Search all content

Current document versions only

81 - 90 of 435 results

AS 1684.3:2021 Residential timber-framed construction, Part 3: Cyclonic areas 2021 cover

Name

AS 1684.3:2021 Residential timber-framed construction, Part 3: Cyclonic areas

Publisher

Standards Australia

Version: Fourth Edition 2021. (Current)

Provides the building industry with procedures that can be used to determine building practice, to design or check construction details, and to determine member sizes, and bracing and fixing requirements for time-framed construction in cyclonic area.

1 results

found in this document show

Page 9

… and general Scope and application 1.1.1 Scope This Standard specifies requirements for building practice and the selection, placement and fixing of the various structural elements used in the construction of timber-framed Class 1 and Class 10 buildings as defined by the National Construction Code and within the limitations given in Clause 1.4. The provisions of this Standard also apply …

A guide to Australian building product conformity 2018. cover

Name

A guide to Australian building product conformity

Publisher

Australian Building Codes Board

Version: 2018. (Current)

A guide for those businesses and building professionals that must ensure the products and materials they procure and use in building and construction are ‘fit for purpose’ and conform and comply with Australian building laws and standards and any other local requirements.

1 results

found in this document show

Page 12

… Figure 3.1 demonstrates the compliance hierarchy of the NCC. Figure 3.1: NCC compliance hierarchy The Australian Building Codes Board is responsible for the National Construction Code. The Code includes both the … to. The National Construction Code references many Australian Standards. How the NCC works in practice Planning and Building Regulation State and Territory planning and building laws provide …

AS 4465-2006 Construction of premises and hygienic production of poultry meat for human consumption 2006 cover

Name

AS 4465-2006 Construction of premises and hygienic production of poultry meat for human consumption

Publisher

Standards Australia

Version: Third Edition 2006. (Current)

Written in compliance and consistency with Codex Alimentarius Volume 10.

5 results

found in this document show

Page 7

… Australian Standard for Construction of Premises and Hygienic Production of Poultry Meat for Human Consumption PREFACE The Primary … In March 1995, ARMCANZ determined that aspects of all existing national meat industry codes relevant to human health would be mandated by amendment of legislation in all states and … (MSC). After formation, MSC commenced a fundamental review of existing codes of hygienic practice to express mandatory national meat hygiene standards in outcome terms. The resulting …

Page 11

… Australian Standard for Construction of Premises and Hygienic Production of Poultry Meat for Human Consumption 1 SCOPE Part A of this … for Human Consumption. Operation under this Standard implies compliance with the relevant Model Code of Practice for the Welfare of Animals and the Model Code of Practice for the Welfare of Animals – …

Page 17

… Australian Standard for Construction of Premises and Hygienic Production of Poultry Meat for Human Consumption 5 PREMISES … drained and provided with adequate ventilation and cooling and shall comply with the Model Code of Practice for the Welfare of Animals – Livestock at Slaughtering Establishments; (b) a room for …

Page 22

… Australian Standard 6 PROCESSING AREAS OUTCOME REQUIRED Provision of areas for specific unit operations that facilitate hygienic processing of poultry and prevent … slaughtering takes place, stunning equipment shall be provided in accordance with the Model Code of Practice for the Welfare of Animals – Livestock at Slaughtering Establishments. Bleeding area …

Page 51

… Australian Standard for Construction of Premises and Hygienic Production of Poultry Meat for Human Consumption 18 REFERENCES Food Standards Australia New Zealand (2005). Australia New Zealand Food Standards Code. Anstat, Melbourne. Standards Australia (2004). Australian Standard for Food Microbiology – … AS/NZS 9000:2000. Standing Committee on Agriculture (2001). Australian Model Code of Practice for the Welfare of Animals – Livestock at Slaughtering Establishments. SCARM Report No. …

Design and Building Practitioners Regulation 2021 cover 2021

Name

Design and Building Practitioners Regulation 2021 (NSW)

Publisher

NSW Government

Version: 2021 (Current)

This Regulation is the Design and Building Practitioners Regulation 2021. (NSW legislation.)

