriate place.
AS 4072.1-2005 AMDT 1 Components for the protection of openings in fire-resistant separating elements, Part 1: Service penetrations and control joints	Current Standards Australia	The 2005 edition of AS 4072.1 is amended as follows.
AS 4072.1-1992 Components for the protection of openings in fire-resistant separating elements - Service penetrations and control joints	Superseded Standards Australia
AS 4100-1998 AMDT 1 Steel structures	Superseded Standards Australia
AS 4100-1990 Steel structures	Superseded Standards Australia
AS 4100-1990 AMDT 1 Steel structures	Withdrawn Standards Australia
AS 4100-1990 AMDT 2 Steel structures	Withdrawn Standards Australia
AS 4100-1990 AMDT 3 Steel structures	Withdrawn Standards Australia	The 1990 edition of AS 4100 is amended as follows; the amendments should be inserted in the appropriate places.
AS 4100 SUPP 1-1990 Steel structures - Commentary (Supplement to AS 4100-1990)	Superseded Standards Australia	This Commentary provides background material to the requirements of AS 4100, Steel structures (revisions of AS 1250-1981, SAA Steel Structures Code, and AS 1511-1984, SAA High-strength Structural Bolting Code). It gives the origin of certain requirements, departures from previous practice and explains the application of certain clauses.
AS 4100 SUPP 1-1999 Steel structures - Commentary (Supplement to AS 4100-1998)	Current Standards Australia	Provides background information and guidance to the requirements of AS 4100-1998.
AS 1250-1981 The use of steel in structures (known as the SAA Steel Structures Code)	Superseded Standards Australia	Applies to the design, fabrication, erection, repair and alteration of steel structures, including foot and service bridges, but does not apply to road and rail bridges, material less than 3 mm thick, steel for which the design yield stress exceeds 450 MPa, and cold-formed structures (see AS 1538).
AS 1511-1984 Use of high-strength bolts in steel structures (known as the SAA High-strength Structural Bolting Code)	Superseded Standards Australia
AS/NZS 4200.1:1994 AMDT 1 Pliable building membranes and underlays, Part 1: Materials	Superseded Standards Australia/Standards New Zealand
AS/NZS 4200.2:1994 Pliable building membranes and underlays, Part 2: Installation requirements	Superseded Standards Australia/Standards New Zealand
AS 1736-1975 Code of practice for pliable roof sarking	Superseded Standards Australia	Specifies requirements for sarking materials, and describes methods to be followed to ensure an effective seal in a sarking membrane and to provide adequate safety for personnel when the membrane is used in conjunction with wide spacing of rafters or purlins.
AS 1904-1976 Code of practice for installation of reflective foil laminate in buildings	Superseded Standards Australia	Describes the procedures to be followed for the installation of reflective foil laminate in domestic, commercial or industrial buildings; covers the use of the material as a sarking membrane under tile, metal deck or corrugated sheet roofs, and as a vapour barrier or thermal insulation (or both) over ceilings, in walls and gables, and under floors.; sarking procedures for roofs of both rafter and purlin construction are described, together with treatment at eaves, ridges, and valleys.
AS/NZS 4234:2008 AMDT 1 Heated water systems - Calculation of energy consumption	Superseded Standards Australia/Standards New Zealand
AS/NZS 4234:2008 AMDT 2 Heated water systems - Calculation of energy consumption	Superseded Standards Australia/Standards New Zealand
AS/NZS 4234:2008 Amd 3:2014 Heated water systems - Calculation of energy consumption	Superseded Standards Australia/Standards New Zealand
AS 4234-1994 Solar water heaters - Domestic and heat pump - Calculation of energy consumption	Available Superseded Standards Australia	Sets out a method of determining the annual performance of domestic solar and heat pump water heaters using a combination of test results for component performance and a mathematical model to determine annual load cycle task performance.
AS 4254-1995 Ductwork for air-handling systems in buildings	Superseded Standards Australia
AS 4254-2002 Ductwork for air-handling systems in buildings	Superseded Standards Australia	Specifies the requirements for performance, materials, construction and installation of ductwork for air-handling systems in buildings.
AS/NZS 4284:1995 Testing of building facades	Superseded Standards Australia/Standards New Zealand	Specifies methods of testing building facades for environmental loading including water penetration and air infiltration as well as structural tests.
AS/NZS 4504.0:1998 Domestic garage doors - Methods of test, Part 0: Introduction and list of methods	Superseded Standards Australia/Standards New Zealand
AS/NZS 4504.1:1998 Domestic garage doors - Methods of test, Method 1: Test sample and preparation of wind pressure test	Superseded Standards Australia/Standards New Zealand	Specifies requirements for test sample and the methods of preparation for test.
