Search all content

1 - 10 of 14 results
AS 1668.2-2012 The use of ventilation and airconditioning in buildings, Part 2: Mechanical ventilation in buildings 2012 cover

Standards Australia

Version:  Fifth Edition 2012.  (Pending Revision)
AS 1668.2 2012 sets out requirements for mechanical air-handling systems that ventilate buildings and car parks, and for ventilation based on the need to control odours, particulates and specific gases. Also known as AS 1668 part 2.
AS 3999:2015 Bulk thermal insulation - Installation 2015 cover

Standards Australia

Version:  Second Edition 2015.  (Current)
Sets out requirements on installing insulation in both new dwellings during construction and the retrofitting of insulation in existing buildings.
AS 1530.4:2014 Methods for fire tests on building materials, components and structures, Part 4: Fire-resistance tests for elements of construction 2014 cover

Standards Australia

Version:  Sixth Edition 2014.  (Current)
Sets out test procedures and criteria for the determination of fire-resistance of elements of building construction.
AS/NZS 3837:1998 Method of test for heat and smoke release rates for materials and products using an oxygen consumption calorimeter 1998 cover

Standards Australia/Standards New Zealand

Version:  First Edition 1998.  (Current)
Sets out a test method for the determination of ignitability, heat release rates, mass loss rates, effective heat of combustion and smoke release of materials and products when exposed to controlled levels of radiant heating.
AS 1668.1:2015 The use of ventilation and air conditioning in buildings, Part 1: Fire and smoke control in buildings 2015 cover

Standards Australia

Version:  First Edition 2015.  (Current)
Sets out minimum requirements for the design, construction, installation and commissioning of mechanical smoke control systems in buildings; specific methods of smoke control are defined and the appropriate requirements specified for each.
AS 4072.1-2005 Components for the protection of openings in fire-resistant separating elements, Part 1: Service penetrations and control joints 2005 cover

Standards Australia

Version:  Second Edition 2005.  (Current)
Specifies requirements for the testing, interpretation of test results, and installation of penetration sealing systems and control joints sealing systems in fire-resistant elements of construction.
AS 1905.1:2015 Components for the protection of openings in fire-resistant walls, Part 1: Fire-resistant doorsets 2015 cover

Standards Australia

Version:  Sixth Edition 2015.  (Current)
Sets out requirements for the construction and installation of fire-resistant doorsets that are used to protect openings in walls, and for partitions that are required to resist the passage of fire.
AS/NZS 1530.3:1999 Methods for fire tests on building materials, components and structures, Part 3: Simultaneous determination of ignitability, flame propagation, heat release and smoke release 1999 cover

Standards Australia/Standards New Zealand

Version:  First Edition 1999.  (Current)
Describes a single test method for grading building materials on the basis of ignition tendency, flame spread, heat development and tendency to produce smoke.
AS 1668.4-2012 The use of ventilation and airconditioning in buildings, Part 4: Natural ventilation of buildings 2012 cover

Standards Australia

Version:  Fourth Edition 2012.  (Pending Revision)
Sets out minimum design requirements for natural ventilation systems that ventilate enclosures and requirements for the ventilation of car parks.