7 results

found in this document show

Page 6

… ............................................................. 44 97 Alternative pathways for professional engineers and certain design practitioners .......................................... … 45 99 Application of Division … 46 102 Duration of deemed registration … 47 103 Evidence of deemed registration … 47 104 Return of cancelled, suspended or varied registration … .............................................................................. 81 Schedule 4 Code of …

Page 21

… notice to the Secretary that it no longer has a nominee in that class. (5) For the purposes of section 50(2) of the Act, it is a condition of registration as a practitioner that the registered practitioner must comply with the code of practice— (a) for a prescribed practitioner—set out in Schedule 4, Part 2, Division 1, or (b) …

Page 83

… Design and Building Practitioners Regulation 2021 [NSW] 5 Requirements for registered professional engineers (1) A registered professional engineer must successfully complete … of the hours to the next year in a way approved by the Secretary in the Guidelines. Schedule 4 Code of practice clause 36(5) Part 1 Preliminary 1 Definitions In this Schedule— client of a registered …

Page 84

… Regulation 2021 [NSW] work to which this Schedule applies. relevant work means the preparation of a regulated design, provision of a compliance declaration or carrying out of building work by a prescribed practitioner. Part 2 Code of practice Division 1 Code of practice for prescribed practitioners 2 Duties apply to prescribed …

Page 85

… Practitioners Regulation 2021 [NSW] (a) manage and disclose potential or actual conflicts of interest to a client of the practitioner, and (b) avoid actual conflicts of interest if … including in relation to a client, is held securely by the prescribed practitioner. Division 2 Code of practice for professional engineers 8 Duties apply to professional engineers when acting as …

Page 89

… Design and Building Practitioners Regulation 2021 [NSW] 19 Duties regarding supervision of other persons A registered professional engineer who directly supervises a person who is not … in accordance with the requirements prescribed by the Act and this Regulation, including this code of practice, or another Act or law. Schedule 5 Penalty notice offences 1 Application of Schedule …

Page 90

… Section 33(1) $1,650 $5,000 Section 51(4) $1,650 $5,000 Section 56, including a contravention of the code of practice in this Regulation, Schedule 4, but only for clauses 6(3), 7(1), 15(3) and 16(1) of the …

Name

General Guide for Scaffolds and Scaffolding Work

Publisher

Safe Work Australia

Version: 2014. (Current)

Provides information on how to manage risks associated with scaffolds and scaffolding work at a workplace.

7 results

found in this document show

Page 1

… and scaffolding work at a workplace. It is supported by guidance material for specific types of scaffolds and scaffolding, suspended (swing stage) scaffolds, scaffold inspection and … or manage scaffolding work in the workplace. You should read this Guide in conjunction with the Code of Practice: Construction work. Who has duties under the law? Everyone in the workplace has work …

Page 4

… workplace. Deciding what is reasonably practicable includes the availability and suitability of control measures, with a preference for using substitution, isolation or engineering controls … planned. Review control measures Further information on the risk management process is in the Code of Practice: How to manage work health and safety risks. ! Who is involved? You must consult your …

Page 5

… GENERAL GUIDE FOR SCAFFOLDS AND SCAFFOLDING WORK 5 More information on the safe design of plant and structures is in the: Code of Practice: Safe design of structures, and Guide for safe design of plant. The scaffolding …

Page 7

… GENERAL GUIDE FOR SCAFFOLDS AND SCAFFOLDING WORK 7 ! Documentation A range of documentation may be required depending on the scaffolding and scaffold. For example, … report to the principal contractor. Further information on designer’s safety reports is in the Code of Practice: Construction work. Safe work method statements for construction work Erecting a …

Page 9

… site specific health and safety rules. Further information on WHS management plans is in the Code of Practice: Construction work. Plant design registration Prefabricated scaffolding is defined as …

Page 15

… is in the: Information Sheet: Scaffolding work near overhead electric lines, and Code of Practice: Managing electrical risks at the workplace. ! Entry and exit Safe entry and exit is …

Page 16

… the scaffold is constructed from top to bottom—this allows for a clear fall zone in the event of a fall. Fixing and removing trolley tracks on suspension rigs. Erecting or dismantling … removing spurs projecting from the supporting structure. Further information on falls is in the Code of Practice: Managing the risk of falls at workplaces. ! Falling objects Falling object risk …

Flammable refrigerant gases position paper 2022 cover

Name

Flammable refrigerant gases position paper

Publisher

SafeWork NSW

Version: 2022. (Current)

This Position Paper was developed by the Heads of Workplace Safety Authorities (HWSA) and provides information on the obligations of work health and safety duty holders with respect to the use of flammable refrigerant gases at workplaces.