AS/NZS 4504.2:1998 Domestic garage doors - Methods of test, Method 2: Wind pressure test	Superseded Standards Australia/Standards New Zealand	Sets out a method for determining the performance of domestic garage doors designed for installation in domestic buildings; addresses the wind pressure of the test sample.
AS/NZS 4504.3:1998 Domestic garage doors - Methods of test, Method 3: Durability cycle test	Superseded Standards Australia/Standards New Zealand	Sets out the method to be applied when testing domestic garage doors, as defined in AS/NZS 4505, for durability.
AS/NZS 4505:2012 Amd 1:2015 Garage doors and other large access doors	Current Standards Australia/Standards New Zealand	The 2012 edition of AS/NZS 4505 is amended as follows; the amendments should be inserted in the appropriate places.
AS/NZS 4505:1998 Domestic garage doors	Superseded Standards Australia/Standards New Zealand	Specifies requirements for the design, construction, performance and installation of domestic garage doors; also specifies the resultant loads on structures onto which such garage doors are mounted.
AS 4586:2013 Amd 1:2017 Slip resistance classification of new pedestrian surface materials	Current Standards Australia	Amendment No. 1 to 4586:2013.
AS/NZS 4586:2004 Slip resistance classification of new pedestrian surface materials	Superseded Standards Australia/Standards New Zealand	Provides means of classifying pedestrian surface materials according to their frictional characteristics when determined in accordance with test methods proposed by this Standard.
AS/NZS 4586:2004 AMDT 1 Slip resistance classification of new pedestrian surface materials	Superseded Standards Australia/Standards New Zealand
AS/NZS 4586:1999 Slip resistance classification of new pedestrian surface materials	Superseded Standards Australia/Standards New Zealand	Provides test methods and a classification system for the slip resistance of new pedestrian surface materials. The Standard is to be used by manufacturers of pedestrian surface materials.
AS/NZS 4586:1999 AMDT 1 Slip resistance classification of new pedestrian surface materials	Withdrawn Standards Australia/Standards New Zealand
AS/NZS 4600:2005 Cold-formed steel structures	Superseded Standards Australia/Standards New Zealand	Sets out minimum requirements for the design of structural members cold-formed to shape from carbon or low-alloy steel sheet, strip, plate or bar not more than 25 mm in thickness and used for load-carrying purposes in buildings.
AS/NZS 4600:2005 AMDT 1 Cold-formed steel structures	Superseded Standards Australia/Standards New Zealand
AS/NZS 4600:1996 Cold-formed steel structures	Superseded Standards Australia/Standards New Zealand
AS/NZS 4600 SUPP 1:1998 Cold-formed steel structures - Commentary (Supplement to AS/NZS 4600:1996)	Pending Revision Standards Australia/Standards New Zealand	Provides background information and guidance to the requirements of AS/NZS 4600:1996.
AS 4654.1-2009 Waterproofing membrane systems for exterior use - Above ground level, Part 1: Materials	Superseded Standards Australia	Sets out the requirements for the end performance of materials used in external waterproofing membrane systems for all buildings.
AS 4654.2-2009 Waterproofing membrane systems for exterior use - Above ground level, Part 2: Design and installation	Superseded Standards Australia
AS 4678-2002 AMDT 2 Earth-retaining structures	Current Standards Australia
AS 4678-2002 AMDT 1 Earth-retaining structures	Current Standards Australia	The 2002 edition of AS 4678 is amended as follows; the amendments should be inserted in the appropriate places.
AS 4773.1:2015 Amd 1:2016 Masonry in small buildings, Part 1: Design	Current Standards Australia	The 2015 edition of AS 4773.1 is amended as follows in the document.
AS 4773.1-2010 Masonry in small buildings - Design	Superseded Standards Australia	Sets out minimum requirements for the design of unreinforced and reinforced masonry for use in small buildings.
AS 4773.1-2010 AMDT 1 Masonry in small buildings, Part 1: Design	Superseded Standards Australia	The 2010 edition of AS 4773.1 is amended as follows; the amendment(s) should be inserted in the appropriate place(s).
AS 4773.2-2010 Masonry in small buildings - Construction	Superseded Standards Australia
AS/NZS 4859.1:2002 AMDT 1 Materials for the thermal insulation of buildings, Part 1: General criteria and technical provisions	Available Superseded Standards Australia/Standards New Zealand
AS/NZS 4859.1:2002 Materials for the thermal insulation of buildings, Part 1: General criteria and technical provisions	Available Superseded Standards Australia/Standards New Zealand	Provides requirements and methods of test for materials that are added to, or incorporated in, opaque envelopes of buildings designed for human occupancy, to provide thermal insulation by moderating the flow of heat through these elements.
