Search all content

11 - 20 of 41 results
AS 3999:2015 Bulk thermal insulation - Installation 2015 cover

Standards Australia

Version:  Second Edition 2015.  (Current)
Sets out requirements on installing insulation in both new dwellings during construction and the retrofitting of insulation in existing buildings.
AS 4440-2004 Installation of nailplated timber roof trusses 2004 cover

Standards Australia

Version:  Second Edition 2004.  (Current)
Specifies basic requirements for the bracing, connection and installation of nailplated timber roof trusses. Requirements are given for supporting structures, roof truss installation, roof bracing, truss connection and overhangs.
AS 4597-1999 Installation of roof slates and shingles (Non-interlocking type) 1999 cover

Standards Australia

Version:  First Edition 1999.  (Current)
Sets out requirements for the placement and fixing of terracotta, fibre cement and timber shingles and slates only to roofs of buildings intended for domestic, commercial and light industrial purposes.
AS 1905.2-2005 Components for the protection of openings in fire-resistant walls, Part 2: Fire-resistant roller shutters 2005 cover

Standards Australia

Version:  Fourth Edition 2005.  (Current)
Specifies requirements for design, construction and installation of vertically operating roller shutters intended to protect trafficable openings in fire-rated walls; compliance is based on prototype testing in accordance with AS 1530.4; labelling requirements are included.
Whole-of-Home Efficiency Factors Standard 2022

Australian Building Codes Board

Version:  2022.  (Latest)
This ABCB Standard provides WOH efficiency factors for Class 1 dwellings, Class 2 sole-occupancy units and Class 4 parts of buildings in the energy efficiency provisions of the NCC; It applies in each NCC climate zone and jurisdiction.
Livable Housing Design Standard 2022 cover

Australian Building Codes Board

Version:  2022.  (Latest)
Provides a set of technical provisions that if complied with will enable dwellings to better meet the needs of the community, including older people and people with mobility limitations
Fire Safety Verification Method Standard 2022 cover

Australian Building Codes Board

Version:  2022.  (Latest)
Provides a process for engineering the design of fire safety Performance Solutions. The document provides the flexibility required to develop Performance Solutions while still maintaining the level of safety required by the NCC.
AS/NZS 1530.3:1999 Methods for fire tests on building materials, components and structures, Part 3: Simultaneous determination of ignitability, flame propagation, heat release and smoke release 1999 cover

Standards Australia/Standards New Zealand

Version:  First Edition 1999.  (Current)
Describes a single test method for grading building materials on the basis of ignition tendency, flame spread, heat development and tendency to produce smoke.
AS 4654.2-2012 Waterproofing membranes for external above-ground use, Part 2: Design and installation 2012 cover

Standards Australia

Version:  Second Edition 2012.  (Pending Revision)
Sets out a consistent and reliable approach to the design and installation of external waterproofing membrane systems.