Search all content

11 - 20 of 32 results
AS 1670.4:2018 Fire detection, warning, control and intercom systems - System design, installation and commissioning, Part 4: Emergency warning and intercom systems 2018 cover

Standards Australia

Version:  Third Edition 2018.  (Current)
Specifies the design, installation and commissioning requirements for emergency warning systems and emergency intercom systems used in buildings for the evacuation of building occupants in the event of a fire or other type of emergency.
Whole-of-Home Efficiency Factors Standard 2022

Australian Building Codes Board

Version:  2022.  (Latest)
This ABCB Standard provides WOH efficiency factors for Class 1 dwellings, Class 2 sole-occupancy units and Class 4 parts of buildings in the energy efficiency provisions of the NCC; It applies in each NCC climate zone and jurisdiction.
Livable Housing Design Standard 2022 cover

Australian Building Codes Board

Version:  2022.  (Latest)
Provides a set of technical provisions that if complied with will enable dwellings to better meet the needs of the community, including older people and people with mobility limitations
Fire Safety Verification Method Standard 2022 cover

Australian Building Codes Board

Version:  2022.  (Latest)
Provides a process for engineering the design of fire safety Performance Solutions. The document provides the flexibility required to develop Performance Solutions while still maintaining the level of safety required by the NCC.
AS 4654.1-2012 Waterproofing membranes for external above-ground use, Part 1: Materials 2012 cover

Standards Australia

Version:  Second Edition 2012.  (Pending Revision)
Sets out requirements for waterproofing membranes for external above-ground use, installed in accordance with AS 4654.2.
AS 4654.2-2012 Waterproofing membranes for external above-ground use, Part 2: Design and installation 2012 cover

Standards Australia

Version:  Second Edition 2012.  (Pending Revision)
Sets out a consistent and reliable approach to the design and installation of external waterproofing membrane systems.
AS 3740:2021 Waterproofing of domestic wet areas 2021 cover

Standards Australia

Version:  Fifth Edition 2021.  (Current)
Sets out minimum requirements for the materials, design and installation of waterproofing for domestic wet areas in Class 1, Class 2 and Class 4 buildings as defined in the NCC. It also applies to wet areas within Class 3 to 9 buildings as if it were a Class 2 or 4 part of a building.
ABCB Housing Provisions Standard 2022 cover

Australian Building Codes Board

Version:  2022.  (Latest)
Contains Deemed-to-Satisfy Provisions that are considered to be acceptable forms of construction that meet the requirements for complying with Parts H1 to H8 of NCC Volume Two.
AS/NZS 3013:2005 Electrical installations - Classification of the fire and mechanical performance of wiring system elements 2005 cover

Standards Australia/Standards New Zealand

Version:  Third Edition 2005.  (Current)
Sets out a classification scheme for wiring systems according to their resistance to the hazards of fire and mechanical damage.
NatHERS Heating and Cooling Load Limits Standard cover 2022

Australian Building Codes Board

Version:  2022.  (Latest)
NatHERS compliance pathway for energy efficiency.