AS 2352-1980 Glossary of terms for thermal insulation of buildings	Superseded Standards Australia	Lays down preferred terminology.
AS 2461-1981 Mineral wool thermal insulation - Loose fill	Superseded Standards Australia
AS 2462-1981 Cellulosic fibre thermal insulation	Superseded Standards Australia
AS 2463-1981 Sea grass bulk thermal insulation	Superseded Standards Australia
AS 2464.1-1981 Methods of testing thermal insulation, Method 1: Corrosiveness of thermal insulation	Superseded Standards Australia	This standard sets out a method of test to determine whether in the presence of moisture the fibres of thermal insulation when in contact with metals normally used in dwellings will cause corrosion.
AS 2464.2-1981 Methods of testing thermal insulation - Bulk density of blown fibrous loose-fill thermal insulation	Superseded Standards Australia	Sets out a method for determining the bulk density of fibrous loose-fill thermal insulation for buildings.
AS 2464.3-1983 Methods of testing thermal insulation, Method 3: Thermal resistance of low-density loose-fill insulation	Superseded Standards Australia
AS 2464.4-1981 Methods of testing thermal insulation, Method 4: Length, width and thickness of batt or blanket type thermal insulation	Superseded Standards Australia
AS 2464.5-1985 Methods of testing thermal insulation, Method 5: Steady-state thermal transmission properties by means of the heat flow meter	Superseded Standards Australia	This standard sets out a method for determining the steady-state thermal transmission properties of thermal insulation materials within the limits set by Clause 5, by means of a heat flow meter.
AS 2464.6-1983 Methods of testing thermal insulation - Steady-state thermal transmission properties by means of the guarded hot plate	Superseded Standards Australia
AS 2464.7-1990 Methods of testing thermal insulation, Method 7: Determination of the average thermal resistance of low-density mineral wool thermal insulation - Batt and blanket type	Superseded Standards Australia
AS 3742-1990 Mineral wool thermal insulation - Batt and blanket	Superseded Standards Australia	Specifies details of materials and manufacture, thermal resistance, combustion characteristics, dimensions, packaging and marking and includes an appendix on test specimen selection for mineral wool thermal insulation.
AS 5113:2016 Amd 1:2018 Classification of external walls of buildings based on reaction to fire performance	Current Standards Australia	The 2016 edition of AS 5113 is amended as follows.
AS 5146.1:2015 Amd 1:2018 Reinforced Autoclaved Aerated Concrete, Part 1: Structures	Current Standards Australia	The 2015 edition of AS 5146.1 is amended as follows; the amendments should be inserted in the appropriate places.
SA TS 101:2015 Design of post-installed and cast-in fastenings for use in concrete	Available Superseded Standards Australia
AS 1684.2-2006 AMDT 1 Residential timber-framed construction, Part 2: Non-cyclonic areas	Superseded Standards Australia
AS 1684.2-1999 Residential timber-framed construction, Part 2: Non-cyclonic areas	Superseded Standards Australia	Specifies requirements for building practice and for the selection, placement and fixing of the various structural elements used in the construction of timber-framed Class 1 and Class 10 buildings, as defined in the Building Code of Australia, for non-cyclonic areas; sets out building practice procedures, which are given to assist in the correct specification and design of timber members, bracing and connections thereby minimizing the risk of creating an environment that might adversely affect the ultimate performance of the structure; appendices specify a method of interpolation for Span Tables in the Supplements, and an alternative procedure for determining racking forces; guidance is given on mass of roof, timber natural durability, moisture content, timber species and properties.
AS 1684.2-1999 AMDT 2 Residential timber-framed construction, Part 2: Non-cyclonic areas	Withdrawn Standards Australia
AS 1684.2-1999 AMDT 1 Residential timber-framed construction, Part 2: Non-cyclonic areas	Withdrawn Standards Australia	The 1999 edition of AS 1684.2 is amended as follows.
AS 1684.2-1999 AMDT 4 Residential timber-framed construction, Part 2: Non-cyclonic areas	Withdrawn Standards Australia
AS 1684.2-1999 AMDT 3 Residential timber-framed construction, Part 2: Non-cyclonic areas	Withdrawn Standards Australia	The 1999 edition of AS 1684.2 is amended as follows; the amendments should be inserted in the appropriate places.
