Search all content

Current document versions only

1 - 6 of 6 results

AS 1288:2021 Glass in buildings - Selection and installation 2021 cover

Name

AS 1288:2021 Glass in buildings - Selection and installation

Publisher

Standards Australia

Version: Fifth Edition 2021. (Current)

Sets out procedures for the selection and installation of glass in buildings, subject to wind loading, human impact, and special applications. Glass strength is specified, based on the tensile stresses on the surface of the glass.

1 results

found in this document show

Page 4

… by the Joint Standards Australia/Standards New Zealand Committee BD‑007, Glazing and Fixing of Glass, to supersede AS 1288—2006. The objective of this document is to provide uniform … and to clarify technical definitions. This document will be referenced in the Building Code of Australia 2022; thereby superseding AS 1288—2006. The most significant changes of this … Sections 1, 6 and 7 only). This document makes recommendations for design and installation practice based on proven techniques. Notes to the text contain information and guidance. They …

AS/NZS 1562.2:1999 Design and installation of sheet roof and wall cladding, Part 2: Corrugated fibre-reinforced cement 1999 cover

Name

AS/NZS 1562.2:1999 Design and installation of sheet roof and wall cladding, Part 2: Corrugated fibre-reinforced cement

Publisher

Standards Australia/Standards New Zealand

Version: First Edition 1999. (Current)

Sets out requirements for the materials, design and installation of corrugated fibre-reinforced cement roof and wall cladding; provides test procedures for the determination of resistance to wind force; appendix gives advice on the provision of roof ventilation.

1 results

found in this document show

Page 21

… Standard: AS 1170 1170.1 1170.2 Minimum design loads on structures (Known as the SAA Loading Code) Part 1: Dead and live loads and load combinations Part 2: Wind loads 1397 Steel sheet and … structures 4100 Steel structures AS/NZS 1554 1554.1 Structural steel welding Part 1: Welding of steel structures 1562 1562.3 Design and installation of sheet roof and wall cladding Part 3: … NZS 3404 3404.1 Steel structures standard Part 1: Steel structures standard 3604 Code of practice for light timber frame buildings not requiring specific design 4203 Code of practice …

AS 3999:2015 Bulk thermal insulation - Installation 2015 cover

Name

AS 3999:2015 Bulk thermal insulation - Installation

Publisher

Standards Australia

Version: Second Edition 2015. (Current)

Sets out requirements on installing insulation in both new dwellings during construction and the retrofitting of insulation in existing buildings.

1 results

found in this document show

Page 23

… gaps, joints and thermal bypass The following requirements apply: (a) Gaps around the edges of insulation segments, on all four edges, both sides or gaps at the top and bottom shall be … and compression shall be avoided as this will reduce the effectiveness of insulation. C3.2.1 In practice, the R-value of a building element will depend the material R-value of the insulation … installation itself. R-values for building elements are specified in the National Construction Code (NCC), so insulation must be conformance is achieved. to a large extent on the quality of …

AS 1562.1:2018 Design and installation of metal roof and wall cladding, Part 1: Metal 2018 cover

Name

AS 1562.1:2018 Design and installation of metal roof and wall cladding, Part 1: Metal

Publisher

Standards Australia

Version: Second Edition 2018. (Current)

This Standard sets out requirements for the design and installation of self-supporting metal roof and wall cladding, subjected to out-of-plane external actions and in-plane thermally induced actions, permanent actions on walls and steep roofs and frictional drag of wind and snow actions.

2 results

found in this document show

Page 28

… 26 APPENDIX B WATER PENETRATION (Informative) B1 WATER PENETRATION Correct installation of cladding and flashings will minimize water entry through the building envelope. Water may … systems: (a) SA HB 39. (b) NZ Acceptable Solution E2/AS1. (c) NZ Metal Roof and Wall Cladding Code of Practice. To provide an effective seal against wind-driven rain, most flashings should also be …

Page 35

… the informative documents referenced in this Standard: AS 2312 2312.1 Guide to the protection of iron and steel against exterior atmospheric corrosion Part 1: Paint coatings 4600 Cold formed … method—Static load tests for horizontal diaphragms including floors and roofs Eurocode 3—Design of steel structures—Parts 1-3: General Supplementary rules for cold-formed members … Zealand Ministry of Business Innovation and Employment NZ Metal Roof and Wall Cladding Code of Practice (2012), New Zealand Metal Roofing Manufacturers Inc TR 440 (1978) ‘Guidelines for the …

AS 4440-2004 Installation of nailplated timber roof trusses 2004 cover

Name

AS 4440-2004 Installation of nailplated timber roof trusses

Publisher

Standards Australia

Version: Second Edition 2004. (Current)

Specifies basic requirements for the bracing, connection and installation of nailplated timber roof trusses. Requirements are given for supporting structures, roof truss installation, roof bracing, truss connection and overhangs.