Search all content

Current document versions only

1 - 10 of 10 results

AS 1288:2021 Glass in buildings - Selection and installation 2021 cover

Name

AS 1288:2021 Glass in buildings - Selection and installation

Publisher

Standards Australia

Version: Fifth Edition 2021. (Current)

Sets out procedures for the selection and installation of glass in buildings, subject to wind loading, human impact, and special applications. Glass strength is specified, based on the tensile stresses on the surface of the glass.

1 results

found in this document show

Page 4

… by the Joint Standards Australia/Standards New Zealand Committee BD‑007, Glazing and Fixing of Glass, to supersede AS 1288—2006. The objective of this document is to provide uniform … and to clarify technical definitions. This document will be referenced in the Building Code of Australia 2022; thereby superseding AS 1288—2006. The most significant changes of this … Sections 1, 6 and 7 only). This document makes recommendations for design and installation practice based on proven techniques. Notes to the text contain information and guidance. They …

AS 1428.1:2021 Design for access and mobility, Part 1: General requirements for access - New building work 2021 cover

Name

AS 1428.1:2021 Design for access and mobility, Part 1: General requirements for access - New building work

Publisher

Standards Australia

Version: Sixth Edition 2021. (Current)

Specifies the design requirements for new building work, as required by the National Construction Code (NCC) and the Disability (Access to Premises—Buildings) Standards (Premises Standards), to provide access for people with disabilities.

AS 3999:2015 Bulk thermal insulation - Installation 2015 cover

Name

AS 3999:2015 Bulk thermal insulation - Installation

Publisher

Standards Australia

Version: Second Edition 2015. (Current)

Sets out requirements on installing insulation in both new dwellings during construction and the retrofitting of insulation in existing buildings.

1 results

found in this document show

Page 23

… gaps, joints and thermal bypass The following requirements apply: (a) Gaps around the edges of insulation segments, on all four edges, both sides or gaps at the top and bottom shall be … and compression shall be avoided as this will reduce the effectiveness of insulation. C3.2.1 In practice, the R-value of a building element will depend the material R-value of the insulation … installation itself. R-values for building elements are specified in the National Construction Code (NCC), so insulation must be conformance is achieved. to a large extent on the quality of …

AS 2047-2014 Windows and external glazed doors in buildings 2014 cover

Name

AS 2047-2014 Windows and external glazed doors in buildings

Publisher

Standards Australia

Version: Third Edition 2014. (Current)

Sets out requirements for materials, construction, installation and glazing for external windows, sliding and swinging glazed doors, including French and bi-fold doors, adjustable louvres, shopfronts and window walls with one-piece framing elements.

1 results

found in this document show

Page 9

… Aluminium and aluminium alloys—Extruded rod, bar, solid and hollow shapes 2098 2098.2 Methods of test for veneer and plywood Part 2: Bond quality of plywood (chisel test) 2904 Damp-proof … ABCB NCC BS 4842 BS EN 513 12608 ASTM D4216 G151 www.standards.org.au National Construction Code Specification for liquid organic coatings for application to aluminium alloy extrusions, … Related PVC and Chlorinated Poly(Vinyl Chloride) (CPVC) Building Products Compounds Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory …

AS 3959:2018 Construction of buildings in bushfire-prone areas 2018 cover

Name

AS 3959:2018 Construction of buildings in bushfire-prone areas

Publisher

Standards Australia

Version: Fourth Edition 2018. (Current)

Specifies requirements for the construction of buildings in bushfire-prone areas in order to improve their resistance to bushfire attack from burning embers, radiant heat, flame contact and combinations of the three attack forms.

1 results

found in this document show

Page 9

… at risk. 1.4 NORMATIVE REFERENCES The following documents are indispensable to the application of this Standard. NOTE: Documents referenced for informative purposes are listed in the … Particular requirements for humidifiers (IEC 60335-2-98 Ed 2.2, MOD) ASTM D2898 NCC Standard Practice for Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing National Construction Code www.standards.org.au  Standards Australia …

AS 2050:2018 Installation of Roof Tiles 2018 cover

Name

AS 2050:2018 Installation of Roof Tiles

Publisher

Standards Australia

Version: Fifth Edition 2018. (Current)

This Standard sets out requirements for the placement and installing of roof tiles of the types specified in AS 2049.

AS 4597-1999 Installation of roof slates and shingles (Non-interlocking type) 1999 cover

Name

AS 4597-1999 Installation of roof slates and shingles (Non-interlocking type)

Publisher

Standards Australia

Version: First Edition 1999. (Current)

Sets out requirements for the placement and fixing of terracotta, fibre cement and timber shingles and slates only to roofs of buildings intended for domestic, commercial and light industrial purposes.

AS 4666:2012 Insulating glass units 2012 cover

Name

AS 4666:2012 Insulating glass units

Publisher

Standards Australia

Version: Second Edition 2012. (Current)

Sets out requirements and guidelines for the long term type testing, glazing, periodic manufacturing testing and other associated aspects to do with insulating glass units.

1 results

found in this document show

Page 10

… Part 6 Factory production control and periodic tests A1 NZS 4223 4223.1 4223.2 4223.3 4223.4 Code of practice for glazing in buildings Part 1: Glass selection and glazing Part 2: Insulating glass …

AS 4440-2004 Installation of nailplated timber roof trusses 2004 cover

Name

AS 4440-2004 Installation of nailplated timber roof trusses

Publisher

Standards Australia

Version: Second Edition 2004. (Current)

Specifies basic requirements for the bracing, connection and installation of nailplated timber roof trusses. Requirements are given for supporting structures, roof truss installation, roof bracing, truss connection and overhangs.