AS 1684.3-2006 Residential timber-framed construction, Part 3: Cyclonic areas	Superseded Standards Australia	Specifies requirements for building practice and for the selection, placement and fixing of the various structural elements used in the construction of timber-framed Class 1 and Class 10 buildings, as defined in the Building Code of Australia, for cyclonic areas.
AS 1684.3-2006 AMDT 1 Residential timber-framed construction, Part 3: Cyclonic areas	Superseded Standards Australia
AS 1684.3-2010 AMDT 1 Residential timber-framed constructions, Part 3: Cyclonic areas	Superseded Standards Australia	AS 1684.3-2010 is Amended as follows.
AS 1684.4-2010 AMDT 1 Residential timber-framed constructions, Part 4: Simplified - Non-cyclonic areas	Current Standards Australia
AS 1684.4-2006 Residential timber-framed construction - Simplified - Non-cyclonic areas	Superseded Standards Australia
AS 1684.4-2006 AMDT 1 Residential timber-framed construction, Part 4: Simplified - Non-cyclonic areas	Superseded Standards Australia
AS 1684.4-1999 Residential timber-framed construction, - Simplified - Non-cyclonic areas	Superseded Standards Australia	Specifies requirements for building practice and for the selection, placement and fixing of the various structural elements used in the construction of timber-framed Class 1 and Class 10 buildings, as defined in the Building Code of Australia, for non-cyclonic wind classifications N1 and N2.
AS 1684.4-1999 AMDT 1 Residential timber-framed construction, Part 4: Simplified-Non-cyclonic areas	Withdrawn Standards Australia
AS 1684.4-1999 AMDT 2 Residential timber-framed construction, Part 4: Simplified - Non-cyclonic areas	Withdrawn Standards Australia
AS 1684.4-1999 AMDT 3 Residential timber-framed construction, Part 4: Simplified - Non-cyclonic areas	Withdrawn Standards Australia	The 1999 edition of AS 1684.4 is amended as follows; the amendments should be inserted in the appropriate places.
AS 1905.1-2005 Components for the protection of openings in fire-resistant walls, Part 1: Fire-resistant doorsets	Superseded Standards Australia
AS 2699-1984 Wall ties for masonry construction	Superseded Standards Australia
AS 2870-1996 AMDT 2 Residential slabs and footings - Construction	Superseded Standards Australia
AS/NZS 3500.2:2003 AMDT 1 Plumbing and drainage, Part 2: Sanitary plumbing and drainage	Available Superseded Standards Australia/Standards New Zealand	The 2003 edition of AS/NZS 3500.2 is amended as follows.
AS 3600-2001 AMDT 1 Concrete structures	Superseded Standards Australia	The 2001 edition of AS 3600 is amended as follows; the amendments should be inserted in the appropriate places.
AS 1250-1981 AMDT 2 The use of steel in structures (known as the SAA Steel Structures Code)	Withdrawn Standards Australia	AS 1250-1981 amended as follows in the document.
AS 4254-2002 AMDT 1 Ductwork for air-handling systems in buildings	Superseded Standards Australia
AS 4254-2002 AMDT 2 Ductwork for air-handling systems in buildings	Superseded Standards Australia	The 2002 edition of AS 4254 is amended as follows; the amendments should be inserted in the appropriate places.
AS 4254-1995 AMDT 1 Ductwork for air-handling systems in buildings	Superseded Standards Australia
AS 4254-1995 AMDT 2 Ductwork for air-handling systems in buildings	Superseded Standards Australia
AS 2462-1981 AMDT 2 Cellulosic fibre thermal insulation	Superseded Standards Australia	The 1981 edition of AS 2462 is amended as follows; the amendments should be inserted in the appropriate places.
AS 2462-1981 AMDT 1 Cellulosic fibre thermal insulation	Superseded Standards Australia
AS/NZS 1170.2:2011 Amd 5:2017 Structural design actions, Part 2: Wind actions	Current Standards Australia/Standards New Zealand	The 2011 edition of AS/NZS 1170.2 is amended as follows; the amendments should be inserted in the appropriate places.
AS 1170.4-2007 Amd 2:2018 Structural design actions, Part 4: Earthquake actions in Australia	Current Standards Australia	The 2007 edition of AS 1170.4 is amended as follows in the document.
AS 1170.4-1993 AMDT 1 Minimum design loads on structures (known as the SAA Loading Code), Part 4: Earthquake loads	Superseded Standards Australia
AS 1191-1985 AMDT 1 Acoustics - Method for laboratory measurement of airborne sound transmission loss of building partitions	Superseded Standards Australia
AS 1639-1974 AMDT 1 Code of practice for design and installation of corrugated asbestos cement roofing	Superseded Standards Australia
AS 1664-1979/INTERP 1-1985 Rules for the use of aluminium in structures - Interpretation No:1	Superseded Standards Australia	The 1979 edition of AS 1664 is interpreted as follows.