5 results

found in this document show

Page 4

… a) Importers and manufacturers of flammable refrigerant gases must classify the substance in accordance with the GHS3. For … manufacturer must prepare a compliant Safety Data Sheet (SDS) and label. Refer to the model SWA Codes of Practice Preparation of Safety Data Sheets for Hazardous Chemicals and Labelling of Workplace …

Page 7

… substitution and should approve the substitution prior to it proceeding. In the absence of written confirmation from a competent person on the suitability of an alternative … is available in the Department of the Environment, Water, Heritage and the Arts (DEWHA) Code of Practice Control of refrigerant gases during manufacture, installation, servicing or …

Page 8

… For example, safe work procedures should include matters such as: i. Confirming the type of refrigerant present. ii. Do not top up a refrigeration system without first checking for and … a flammable gas (Division 2.1) class label or GHS pictogram. Refer also to the DEWHA Code of Practice Control of refrigerant gases during manufacture, installation, servicing or …

Page 12

… This position paper does not address transport of refrigerant gases, which is covered by jurisdictional Dangerous Goods (Transport) legislation … territories. In most jurisdictions, the requirements of the Australian Dangerous Goods (ADG) Code apply to the transport of flammable refrigerant gases. 5.10 Disposal of Refrigerants … of Refrigeration, Air Conditioning and Heating (AIRAH). (2007). Refrigerant handling code of practice 2007: Part 2 – Systems other than selfcontained low charge systems Australian Institute …

Page 13

… Safe Work Australia. (2018). Guidance on the Classification of Hazardous Chemicals under the Work Health and Safety Regulations. Safe Work Australia. (2015). Model Code of Practice for Labelling of Workplace Hazardous Chemicals Safe Work Australia. (2016). Model Code …

AS 5008-2007 Hygienic rendering of animal products 2007 cover

Name

AS 5008-2007 Hygienic rendering of animal products

Publisher

Standards Australia

Version: Second Edition 2007. (Pending Revision)

Provides minimum requirements for construction, equipment and rendering operations prescribed in this Standard.

1 results

found in this document show

Page 8

… providing compliance with the overall goal can be independently validated through the use of Hazard Analysis Critical Control Point (HACCP) based programs. Where the operator of a … integrated and sustainable agricultural land and water management policies, strategies and practices for the benefit of the community. This Standard falls within the jurisdiction of PIMC. … advice on meat issues involving non-food products from AHC, which advises on standards, codes of practice and guidelines covering rendering, pet food and animal feed. This publication …

Name

General Guide For Cranes

Publisher

Safe Work Australia

Version: 2015. (Current)

Provides information on how to manage the risks of cranes at a workplace.

5 results

found in this document show

Page 2

… It also includes ensuring so far as is reasonably practicable the: provision and maintenance of safe plant including cranes, and safe use, handling, storage and transport of plant. The … people’s health and safety. Further information on the duties relating to cranes is in the Code of Practice: Managing the risks of plant in the workplace. DECEMBER 2015 …

Page 4

… to avoid or reduce the need for pedestrians and vehicles to interact with the crane in the area of operation, and #4 Review control measures use PPE e.g. gloves, hard hats, high visibility … the system is working as planned. Further information on the risk management process is in the Code of Practice: How to manage work health and safety risks. Who is involved? You must consult your …

Page 5

… 5 Hiring a crane Anyone hiring or leasing a crane to others has duties as both a supplier of the crane and as a person with management or control of the crane at the workplace. They must … be provided by the regulator. More information on registrable plant including cranes is in the Code of Practice: Managing the risks of plant in the workplace. Inspection and pre-use safety checks …

Page 9

… GUIDE FOR CRANES 9 Working at height People installing, erecting and dismantling some types of cranes may be exposed to the risk of falling when working at height. An activity carried out … work and requires a safe work method statement (SWMS). Further guidance on SWMS is in the Code of Practice: Construction work. To minimise the risk of workers falling from a height control …

Page 15

… as being in a satisfactory condition before it is used for general lifting. The results of the inspection must be recorded in the crane’s service logbook. Cranes used for demolition … be at least 16 mm and at least 2 metres in length. Further guidance on demolition is in the Code of Practice: Demolition work. Cranes not in use A crane may not be in use if it is unattended, …

Prevention of vehicle roll-aways and safe immobilisation: Fact sheet 2023 cover

Name

Prevention of vehicle roll-aways and safe immobilisation: Fact sheet

Publisher

Safe Work Australia

Version: 2023. (Current)

Provides guidance for persons conducting a business or undertaking and workers about managing the risks of vehicle roll-aways at the workplace.

2 results

found in this document show

Page 2

… The model WHS Regulations also include more specific requirements for PCBUs to manage the risks of plant in the workplace. These duties include ensuring, so far as is reasonably practicable, … any person or thing. Further guidance on the risk management process for plant is in the model Code of Practice: Managing the risks of plant in the workplace. The risk management process Identifying …

Page 7

… Fact sheet Effective use of wheel chocks  Chocks should be placed in the centre of, and square to, the tyre as … Further information is available in the following Safe Work Australia publications:   Model Code of Practice: Managing risks of plant in the workplace Guidance Material - Traffic management You …

Health monitoring: Guide for persons conducting a business or undertaking 2020 cover

Name

Health monitoring: Guide for persons conducting a business or undertaking

Publisher

Safe Work Australia

Version: 2020. (Current)

This guide will help you to understand your duties as a PCBU to provide health monitoring for your workers; it will assist you to comply with your duties under the model WHS laws, but should not be relied on in the place of the full text of those laws.

