Search all content

1 - 10 of 25 results
AS/NZS 5601.2:2020 Gas installations, Part 2: LP Gas installations in caravans and boats for non-propulsive purposes 2020 cover

Standards Australia/Standards New Zealand

Version:  Third Edition 2020.  (Current)
Specifies requirements and means of conformance for the design, installation and commissioning of LP Gas installations in caravans and boats for non-propulsive purposes.
AS/NZS 5601.1:2022 Gas installations, Part 1: General installations 2022 cover

Standards Australia/Standards New Zealand

Version:  Third Edition 2022.  (Current)
Sets out requirements and means of conformance for the design, installation and commissioning of gas installations that are associated with the use or intended use of fuel gases such as natural gas, LP Gas, or biogas.
AS 4055:2021 Wind loads for housing 2021 cover

Standards Australia

Version:  Fourth Edition 2021.  (Current)
Specifies site wind speed classes for determining design wind speeds and wind loads for NCC Class 1 and 10 buildings within the geometric limits given in Clause 1.2; the classes are for use in the design of housing and for design, manufacturing and specifying of building products and systems used for housing.
AS 4666:2012 Insulating glass units 2012 cover

Standards Australia

Version:  Second Edition 2012.  (Current)
Sets out requirements and guidelines for the long term type testing, glazing, periodic manufacturing testing and other associated aspects to do with insulating glass units.
AS 1428.1:2021 Design for access and mobility, Part 1: General requirements for access - New building work 2021 cover

Standards Australia

Version:  Sixth Edition 2021.  (Current)
Specifies the design requirements for new building work, as required by the National Construction Code (NCC) and the Disability (Access to Premises—Buildings) Standards (Premises Standards), to provide access for people with disabilities.
AS/NZS 1891.4:2009 Industrial fall-arrest systems and devices, Part 4: Selection, use and maintenance 2009 cover

Standards Australia/Standards New Zealand

Version:  Second Edition 2009.  (Pending Revision)
Specifies requirements and sets out recommendations for the selection, safe use and maintenance of industrial fall-arrest systems and devices based on the use of safety harnesses, horizontal life lines and rails, fall-arrest devices, and associated lanyards, connectors, anchorages and fittings.
AS/NZS IEC 60079.10.1:2022 Explosive atmospheres, Part 10.1: Classification of areas - Explosive gas atmospheres 2022 cover

Standards Australia/Standards New Zealand

Version:  First Edition 2022.  (Current)
AS/NZS IEC 60079.10.1:2022 adopts IEC 60079 10 1:2020, which specify requirements for the classification of areas where flammable gas or vapour hazards may arise and may then be used as a basis to support the proper design, construction, operation and maintenance of equipment for use in hazardous areas.
AS 1657:2018 Fixed platforms, walkways, stairways and ladders - Design, construction and installation 2018 cover

Standards Australia

Version:  Fifth Edition 2018.  (Current)
Sets out requirements for the design, selection, construction and installation of fixed platforms, walkways, stairways and ladders that are intended to provide safe access to places used by operating, inspection, maintenance and servicing personnel.
AS/NZS 4667:2000 Quality requirements for cut-to-size and processed glass 2000 cover

Standards Australia/Standards New Zealand

Version:  First Edition 2000.  (Current)
Sets out the quality requirements for cut sizes of flat, transparent, clear ordinary annealed, tinted heat-absorbing, patterned and wired glass for general glazing and/or further processing.
AS 4041-2006 Pressure piping 2006 cover

Standards Australia

Version:  Third Edition 2006.  (Current)
Specifies minimum requirements for the materials, design, fabrication, testing, inspection, reports and pre-commissioning of piping subject to internal or external pressure.