Search all content

11 - 20 of 36 results
AS 1670.1:2018 Fire detection, warning, control and intercom systems - System design, installation and commissioning, Part 1: Fire 2018 cover

Standards Australia

Version:  Fourth Edition 2018.  (Current)
Sets out requirement for the design, installation and commissioning of fire detection and alarm systems comprising components conforming to the requirements of the appropriate component Standards.
AS 1670.3:2018 Fire detection, warning, control and intercom systems - System design, installation and commissioning, Part 3: Fire alarm monitoring 2018 cover

Standards Australia

Version:  Fourth Edition 2018.  (Current)
Specifies the requirements for fire alarm monitoring systems between the monitored fire detection and alarm system and the fire dispatch centre and includes requirements for the monitoring equipment.
AS 1670.4:2018 Fire detection, warning, control and intercom systems - System design, installation and commissioning, Part 4: Emergency warning and intercom systems 2018 cover

Standards Australia

Version:  Third Edition 2018.  (Current)
Specifies the design, installation and commissioning requirements for emergency warning systems and emergency intercom systems used in buildings for the evacuation of building occupants in the event of a fire or other type of emergency.
Whole-of-Home Efficiency Factors Standard 2022

Australian Building Codes Board

Version:  2022.  (Latest)
This ABCB Standard provides WOH efficiency factors for Class 1 dwellings, Class 2 sole-occupancy units and Class 4 parts of buildings in the energy efficiency provisions of the NCC; It applies in each NCC climate zone and jurisdiction.
Livable Housing Design Standard 2022 cover

Australian Building Codes Board

Version:  2022.  (Latest)
Provides a set of technical provisions that if complied with will enable dwellings to better meet the needs of the community, including older people and people with mobility limitations
Fire Safety Verification Method Standard 2022 cover

Australian Building Codes Board

Version:  2022.  (Latest)
Provides a process for engineering the design of fire safety Performance Solutions. The document provides the flexibility required to develop Performance Solutions while still maintaining the level of safety required by the NCC.
AS 4041-2006 Pressure piping 2006 cover

Standards Australia

Version:  Third Edition 2006.  (Current)
Specifies minimum requirements for the materials, design, fabrication, testing, inspection, reports and pre-commissioning of piping subject to internal or external pressure.
AS 4575:2019 Gas appliances - Servicing of Type A appliances 2019 cover

Standards Australia

Version:  Second Edition 2019.  (Current)
The objective of this Standard is to specify essential requirements and basic standards for the delivery of Type A gas appliance servicing, repair, testing and conversion from one gas type to another.
AS/NZS IEC 60079.10.1:2022 Explosive atmospheres, Part 10.1: Classification of areas - Explosive gas atmospheres 2022 cover

Standards Australia/Standards New Zealand

Version:  First Edition 2022.  (Current)
AS/NZS IEC 60079.10.1:2022 adopts IEC 60079 10 1:2020, which specify requirements for the classification of areas where flammable gas or vapour hazards may arise and may then be used as a basis to support the proper design, construction, operation and maintenance of equipment for use in hazardous areas.
ABCB Housing Provisions Standard 2022 cover

Australian Building Codes Board

Version:  2022.  (Latest)
Contains Deemed-to-Satisfy Provisions that are considered to be acceptable forms of construction that meet the requirements for complying with Parts H1 to H8 of NCC Volume Two.