4 results

found in this document show

Page 10

… eliminate exposure, resulting in possible exposure to your workers. You must monitor the health of your workers. For example, there is a risk of exposure that poses a significant risk to … know if exposure might have been more than the biological exposure standard. Read the model Code of Practice: Managing risks of hazardous chemicals in the workplace for more guidance on …

Page 11

… • what is expected in their health monitoring program o for example, the types and frequency of tests • when they should see the health monitoring doctor • how a health monitoring doctor is … are other things you must consult your workers about at the workplace. Please read the model Code of Practice: WHS consultation, cooperation and coordination for more information about …

Page 17

… workers as determined by the WHS regulator. For more information, see Part 7.2 and Table 14.2 of Schedule 14 to the WHS Regulations or the section on inorganic lead in Health monitoring … about health monitoring for asbestos in Chapter 8 of the WHS Regulations and the model Code of Practice: How to safely remove asbestos. Please read Health monitoring guides for hazardous …

Page 20

… o • for females of reproductive capacity – 10 µg/dL (0.48 µmol/L), or there is an indication a risk control … if your worker can continue to work with hazardous chemicals. You should examine your work practices and procedures to see if tasks are being done correctly and if controls are not … for hazardous chemicals. You will find more information on review of control measures in model Code of Practice: Managing risks of hazardous chemicals in the workplace. Provide a copy of the …

Search all content

Type

Sector

Publishers

Collection

State

Name

AS 1684.3:2021 Residential timber-framed construction, Part 3: Cyclonic areas

Publisher

Standards Australia

1 results

Name

A guide to Australian building product conformity

Publisher

Australian Building Codes Board

1 results

Name

AS 4465-2006 Construction of premises and hygienic production of poultry meat for human consumption

Publisher

Standards Australia

5 results

Name

Design and Building Practitioners Regulation 2021 (NSW)

Publisher

NSW Government

7 results

Name

General Guide for Scaffolds and Scaffolding Work

Publisher

Safe Work Australia

7 results

Name

Flammable refrigerant gases position paper

Publisher

SafeWork NSW

5 results

Name

AS 5008-2007 Hygienic rendering of animal products

Publisher

Standards Australia

1 results

Name

General Guide For Cranes

Publisher

Safe Work Australia

5 results

Name

Prevention of vehicle roll-aways and safe immobilisation: Fact sheet

Publisher

Safe Work Australia

2 results

Name

Health monitoring: Guide for persons conducting a business or undertaking

Publisher

Safe Work Australia

4 results

Search all content

Name AS 1684.3:2021 Residential timber-framed construction, Part 3: Cyclonic areas

Publisher Standards Australia

1 results

Name A guide to Australian building product conformity

Publisher Australian Building Codes Board

1 results

Name AS 4465-2006 Construction of premises and hygienic production of poultry meat for human consumption

Publisher Standards Australia

5 results

Name Design and Building Practitioners Regulation 2021 (NSW)

Publisher NSW Government

7 results

Name General Guide for Scaffolds and Scaffolding Work

Publisher Safe Work Australia

7 results

Name Flammable refrigerant gases position paper

Publisher SafeWork NSW

5 results

Name AS 5008-2007 Hygienic rendering of animal products

Publisher Standards Australia

1 results

Name General Guide For Cranes

Publisher Safe Work Australia

5 results

Name Prevention of vehicle roll-aways and safe immobilisation: Fact sheet

Publisher Safe Work Australia

2 results

Name Health monitoring: Guide for persons conducting a business or undertaking

Publisher Safe Work Australia

4 results

Name

AS 1684.3:2021 Residential timber-framed construction, Part 3: Cyclonic areas

Publisher

Standards Australia

Name

A guide to Australian building product conformity

Publisher

Australian Building Codes Board

Name

AS 4465-2006 Construction of premises and hygienic production of poultry meat for human consumption

Publisher

Standards Australia

Name

Design and Building Practitioners Regulation 2021 (NSW)

Publisher

NSW Government

Name

General Guide for Scaffolds and Scaffolding Work

Publisher

Safe Work Australia

Name

Flammable refrigerant gases position paper

Publisher

SafeWork NSW

Name

AS 5008-2007 Hygienic rendering of animal products

Publisher

Standards Australia

Name

General Guide For Cranes

Publisher

Safe Work Australia

Name

Prevention of vehicle roll-aways and safe immobilisation: Fact sheet

Publisher

Safe Work Australia

Name

Health monitoring: Guide for persons conducting a business or undertaking

Publisher

Safe Work Australia