Search all content

Current document versions only

1 - 5 of 5 results

AS/NZS 1596:2014 The storage and handling of LP Gas 2014 cover

Name

AS/NZS 1596:2014 The storage and handling of LP Gas

Publisher

Standards Australia/Standards New Zealand

Version: Fourth Edition 2014. (Current)

Sets out requirements and recommendations for the safe storage and handling of LP Gas, in cylinders and bulk tanks.

8 results

found in this document show

Page 9

… AUSTRALIA/STANDARDS NEW ZEALAND Australian/New Zealand Standard The storage and handling of LP Gas SECTI ON 1 SCOPE AND GENERAL 1.1 SCOPE AND OBJECTIVE This Standard specifies … series. (g) Land transport equipment and operations, as covered— (i) in Australia, by the ADG Code (but excluding references to this Standard that appear in the ADG Code) and AS 2809, Parts … Hazardous Substances (Tank Wagons and Transportable Containers) Regulations 2004. The Code of Practice HSNOCOP 29, Flammable Gases and Oxygen Tank Wagons—A code of practice for the design …

Page 22

… Transfer Notice and amendments. 1.4.61 Tanker A road tank vehicle that meets the requirements of AS 2809.1 and AS 2809.3, or with earlier Standards superseded by AS 2809.3, or with the New Zealand Environmental Protection Authority (EPA) Approved Code of Practice for ‘Flammable Gases and Oxygen Tank Wagons’. 1.4.62 Thermal screen A wall or other …

Page 31

… 29 SECTI ON 4 CYLINDE RS AND SYSTE M S AS/NZS 1596:2014 CYL I NDER 4.1 SCOPE AND APPLICATION OF SECTION This Section provides requirements and recommendations for the location, design and … cylinders shall conform with the New Zealand Environmental Protection Authority (EPA) Approved Code of Practice, In-situ Filling of LPG Cylinders, available from the Liquefied Petroleum Gas …

Page 41

… 1596:2014 4.4.12 Additional requirements for cylinders for in situ filling An installation of cylinders intended for in situ filling shall comply with the following requirements: (a) … cylinders shall conform to the New Zealand Environmental Protection Authority (EPA) Approved Code of Practice HSNOCOP 38, ‘In-situ Filling of LPG Cylinders’ available from the LPGA. 4.5 CYLINDER …

Page 87

… 85 AS/NZS 1596:2014 SECTI ON 9 CYLINDE R FILLING INSTALLATI ONS  NE W ZEAL AND 9.1 SCOPE OF SECTION This Section provides requirements for installations for the filling of cylinders … or (b) A cylinder mounted on any other type of vehicle; or (c) A cylinder operating under a code of practice approved by the New Zealand Environmental Protection Authority (EPA) relating to …

Page 105

… 103 SECTI ON 11 AS/NZS 1596:2014 OPE RATIONS 11.1 SCOPE OF SECTION This Section sets out procedures for the operation and upkeep of an LP Gas … Requirements Where LP Gas is to be transported, handled, or stored, the requirements of the ADG Code/The New Zealand Land Transport Rule Dangerous Goods and this Section shall be satisfied. … NZS 5263:2003 (Gas detection and odourization); or (b) odourized in accordance with a code of practice approved by the authority. 4 The possibility of odour fade should be considered …

Page 131

… 129 AS/NZS 1596:2014 AS/NZS A1 2832 2832.1 Cathodic protection of metals Part 1: Pipes and cables 2865 3000 Safe working in a confined space Electrical … Transport of dangerous goods on land 5435 Specification for liquefied petroleum gas (LPG) 5807 Code of practice for industrial identification by colour, wording or other coding NZS/AS 1657 NZS/BS 750 …

Page 133

… 131 AS/NZS 1596:2014 US DEPARTMENT OF TRANSPORTATION Hazardous Materials Regulations NEW ZEALAND Statutes Hazardous Substances and … Transportable Containers) Regulations 2004 Land Transport Rule: Dangerous Goods 2005 Approved Codes of Practice HSNOCOP 29—Flammable Gases and Oxygen Tank Wagons LPG Compliance 100 kg to 300 kg …

AS/NZS IEC 60079.10.1:2022 Explosive atmospheres, Part 10.1: Classification of areas - Explosive gas atmospheres 2022 cover

Name

AS/NZS IEC 60079.10.1:2022 Explosive atmospheres, Part 10.1: Classification of areas - Explosive gas atmospheres

Publisher

Standards Australia/Standards New Zealand

Version: First Edition 2022. (Current)

AS/NZS IEC 60079.10.1:2022 adopts IEC 60079 10 1:2020, which specify requirements for the classification of areas where flammable gas or vapour hazards may arise and may then be used as a basis to support the proper design, construction, operation and maintenance of equipment for use in hazardous areas.

