Search all content

1 - 10 of 18 results
AS/NZS 5601.2:2020 Gas installations, Part 2: LP Gas installations in caravans and boats for non-propulsive purposes 2020 cover

Standards Australia/Standards New Zealand

Version:  Third Edition 2020.  (Current)
Specifies requirements and means of conformance for the design, installation and commissioning of LP Gas installations in caravans and boats for non-propulsive purposes.
AS/NZS 5601.1:2022 Gas installations, Part 1: General installations 2022 cover

Standards Australia/Standards New Zealand

Version:  Third Edition 2022.  (Current)
Sets out requirements and means of conformance for the design, installation and commissioning of gas installations that are associated with the use or intended use of fuel gases such as natural gas, LP Gas, or biogas.
AS 3740:2021 Waterproofing of domestic wet areas 2021 cover

Standards Australia

Version:  Fifth Edition 2021.  (Current)
Sets out minimum requirements for the materials, design and installation of waterproofing for domestic wet areas in Class 1, Class 2 and Class 4 buildings as defined in the NCC. It also applies to wet areas within Class 3 to 9 buildings as if it were a Class 2 or 4 part of a building.
AS/NZS IEC 60079.10.1:2022 Explosive atmospheres, Part 10.1: Classification of areas - Explosive gas atmospheres 2022 cover

Standards Australia/Standards New Zealand

Version:  First Edition 2022.  (Current)
AS/NZS IEC 60079.10.1:2022 adopts IEC 60079 10 1:2020, which specify requirements for the classification of areas where flammable gas or vapour hazards may arise and may then be used as a basis to support the proper design, construction, operation and maintenance of equipment for use in hazardous areas.
AS 4041-2006 Pressure piping 2006 cover

Standards Australia

Version:  Third Edition 2006.  (Current)
Specifies minimum requirements for the materials, design, fabrication, testing, inspection, reports and pre-commissioning of piping subject to internal or external pressure.
AS 4575:2019 Gas appliances - Servicing of Type A appliances 2019 cover

Standards Australia

Version:  Second Edition 2019.  (Current)
The objective of this Standard is to specify essential requirements and basic standards for the delivery of Type A gas appliance servicing, repair, testing and conversion from one gas type to another.
AS/NZS 4645.3:2018 Gas distribution networks, Part 3: Plastics pipe systems 2018 cover

Standards Australia/Standards New Zealand

Version:  Second Edition 2018.  (Current)
Specifies materials, design, construction, installation, testing and maintenance requirements for below ground plastics gas distribution networks to be used in conjunction with AS/NZS 4645.1, for the distribution of fuel gas suitable for domestic, commercial or industrial uses.
AS/NZS 1596:2014 The storage and handling of LP Gas 2014 cover

Standards Australia/Standards New Zealand

Version:  Fourth Edition 2014.  (Current)
​Sets out requirements and recommendations for the safe storage and handling of LP Gas, in cylinders and bulk tanks.
AS 3958:2023 Installation of ceramic and stone tiles 2023 cover

Standards Australia

Version:  Third Edition 2023.  (Current)
AS 3958:2023 provides instructions on the preparation of the background and the bonded fixing and grouting of floor and wall tiles including mosaic tiles and panels.
AS 3814:2018 Industrial and commercial gas-fired appliances 2018 cover

Standards Australia

Version:  Seventh Edition 2018.  (Current)
Specifies the uniform minimum requirements for the design, construction and safe operation of Type B appliances that are intended for use with town gas, natural gas, simulated natural gas, liquefied petroleum gas and tempered liquefied petroleum gas or any combination of these gases either together or with other fuels.