AS 1668.2-2002 AMDT 2 The use of ventilation and airconditioning in buildings, Part 2: Ventilation design for indoor air contaminant control	Current Standards Australia
AS 1668.2-2002 AMDT 1 The use of ventilation and airconditioning in buildings, Part 2: Ventilation design for indoor air contaminant control	Current Standards Australia	The 2002 edition of AS 1668.2 is amended as follows; the amendment should be inserted in the appropriate place.
AS 1684.2-2010 AMDT 2 Residential timber-framed construction, Part 2: Non-cyclonic areas	Available Superseded Standards Australia
AS 1684.4-1999 AMDT 4 Residential timber-framed construction, Part 4: Simplified - Non-cyclonic areas	Withdrawn Standards Australia
AS 1720.1-1997 AMDT 2 Timber structures, Part 1: Design methods	Superseded Standards Australia
AS 1720.1-1997 AMDT 3 Timber structures, Part 1: Design methods	Superseded Standards Australia
AS 1720.1-1997 AMDT 4 Timber structures, Part 1: Design methods	Superseded Standards Australia
AS 1720.1-1997 AMDT 1 Timber structures (known as the SAA Timber Structures Code), Part 1: Design methods	Available Superseded Standards Australia	The 1997 edition of AS 1720.1 is amended as follows in the document.
AS/NZS 2269:2004 AMDT 1 Plywood - Structural	Superseded Standards Australia/Standards New Zealand
AS/NZS 2269:1994 AMDT 1 Plywood - Structural	Superseded Standards Australia/Standards New Zealand
AS 2699-1984 AMDT 2 Wall ties for masonry construction	Withdrawn Standards Australia
AS/NZS 3500.1.2:1998 AMDT 1 National plumbing and drainage, Part 1.2: Water supply - Acceptable solutions	Available Superseded Standards Australia/Standards New Zealand	The 1998 edition of AS/NZS 3500.1.2 is amended as follows; the amendments should be inserted in the appropriate places.
AS/NZS 3500.2.2:1996 AMDT 2 National Plumbing and Drainage, Part 2.2: Sanitary plumbing and drainage - Acceptable solutions	Available Superseded Standards Australia/Standards New Zealand
AS/NZS 3666.1:1995 AMDT 1 Air-handling and water systems of buildings - Microbial control, Part 1: Design, installation and commissioning	Available Superseded Standards Australia/Standards New Zealand
AS 3700-1998 AMDT 1 Masonry structures	Superseded Standards Australia	The 1998 edition of AS 3700 is amended as follows; the amendments should be inserted in the appropriate places.
AS 3700-1998 AMDT 2 Masonry structures	Superseded Standards Australia	The 1998 edition of AS 3700—1998AS 3700 is amended as follows; the amendment(s) should be inserted in the appropriate place(s).
AS 1684.2-2010 AMDT 1 Residential timber-framed constructions, Part 2: Non-cyclonic areas	Available Superseded Standards Australia
AS 1684.3-1999 Residential timber-framed construction - Cyclonic areas	Superseded Standards Australia	Specifies requirements for building practice and for the selection, placement and fixing of the various structural elements used in the construction of timber-framed Class 1 and Class 10 buildings, as defined in the Building Code of Australia, for cyclonic areas; it also sets out building practice procedures, which are given to assist in the correct specification and design of timber members, bracing and connections thereby minimizing the risk of creating an environment that might adversely affect the ultimate performance of the structure.
AS 1684.3-1999 AMDT 4 Residential timber-framed construction, Part 3: Cyclonic areas	Withdrawn Standards Australia
AS 1684.3-1999 AMDT 2 Residential timber-framed construction, Part 3: Cyclonic areas	Withdrawn Standards Australia
AS 1684.3-1999 AMDT 3 Residential timber-framed construction, Part 3: Cyclonic areas	Withdrawn Standards Australia
AS 1684.3-1999 AMDT 1 Residential timber-framed construction, Part 3: Cyclonic areas	Withdrawn Standards Australia	The 1999 edition of AS 1684.3 is amended as follows; the amendments should be inserted in the appropriate places.
AS 1670.3:2018 Amd 1:2021 Fire detection, warning, control and intercom systems, Part 3: System design, installation and commissioning	Current Standards Australia	AS 1670.3:2018 is amended as follows; the amendments should be inserted in the locations as instructed.