6 results

found in this document show

Page 21

… IEC 60079-10-1:2020 © IEC 2020 – 17 – AS/NZS IEC 60079.10.1:2022 In the case of activities other than those of normal operation, e.g. commissioning or nonroutine … controls as possible according to the current state of the art and in accordance with relevant codes and standards. This document provides guidance on aspects that should be considered and the classification of hazardous areas requires the application of good engineering practice. 4.2 Hazardous area classification objectives Hazardous area classification is a method …

Page 24

… before plant start-up. Consideration should always be given to the type, number and location of various potential points of release so that relevant zone and boundary conditions are … of the particular factors involved. Such factors could include: levels of cleanliness, industry practice, competency and training of personnel handling the flammable substances, other spill or … to applications such as laboratories, small refrigerant systems or cylinders of NOTE 2 Industry codes commonly identify quantities below which the hazardous area classification process would …

Page 90

… – 86 – IEC 60079-10-1:2020 © IEC 2020 Figure E.12 – Hazardous distance (Example No. 5) Extent of zone (see Figure E.12, r extent of zone is approximately 1,0 m due to surrounding … details may vary depending on the specific installation details or application of the relevant code of practice. This example has been taken because it contains a variety of forms of release which …

Page 114

… AS/NZS IEC 60079.10.1:2022 Country or Region of Origin – 110 – Code or Standard Designation TRGS 510 Title Lagerung von Gefahrstoffen in … gas explosion hazard, based on NEN-ENIEC 60079-10-1 UK EI15 Energy Institute Model code of safe practice for the petroleum industry, Part 15: Area Classification Code for Petroleum …

Page 115

… IEC 60079-10-1:2020 © IEC 2020 Country or Region of Origin Code or Standard Designation NFPA 497 AS/NZS IEC 60079.10.1:2022 – 111 – Title Developing Body Application Notes National Fire Recommended Protection Practice for the Classification of Association Flammable Liquids, Gases, or Vapours and of …

Page 116

… – IEC 60079-10-1:2020 © IEC 2020 Bibliography [1] A.W. Cox; F.P. Lee & M.L. Ang; Classification of Hazardous Locations, Ichem, 1993 [2] IGEM/SR/25; Hazardous Area Classification of Natural Gas … of High Flashpoint Liquid Fuels. Int. Symposium on Combustion [13] The Energy Institute, Model Code of Safe Practice – Part 15 – Area Classification Code for Installations Handling Flammable Fluids; 4 th …

AS/NZS 5601.1:2022 Gas installations, Part 1: General installations 2022 cover

Name

AS/NZS 5601.1:2022 Gas installations, Part 1: General installations

Publisher

Standards Australia/Standards New Zealand

Version: Third Edition 2022. (Current)

Sets out requirements and means of conformance for the design, installation and commissioning of gas installations that are associated with the use or intended use of fuel gases such as natural gas, LP Gas, or biogas.

AS/NZS 5601.2:2020 Gas installations, Part 2: LP Gas installations in caravans and boats for non-propulsive purposes 2020 cover

Name

AS/NZS 5601.2:2020 Gas installations, Part 2: LP Gas installations in caravans and boats for non-propulsive purposes

Publisher

Standards Australia/Standards New Zealand

Version: Third Edition 2020. (Current)

Specifies requirements and means of conformance for the design, installation and commissioning of LP Gas installations in caravans and boats for non-propulsive purposes.

AS/NZS IEC 60079.10.1:2022 Sup 1:2022 Explosive atmospheres, Part 10.1: Classification of areas - Explosive gas atmospheres - Commentary (Supplement 1 to AS/NZS IEC 60079.10.1:2022) 2022 cover

Name

AS/NZS IEC 60079.10.1:2022 Sup 1:2022 Explosive atmospheres, Part 10.1: Classification of areas - Explosive gas atmospheres - Commentary (Supplement 1 to AS/NZS IEC 60079.10.1:2022)

Publisher

Standards Australia/Standards New Zealand

Version: First Edition 2022. (Current)

AS/NZS IEC 60079.10.1:2022 Sup 1:2022 provides commentary and additional information to support the application of AS/NZS IEC 60079.10.1:2022.

4 results

found in this document show

Page 20

… AS/NZS IEC 60079.10.1:2022 Sup 1:2022 C7.2 C7.2.1 10 Main types of ventilation General Other codes and standards have specific requirements for ventilation … to assessment by other methods according to the Standard or other relevant industry standard practice. C7.2.4 Degree of dilution To specify that plant or equipment is located in “open air” …

Page 44

… and B.2 are common application examples [see Clause A.1(b)]. In accordance with good workshop practice, it is expected that spills or releases of fuel would be limited, and the examples are provided on this basis. If significant quantities … of the following: (a) Mechanical ventilation (for example, as required by the relevant building code for vehicle parking areas). (b) Natural ventilation. (c) Removal of a vehicle that is …

Page 159

… and battery installations ISO 80079 (all parts), Explosive atmospheres EN 1010, Safety of machinery. Safety requirements for the design and construction of printing and paper … Fire and explosion precautions at premises handling flammable gases, liquids and dusts – Code of practice for precautions against fire and explosion in chemical plants, chemical storage and …

Page 160

… AS/NZS IEC 60079.10.1:2022 Sup 1:2022 150 BS 5925, Code of practice for ventilation principles and designing for natural ventilation CIBSE Guide A, …

Search all content

Sector

Publishers

Collection

State