Search all content

1 - 10 of 29 results
AS/NZS 1260:2017 PVC-U pipes and fittings for drain, waste and vent applications 2017 cover

Standards Australia/Standards New Zealand

Version:  Fifth Edition 2017.  (Current)
Specifies requirements for PVC-U pipes and fittings for sewer, drain, waste and vent applications above ground or below ground and is intended to be used where the pipeline is operating under gravity flow and the operating pressure is low; includes requirements for both plain and structured wall pipes and fittings.
AS/NZS 1170.2:2021 Structural design actions, Part 2: Wind actions 2021 cover

Standards Australia/Standards New Zealand

Version:  Third Edition 2021.  (Current)
Sets out procedures for determining wind speeds and resulting wind actions to be used in the structural design of structures subjected to wind actions other than those caused by tornadoes; to be read in conjunction with AS/NZS 1170.0.
AS/NZS 1720.4:2019 Timber structures, Part 4: Fire resistance of timber elements 2019 cover

Standards Australia/Standards New Zealand

Version:  First Edition 2019.  (Current)
The objective of this Standard is to provide a method for determining the fire resistance for structural adequacy and insulation of sawn timber, timber in pole form, plywood, laminated veneer lumber (LVL), and glued-laminated structural timber elements as an alternative to the test method specified in AS 1530.4.
AS/NZS 1546.1:2008 On-site domestic wastewater treatment units, Part 1: Septic tanks 2008 cover

Standards Australia/Standards New Zealand

Version:  Second Edition 2008.  (Current)
AS/NZS 1546.1 specifies performance requirements and performance criteria for septic tanks, technical means of compliance and provides test specifications that enable septic tanks to be manufactured to comply with the performance requirements and performance criteria.
AS/NZS 4234:2021 Heated water systems - Calculation of energy consumption 2021 cover

Standards Australia/Standards New Zealand

Version:  Third Edition 2021.  (Current)
Sets out a method for evaluating the annual energy performance of water heaters using a combination of test results for component performance and mathematical models to determine the standardized annual supplementary energy use.
AS/NZS 2327:2017 Composite structures - Composite steel-concrete construction in buildings 2017 cover

Standards Australia/Standards New Zealand

Version:  First Edition 2017.  (Current)
Sets out minimum requirements for the design, detailing and construction of simply supported composite beams composed of a steel beam interconnected to a concrete slab by shear connectors, including applications in which the slab incorporates profiled steel sheeting.
AS/NZS 4858:2004 Wet area membranes 2004 cover

Standards Australia/Standards New Zealand

Version:  First Edition 2004.  (Current)
Sets out to classify membranes based on elastic properties, which can then be used to give guidance on the type of detailing for a specific membrane referred to in AS 3740.
AS/NZS 3500.2:2021 Amd 1:2021 Plumbing and drainage, Part 2: Sanitary plumbing and drainage 2021 cover

Standards Australia/Standards New Zealand

Version:  Third Edition 2021.  (Current)
AS/NZS 3500.2:2021 is amended as follows.
AS/NZS 2327:2017 Amd 1:2020 Composite structures - Composite steel-concrete construction in buildings 2020 cover

Standards Australia/Standards New Zealand

Version:  First Edition 2020.  (Current)
The 2017 edition of AS/NZS 2327 is amended as follows; the amendments should be inserted in the appropriate places.
AS/NZS 2293.1:2018 Amd 1:2021 Emergency lighting and exit signs for buildings, Part 1: System design, installation and operation 2021 cover

Standards Australia/Standards New Zealand

Version:  First Edition 2021.  (Current)
The 2018 edition of AS/NZS 2293.1:2018 is amended as follows; the amendments should be inserted in the appropriate place.