Search all content

1 - 10 of 26 results
AS 5637.1:2015 Determination of fire hazard properties, Part 1: Wall and ceiling linings 2015 cover

Standards Australia

Version:  First Edition 2015.  (Current)
Sets out procedures for the assessment of internal wall and ceiling linings according to their tendency to ignite; their tendency to release heat once ignition has occurred; their tendency to cause flashover; their tendency to release smoke; and their contribution to fire growth.
AS 1735.11-1986 SAA Lift Code, Part 11: Fire-rated landing doors 1986 cover

Standards Australia

Version:  Third Edition 1986.  (Current)
Sets out requirements for fire-rated landing doors for retarding the passage of fire through openings in fire-rated liftwells; it applies where doors are required to have a fire-rating certificate.
AS 1530.1-1994 Methods for fire tests on building materials, components and structures, Part 1: Combustibility test for materials 1994 cover

Standards Australia

Version:  Third Edition 1994.  (Current)
Sets out a test method for determining the combustibility of building materials and is one of a series of test methods for evaluating the potential fire hazard of building products.
AS 1530.4:2014 Methods for fire tests on building materials, components and structures, Part 4: Fire-resistance tests for elements of construction 2014 cover

Standards Australia

Version:  Sixth Edition 2014.  (Current)
Sets out test procedures and criteria for the determination of fire-resistance of elements of building construction.
AS 4055:2021 Wind loads for housing 2021 cover

Standards Australia

Version:  Fourth Edition 2021.  (Current)
Specifies site wind speed classes for determining design wind speeds and wind loads for NCC Class 1 and 10 buildings within the geometric limits given in Clause 1.2; the classes are for use in the design of housing and for design, manufacturing and specifying of building products and systems used for housing.
AS 4666:2012 Insulating glass units 2012 cover

Standards Australia

Version:  Second Edition 2012.  (Current)
Sets out requirements and guidelines for the long term type testing, glazing, periodic manufacturing testing and other associated aspects to do with insulating glass units.
AS 1428.1:2021 Design for access and mobility, Part 1: General requirements for access - New building work 2021 cover

Standards Australia

Version:  Sixth Edition 2021.  (Current)
Specifies the design requirements for new building work, as required by the National Construction Code (NCC) and the Disability (Access to Premises—Buildings) Standards (Premises Standards), to provide access for people with disabilities.
AS 2870-2011 Residential slabs and footings 2011 cover

Standards Australia

Version:  Fourth Edition 2011.  (Pending Revision)
Sets out requirements for the classification of a site and the design and construction of a footing system for a single dwelling house, town house or the like which may be detached or separated by a party wall or common wall but not situated vertically above or below another dwelling.
AS 3610-1995 Formwork for concrete 1995 cover

Standards Australia

Version:  Second Edition 1995.  (Current)
Specifies requirements for the design, fabrication, erection and stripping of formwork as well as the evaluation and repair of the formed concrete surface; colour evaluation charts are included in an Appendix.