Type
Publisher
Standards Australia
Publisher
Standards Australia
Version:
Fifth Edition 2021.
(Current)
Short Description
Sets out procedures for the selection and installation of glass in buildings, subject to wind loading, human impact, and special applications. Glass strength is specified, based on the tensile stresses on the surface of the glass.
filter_list
1 results
found in this document show keyboard_arrow_down keyboard_arrow_upType
Publisher
Standards Australia/Standards New Zealand
Publisher
Standards Australia/Standards New Zealand
Version:
Fourth Edition 2014.
(Current)
Short Description
Sets out requirements and recommendations for the safe storage and handling of LP Gas, in cylinders and bulk tanks.
filter_list
8 results
found in this document show keyboard_arrow_down keyboard_arrow_upType
Publisher
Standards Australia/Standards New Zealand
Publisher
Standards Australia/Standards New Zealand
Version:
First Edition 2022.
(Current)
Short Description
AS/NZS IEC 60079.10.1:2022 adopts IEC 60079 10 1:2020, which specify requirements for the classification of areas where flammable gas or vapour hazards may arise and may then be used as a basis to support the proper design, construction, operation and maintenance of equipment for use in hazardous areas.
filter_list
6 results
found in this document show keyboard_arrow_down keyboard_arrow_upType
Publisher
Standards Australia
Publisher
Standards Australia
Version:
Fourth Edition 2023.
(Current)
Short Description
Specifies requirements and safety principles for the design, installation and operation of industrial appliances that involve the combustion of gas or liquid fuel and the controlled generation of combustible vapours or combustible dusts.
filter_list
9 results
found in this document show keyboard_arrow_down keyboard_arrow_upType
Publisher
Standards Australia/Standards New Zealand
Publisher
Standards Australia/Standards New Zealand
Version:
First Edition 1999.
(Current)
Short Description
Sets out requirements for the materials, design and installation of corrugated fibre-reinforced cement roof and wall cladding; provides test procedures for the determination of resistance to wind force; appendix gives advice on the provision of roof ventilation.
filter_list
1 results
found in this document show keyboard_arrow_down keyboard_arrow_upType
Publisher
Standards Australia
Publisher
Standards Australia
Version:
Seventh Edition 2018.
(Current)
Short Description
Specifies the uniform minimum requirements for the design, construction and safe operation of Type B appliances that are intended for use with town gas, natural gas, simulated natural gas, liquefied petroleum gas and tempered liquefied petroleum gas or any combination of these gases either together or with other fuels.
filter_list
4 results
found in this document show keyboard_arrow_down keyboard_arrow_upType
Publisher
Standards Australia
Publisher
Standards Australia
Version:
Second Edition 2015.
(Current)
Short Description
Sets out requirements on installing insulation in both new dwellings during construction and the retrofitting of insulation in existing buildings.
filter_list
1 results
found in this document show keyboard_arrow_down keyboard_arrow_upType
Publisher
Standards Australia/Standards New Zealand
Publisher
Standards Australia/Standards New Zealand
Version:
Third Edition 2022.
(Current)
Short Description
Sets out requirements and means of conformance for the design, installation and commissioning of gas installations that are associated with the use or intended use of fuel gases such as natural gas, LP Gas, or biogas.
Type
Publisher
Standards Australia
Publisher
Standards Australia
Version:
Third Edition 2006.
(Current)
Short Description
Specifies minimum requirements for the materials, design, fabrication, testing, inspection, reports and pre-commissioning of piping subject to internal or external pressure.
filter_list
1 results
found in this document show keyboard_arrow_down keyboard_arrow_upType
Publisher
Standards Australia
Publisher
Standards Australia
Version:
Second Edition 2018.
(Current)
Short Description
This Standard sets out requirements for the design and installation of self-supporting metal roof and wall cladding, subjected to out-of-plane external actions and in-plane thermally induced actions, permanent actions on walls and steep roofs and frictional drag of wind and snow actions.
filter_list